Most modern electronic ignition systems require suppression-style
wires to preserve sensitive components. Not so with the Flame-Thrower 8-mm custom-fit
MAGx2 wires from PerTronix.
You’ll get enhanced RFI suppression and dual current paths for more power
delivered to the spark plug. These custom wire sets have factory-terminated
ends for a superior connection and a perfect fit—with no cutting, crimping, or
splicing required. Most parts available in Black, Blue, and Red.
Features
Two current paths for reliability and redundancy:
Primary path: carbon-impregnated fiberglass
center core
8 mm silicone jacket resists high temperatures,
moisture, oil, and chemicals.
EPDM (ethylene propylene diene methylene) inner
insulation for superior heat resistance and prevention of arcing and voltage
leaks
Fiberglass reinforcing braid for added strength
and flexibility
Available colors: Black, Blue, and Red
Warranty: lifetime
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Most modern electronic ignition systems require suppression-style
wires to preserve sensitive components. Not so with the Flame-Thrower 8-mm custom-fit
MAGx2 wires from PerTronix.
You’ll get enhanced RFI suppression and dual current paths for more...
Operating without misfires beyond 7,500 rpm and featuring a
digital rev limiter, the D1075 Flame-Thrower Race HEI III distributor from PerTronix produces
67% more energy with a 45% faster spark breakdown time (compared to stock).
These distributors are built from the ground up with all-new components,
including a centerless-ground, corrosion-resistant shaft that reduces friction
and provides concentric operation. IMCA approved.
Features
For small- and big-block Chevy applications
Operates without misfires beyond 7,500 rpm (nearly
3,000 rpm higher than most stock HEIs).
67% more energy with a 45% faster spark
breakdown time
Digital rev limiter with advanced microprocessor
dwell control (7.2-amp dwell current)
Lightweight aluminum alloy housing with
aligned/honed bronze-sintered bushings
Centerless-ground, corrosion-resistant shaft
reduces friction and provides concentric operation.
High–dielectric strength cap with brass
terminals and low-resistance center coil brush
Balanced rotors with nylon screws prevent arcing
and reduce vibration at high rpm
Adjustable vacuum-advance canister and high
performance advance curve
Precision-machined chromoly advance weights and
center plate eliminate erratic timing.
Warranty: 1-year limited
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
PerTronix (D1075): Flame-Thrower “IMCA-Approved” Race HEI III Distributor for Chevy SBC/BBC
PerTronix (D1075): Flame-Thrower “IMCA-Approved” Race HEI III Distributor for Chevy SBC/BBC
Operating without misfires beyond 7,500 rpm and featuring a
digital rev limiter, the D1075 Flame-Thrower Race HEI III distributor from PerTronix produces
67% more energy with a 45% faster spark breakdown time (compared to stock).
These distributors ...
The PerTronix Bundle003
ignition kit is designed to provide maximum ignition performance at an
enthusiast-friendly price point. Kit includes a Chevy SB/BB billet
plug-and-play Ignitor 3 (I3) distributor with black female cap, Flame-Thrower
III chrome coil, and Flame-Thrower MAGx2 universal black spark plug wires with
90-degree plug boot ends.
PerTronix’s I3
billet distributors ship with all-new Ignitor III multi-spark rev-limiting modules,
which replace outdated points, electronic distributors, and bulky HEIs. Just
install the distributor, connect two wires, and turn the crank! The I3 provides
multiple sparks throughout the RPM range, with LED feedback, memory safe
function, adaptive dwell for peak energy maintenance and reduced misfires,
auto-adjusting spark timing at high RPMs, and reverse polarity and over-current
protection.
Coming in at 45,000 volts, PerTronix
Flame-Thrower III coils boast an extra-low resistance, with a high-turns ratio
and ultra-low primary resistance; together, these properties let the ignition
system charge faster at high RPMs. Drivers will also enjoy a rapid charge time
and full 50-state and Canadian legality (CARB E.O. #D-57-21).
Finally, PerTronix Flame-Thrower
MAGx2 wires feature factory-terminated ends for a superior connection and a perfect
fit—no cutting, crimping, or splicing required—two current paths for redundancy-enhanced
reliability; a temperature-, moisture-, oil-, and chemical-resistant 8mm silicone
jacket; and reinforced fiberglass braid.
Ignitor 3 Distributor
Features
Plug-and-play billet distributors designed for
maximum ignition performance at an affordable price.
Ignitor III multi-spark rev-limiting modules.
Precision CNC-machined 6061-T6 billet aluminum
housings are light yet strong.
Hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion
displacement for accurate timing and extended operational life.
Adjustable mechanical advance with proprietary
limiting function permits multiple settings.
Factory set with a performance advance curve, with
additional springs for custom advance.
Flame-Thrower III
Coil Features
45,000 volts.
Ultra-low 0.32 primary resistance.
Compatible with Ignitor II and III systems as
well as most capacitive discharge systems.
Charges to peak current 30–70% faster than other
coils.
Rapid charge time means maximum spark energy is
sustained to higher engine RPM.
Flame-Thrower MAGx2
Wire Features
90-degree plug boot ends.
Two current paths for reliability and redundancy:
primary spiral-wound stainless steel alloy and secondary carbon-impregnated
fiberglass center core.
Low 500 ohm-per-foot resistance.
8mm silicone jacket resists high temperatures,
moisture, oil, and chemicals.
EPDM (ethylene propylene diene methylene) inner
insulation for superior heat resistance and prevention of arcing and voltage
leaks.
Fiberglass-reinforced braid for added strength
and flexibility.
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
PerTronix (Bundle003): Plug-and-Play Ignition Kit with Ignitor 3 Distributor for Chevy SB/BB
PerTronix (Bundle003): Plug-and-Play Ignition Kit with Ignitor 3 Distributor for Chevy SB/BB
The PerTronix Bundle003
ignition kit is designed to provide maximum ignition performance at an
enthusiast-friendly price point. Kit includes a Chevy SB/BB billet
plug-and-play Ignitor 3 (I3) distributor with black female cap, Flame-Thrower
III chrom...
Featuring PerTronix’s exclusive and patented Ignitor II or Ignitor III electronics, CNC-polished Flame-Thrower billet distributors offer maximum ignition performance and easy installation thanks to plug-and-play connectivity. And because of their small size, these distributors are an excellent choice for tight engine compartments. Factory set with a performance advance curve, with additional springs provided for custom curves.
Features
Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
Constantly adjusts dwell angle to maintain peak energy throughout the RPM range.
Synchronized peak current and real-time spark timing adjustments.
Tempered distribution shaft and precision-stamped advance weights.
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Featuring PerTronix’s exclusive and patented Ignitor II or Ignitor III electronics, CNC-polished Flame-Thrower billet distributors offer maximum ignition performance and easy installation thanks to plug-and-play connectivity. And because of their s...
Share This Post!