Tag: gm

PROFORM (141-830): Slant-Edge Air Cleaner for Chevrolet

David Ayers Leave a comment
Use This Post Clip for Email

With its head-turning raised emblem, this patent-pending Slant-Edge Air Cleaner for Chevrolet from PROFORM is the final component you need to finish your dress-up look. The 141-830 comes with a genuine 3” GM air filter element for maximum airflow plus all necessary mounting hardware.

Installation is easy: the air cleaner lid attaches to a short stud that is screwed into the center of the carburetor. The lid has a threaded boss underneath, and simply spins into place.

PROFORM technical note: After installation, lower the hood slowly to ensure a minimum of 3.75” exists from the top of the carburetor gasket to the underside of your hood.

  • Good-looking raised emblem.
  • Includes 3” GM air filter element and mounting hardware.
  • Easy to install.
PROFORM: (141-830): Slant-Edge Air Cleaner for Chevrolet
PROFORM: (141-830): Slant-Edge Air Cleaner for Chevrolet

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – Powermaster

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Powermaster’s very own J.R. Richmond goes over their newest starters for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (60650): LS Gauge Controller

David Ayers Leave a comment
Use This Post Clip for Email

If you’re running a modern LSx drivetrain in an older vehicle, you’ve probably wondered how you’re going to integrate all of your aftermarket gauges. Until now, your only option was to purchase individual sensors and install them just to run the gauges—even though your modern LSx drivetrain already has the necessary sensors integrated into its computer control system. If running redundant sensors seems a bit, well, redundant, the LS Gauge Controller from Painless Performance is just the product you need.

This module uses the information that is already available through your OBD-II port, eliminating the need to run duplicate sensors for your various gauge functions. You’ll be able to use most aftermarket speedometer, tachometer, coolant temperature, oil pressure*, and fuel level* gauges thanks to an advanced data-conversion process. The 60650 LS Gauge Controller is compatible with all GM gas engine drivetrains from 1996. Not currently compatible with GMPP engine harness kits.

  • Eliminates the need for redundant gauge sensors.
  • Uses Control Area Network (CAN) system to convert raw data into a user-programmable signal.
  • Compatible with 1996-and-up GM gas engine drivetrains.
  • Supports all speedometer, tachometer, and coolant temp gauges.
  • Select applications will support oil pressure and fuel level gauges.
  • Made in the USA.

*Not available for all applications.

 

Painless Performance (60650): LS Gauge Controller
Painless Performance (60650): LS Gauge Controller

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker Headers: Blackheart SS Long-Tube Headers for 68-72 GM A-Body

David Ayers Leave a comment
Use This Post Clip for Email

Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for decades. Hooker continues to push the boundaries of performance with the new Blackheart line of performance exhaust systems for popular late-model vehicles. The Blackheart line is truly a platform-designed full exhaust program. From the cylinder head flange to the tailpipe, the Blackheart line is engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality!

  • 304SS construction provides long-term corrosion resistance.
  • Includes 3” merge-style collectors and velocity spears.
  • Compatible with factory A/C evaporator case and stock GM LS engine spark plug wires.
  • Bolt-in compatible with both sets of Hooker 1968-72 A-body specific engine brackets.
  • Does not require relocation of brake system proportioning valve.
  • Compatible with all GM automatic and Tremec T56/T56 Magnum transmissions.
  • O2 bung locations optimized for wide-band O2 sensor operation/reliability.
  • All necessary hardware included for easy installation.
Hooker Headers: Blackheart SS Long-Tube Headers for 68-72 GM A-Body
Hooker Headers: Blackheart SS Long-Tube Headers for 68-72 GM A-Body

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (10102): 21-Circuit Classic Customizable Chassis Harness – Non-GM-Keyed Column

David Ayers Leave a comment
Use This Post Clip for Email

This 21-circuit kit is Painless Performance’s most popular customizable chassis harness. You’ll find that it’s easily adaptable to almost any vehicle.

Included with this harness are a GM-engineered fuse block, Painless mounting bracket, GM turn signal connectors, and prewired headlight plugs and dimmer switch. Each wire is printed with circuit identification and uses GM color codes for easy installation.

