Tag: Camaro

Holley (223-02): iNTECH Cold Air Intake for ’10-’15 Camaro 6.2L V8

David Ayers Leave a comment
Use This Post Clip for Email

Shipping July 7, the patent-pending 223-02 iNTECH cold air intake from Holley represents the highest level of technology, style, and performance for your 2010–2015 Chevy Camaro (5th generation) 6.2L V8. Dyno tests saw increases of 19.04 HP and 16.55 ft. lb. of torque with a broad power curve.  iNTECH sealed intakes feature a unique Slip-Seal housing–filter tube interface that eliminates the use of clamps and adapters to achieve a seamless installation, while the four-layer dry air filter eliminates the use of oils that can damage MAF sensors and trigger check engine lights.

Holley designed the housing to match your Camaro’s engine compartment, including retaining factory mounting locations to enable a simple installation.

Features

  • For 2010–2015 Chevy Camaro 6.2L V8.
  • +19.04 horsepower and +16.55 foot-pounds’ torque in dyno tests.
  • Slip-Seal interface eliminates the use of hose clamps and adapters.
  • One-piece, fully sealed intake housing design guarantees a true fresh-air intake charge.
  • Factory mounting locations allow for a simple, secure installation.
  • High-flow, washable, reusable 4-layer dry performance air filter.
  • Inner and outer aluminum mesh air filter media prevents filter deformation and rust.
  • Bellows-style silicone coupler at throttle body accommodates nitrous plates or throttle body spacers without cutting the tube.
  • Enhances the look of your engine bay with a stealthy appearance.
  • Stainless steel T-bolt clamps for maximum clamping force and durability.

Holley iNTECH Cold Air Intake for Camaro 223-02

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6350029): Dual-Mode Axle-Back Exhaust for ’16-’17 Camaro SS 6.2L with NPP Quad Tip

David Ayers Leave a comment
Use This Post Clip for Email

This new Elite Series axle-back exhaust system for the 2016–2017 Camaro SS with 6.2L V8 from Hurst gives you real sound options: either powerful, aggressive sound in Track mode or a mellow tone in Stealth mode. It’s specifically engineered to fit both coupe and convertible models with the factory NPP option (identified by quad tips) and features tandem Delta 40 and Outlaw mufflers and 4” polished stainless steel tips.

Made in America from 409S stainless steel, the Hurst 6350029 includes all necessary parts and installation hardware.

Note: Though the system itself clamps on, the OE system will require cutting to remove the factory mufflers.

Features

  • For 2016–2017 Chevy Camaro SS 6.2L V8 with NPP quad tips.
  • Dual-mode operation: Track and Stealth.
  • Functional exhaust valves work with OE actuator motors to select between sound levels.
  • Stainless steel construction.
  • Dyno tuned for maximum performance.
  • Made in the USA.

Hurst Dual-Mode Axle-Back Exhaust for Camaro 6350029

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: Hooker Blackheart Axle-Back Exhaust Kit

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the Blackheart Axle-Back Exhaust Kit from Hooker on a 2014 Chevy Camaro V6

Parts used in this video:

Blackheart Axle-Back Exhaust Kit (70401309-RHKR)

Want to check out more about Hooker?
http://partspro.com/manufacturer/hooker

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: LS Engine Swap-in-a-Box Kits

David Ayers Leave a comment
Use This Post Clip for Email

Though ultimately rewarding, putting a new-era GM LS V8 motor into a classic GM muscle car can be a complex undertaking. The key to a less-stressful swap lies in finding aftermarket parts that work well together, and Hedman Hedders’ LS Engine Swap-in-a-Box kits do just that!

Each Hedman kit comes with a special engine swap oil pan and pickup, a full set of engine swap mounts/pads, and a complete set of engine swap headers with gaskets/mounting hardware; plus, select kits also include a transmission crossmember and mount pad.

Features

  • Streamline your next LS engine swap.
  • For LS-based passenger cars.
  • Coordinated parts work well together.

Hedman Hedders LS Engine Swap in a Box Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Spectre Performance (900235): Air Intake Kit for ’67-’69 Camaro LS Swap

David Ayers Leave a comment
Use This Post Clip for Email

Dropping an LS engine into a 1967–1969 Chevy Camaro ranks among the most popular of today’s upgrades. To facilitate the swap, Spectre Performance offers an air intake system specially built for the classic muscle car’s engine bay and fender area that complements an LS engine and blade-style mass air flow sensor.

The 900235 puts the air filter on the passenger side of the engine compartment and includes a heat shield that attaches using existing mounting points. This air intake comes with a red Spectre Performance air filter.

Features

  • For 1967–1969 Chevrolet Camaro.
  • For use with a blade-style mass air flow sensor.
  • Polished aluminum finish.
  • Passenger side air filter position.
  • Red Spectre Performance air filter included.
  • Increases power and torque.

Spectre Performance Air Filter Kit for Camaro LS Swap 900235

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: MXP Cold Air Intake for ’12-’15 Supercharged Chevy Camaro ZL1

David Ayers Leave a comment
Use This Post Clip for Email

The MXP series cold air intake for 2012–2015 supercharged Chevrolet Camaro ZL1 with 6.2 liter engine from AIRAID features a large, one-piece, roto-molded air box that uses the OEM scoop, a massive 4.25” induction tube with billet aluminum MAF housing, premium AIRAID SynthaMax non-oiled air filter, and complete high-grade hardware. This product requires the use of aftermarket tuning due its low-restriction design, which funnels more oxygen-rich air into the engine.

Three color options are available: 251-308 (red filter), 252-308 (black filter), and 253-308 (blue filter).

Features

  • 25” induction tube with billet aluminum MAF housing.
  • Aftermarket tuning required.
  • Replaces stock intake tubing, air filter, and air box.
  • Three air filter colors: red, black, and blue.
  • Backed by AIRAID’s lifetime “no-hassle” warranty!

AIRAID MXP Cold Air Intake for Supercharged Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Silicone Radiator Hose Kit for 2016+ Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

Shipping this month, this silicone radiator hose kit for 2016-and-up Chevy Camaro SS Coupe from Mishimoto is made from high-grade silicone and heat-resistant embedded fibers to endure temperatures reaching 330 degrees Fahrenheit.

The kit (PN MMHOSE-CAM8-16) includes both upper and lower radiator hoses (and worm-gear clamps) and achieves many benefits for your cooling system, including efficiently reducing heat while simultaneously increasing pressure tolerance. This product is available in Black, Blue, or Red and is backed by Mishimoto’s lifetime warranty.

Features

  • Direct fit for the 2016 Chevrolet Camaro SS coupe.
  • Includes both upper and lower radiator hoses.
  • Max temperature of 330° F.
  • Made of high-grade silicone and heat-resistant embedded fibers.
  • Efficiently reduces heat and increases pressure tolerance.
  • Includes high-quality worm-gear clamps for easy installation.
  • Available in black, blue, or red.
  • Mishimoto Lifetime Warranty.

Mishimoto: Silicone Radiator Hose Kit for 2016+ Camaro SS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

KW Suspensions (35261817): Clubsport Kit for 2010+ Camaro

David Ayers Leave a comment
Use This Post Clip for Email

The Clubsport Kit with coilovers for 2010-and-up Chevrolet Camaro from KW Suspensions is designed for Nordschleife builds using track day tires. Using optional adjustable top mounts, 35261817  allows you to adjust suspension geometry to specific tire requirements and the intended use.

Independently adjustable rebound and compression dampening technology enables individual set-up adjustments according to vehicle load, tire characteristics, and varying track conditions. KW Suspensions engineered this Clubsport Kit to meet all your needs for road and track—enhancing handling, agility, and lap times.

Features

  • For 2010+ Chevy Camaro.
  • Adjustable top mounts.
  • Independently adjustable rebound and compression dampening.

KW Suspensions (35261817): Clubsport Kit for 2010+ Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (SA312): Cartech’s “Camaro 5th Gen 2010-2015: How to Build and Modify” Book

David Ayers Leave a comment
Use This Post Clip for Email

As capable as the new Camaros are, true enthusiasts always want more. That’s where Camaro 5th Gen 2010-2015: How to Build and Modify from Cartech comes in. Written by LS engine expert Scott Parker, SA312 leads readers through the modification of their 5th Gen Camaros, covering an exhaustive list of topics including brake upgrades, suspension, rear axles, intake and exhaust, cooling, fuel system, transmission, LS engine mods, superchargers/turbochargers, ECM tuning, aftermarket EFIs, and more. Crack open Camaro 5th Gen 2010-2015: How to Build and Modify and stay ahead of the muscle car arms race.

Features

  • Pages: 192
  • Size: 8.5” x 11”
  • Format: paperback
  • Illustrations: color

SA Design (SA312): Cartech’s “Camaro 5th Gen 2010-2015: How to Build and Modify” Book

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.