Painless 10102
Painless 10102

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M® (77104): StarTek Starter for GM Small Block/Big Block (153T & 168T Ring Gear, Straight Mount)

David Ayers Leave a comment
Use This Post Clip for Email

The new B&M StarTek Starter is designed to provide high torque and power in a wide range of demanding applications. With 4.5:1 reduction gears coupled to a high-power 300-amp motor, hard starting becomes a thing of the past. The StarTek uses an ultra-high-strength pinion gear, billet aluminum mounting flange, sealed ball bearings, and a dual winding solenoid to ensure maximum reliability. For special applications, the StarTek can be clocked in three different positions to ensure you have the most clearance possible between your starter and other engine components.

  • Three-position indexing for optimum positioning in tight-clearance applications
  • 4.5:1 gear reduction ratio for maximum torque
  • Billet aluminum mounting flange
  • Designed for higher-compression and blown engines
  • Dual-winding solenoid for lower-engagement current draw
  • High-performance 300-amp motor
  • Ultra-high-strength pinion gear

    B&M 77104
    B&M 77104

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hypertech (32501): Max Energy GM Power Programmer

David Ayers Leave a comment
Use This Post Clip for Email

Max Energy tuning extracts every bit of energy possible out of every molecule of fuel, giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower, and torque, our engineers first optimize the spark and fuel curves point-by-point over the entire rpm band. With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are maximum power and fuel mileage.

Hypertech_32501
Hypertech_32501

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock (79949): E-CNC 215 Cylinder Heads for Chevy LS1/LS2

David Ayers Leave a comment
Use This Post Clip for Email

Designed for 1997 and later GEN 3 and 4 LS1/LS2 Chevy engines, including 4.8L, 5.3L, 5.7L, and 6.0L. All E-CNC cylinder heads feature fully CNC-machined intake ports, combustion chambers, and exhaust ports for improved air-flow. Dyno tests proved these heads are capable of 457 hp and 438 ft-lb. of torque. High-quality conical beehive springs are secured with steel retainers and valve locks for performance up to .600″ valve lift. Match with any one of Edelbrock’s LS series intake manifolds and camshafts for a dyno-proven performance combination. E-CNC 215 head is 50-state street legal.

Features:

  • Combustion chamber volume: 65cc
  • Intake runner volume: 212cc
  • Exhaust runner volume: 76cc
  • Intake valve diameter: 2.02″
  • Exhaust valve diameter: 1.57″
  • Valve stem diameter: 8mm
  • Valve guides: manganese steel
  • Deck thickness: 5/8″
  • Valve spring diameter: 1.55″ / 1.30″
  • Valve spring maximum lift: .600″
  • Pushrod diameter: 5/16″
  • Valve angle: 15°
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x .750 reach, gasket seat

    Edelbrock_79949
    Edelbrock_79949

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor (92005): 9mm Firepower 180 Degree Race Fit LS 12″ Plug Wires

David Ayers Leave a comment
Use This Post Clip for Email

Taylor 92005 9mm Firepower Racing Ignition Set provides the ultimate in performance and racing ignition wires for the LS engine platform. They provide the lowest-resistance wire at only 25 Ohms per foot, which equals more horsepower, torque, and spark energy.

Features:

  • Ferrite spiral-wound, coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover
  • Exclusive 100% ZIMPLEX® silicone outer jacket
  • Heat and abrasion protection up to 600 degrees Fahrenheit and 102,000 volts dielectric strength

    Taylor_92005
    Taylor_92005

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SCT (7416): X4 Power Flash General Motors Programmer

David Ayers Leave a comment
Use This Post Clip for Email

The X4 Power Flash arrives preloaded with dyno-proven tunes that increase horsepower and torque! Programming your vehicle with one of SCT’s preloaded tune files is as easy as 1-2-3: Simply plug the OBDII connector into your vehicle’s OBDII port, select the file using the simple-to-navigate menu, and within minutes the X4 programs your vehicle.

With a huge backlit display, the SCT X4 Power Flash makes it easy to read built-in data logs or real-time monitored vehicle data, view popular sensor data (e.g., EGT, air/fuel ratio), or input from any other 0-5 volt source!

The X4 Power Flash device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. Restoring your vehicle is as easy as selecting Return to Stock from the device menu.

This product is not legal for sale or use in California on pollution-controlled motor vehicles.

SCT 7416
SCT 7416

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.