Painless (57003): Trail Rocker with Overhead Six-Switch Box for Jeep JK

The 57003 Trail Rocker for Wrangler JK from Painless is your weather-resistant solution for controlling up to eight accessories with six overhead LED switches. The kit mounts using existing mounting holes, with a bolt-on power center that provides 200 amps of fused protection. The plug-and-play design installs easily, and it includes sturdy TXL output wiring. Best of all, this Trail Rocker is winch-ready when used with Painless’s Winch Control Add-On kit (57150).

New as of October 1!

Features

  • Control up to 8 accessories.
  • Includes eight 30-amp fuses and eight 30-amp relays.
  • Weather-resistant housing protects power center and connections.
  • Custom, bolt-on, powder-coated mounting brackets.
Painless (57003): Trail Rocker with Overhead Six-Switch Box for Jeep JK
Painless (57003): Trail Rocker with Overhead Six-Switch Box for Jeep JK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro

With a continuous temperature rating of between -94° and 257° F and a melting point of 482° F, the PowerBraid from Painless Performance is engineered to enhance and protect the insulation of any electrical wire bundles or cables. In addition, it cleans up cluttered and unsightly engine bays. This kit is for use with any of the following second-generation Camaro harnesses: 20112, 20113, or 20114.

Made from tough-woven, flexible, and semi-rigid material, PowerBraid provides excellent drainage and maintains superior abrasion resistance. The split loom design has a minimum overlap of 25 percent, allowing for easy installation and optimal wiring protection. The 70923 kit includes multiple PowerBraids in various lengths and widths, plus heat shrinks, tie wraps, and rolls of electrical and stretch/seal tape.

  • Flexible, tough, semi-rigid protection for electrical wire bundles/cables.
  • Continuous temperature rating of -94° to 257° F.
  • Melting point: 482° F.
  • Split loom design with 25% overlap.
  • Includes various PowerBraids, heat shrinks, tie wraps, and tape.
  • Keeps engine compartment looking sharp.
Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro
Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (70920): PowerBraid Chassis Harness Kit

With a continuous temperature rating of between -94° and 257° F and a melting point of 482° F, the PowerBraid from Painless Performance is engineered to enhance and protect the insulation of any electrical wire bundles or cables. In addition, it cleans up cluttered and unsightly engine bays.

Made from tough-woven, flexible, and semi-rigid material, PowerBraid provides excellent drainage and maintains superior abrasion resistance. The split loom design has a minimum overlap of 25 percent, allowing for easy installation and optimal wiring protection. The 70920 kit includes multiple PowerBraids in various lengths and widths, plus heat shrinks, tie wraps, and rolls of electrical and stretch/seal tape.

  • Flexible, tough, semi-rigid protection for electrical wire bundles/cables.
  • Continuous temperature rating of -94° to 257° F.
  • Melting point: 482° F.
  • Split loom design with 25% overlap.
  • Includes various PowerBraids, heat shrinks, tie wraps, and tape.
  • Keeps engine compartment looking sharp.
Painless Performance (70920): PowerBraid Chassis Harness Kit
Painless Performance (70920): PowerBraid Chassis Harness Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (60650): LS Gauge Controller

If you’re running a modern LSx drivetrain in an older vehicle, you’ve probably wondered how you’re going to integrate all of your aftermarket gauges. Until now, your only option was to purchase individual sensors and install them just to run the gauges—even though your modern LSx drivetrain already has the necessary sensors integrated into its computer control system. If running redundant sensors seems a bit, well, redundant, the LS Gauge Controller from Painless Performance is just the product you need.

This module uses the information that is already available through your OBD-II port, eliminating the need to run duplicate sensors for your various gauge functions. You’ll be able to use most aftermarket speedometer, tachometer, coolant temperature, oil pressure*, and fuel level* gauges thanks to an advanced data-conversion process. The 60650 LS Gauge Controller is compatible with all GM gas engine drivetrains from 1996. Not currently compatible with GMPP engine harness kits.

  • Eliminates the need for redundant gauge sensors.
  • Uses Control Area Network (CAN) system to convert raw data into a user-programmable signal.
  • Compatible with 1996-and-up GM gas engine drivetrains.
  • Supports all speedometer, tachometer, and coolant temp gauges.
  • Select applications will support oil pressure and fuel level gauges.
  • Made in the USA.

*Not available for all applications.

 

Painless Performance (60650): LS Gauge Controller
Painless Performance (60650): LS Gauge Controller

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Talking Performance with Painless

By John M. Arnaud

When the candy apple red Camaro pulled into our parking lot last week, we knew Painless Performance had arrived. Company President Adrian Murray and National Sales Manager Derek Love came into town to talk shop, marketing, and the promotion of their exciting new Trail Rocker product line.

This year Painless celebrated its 25th anniversary in the aftermarket industry. The company boasts the number-one-selling chassis harness in addition to a variety of fuel injection management systems and other electrical components. Long known for excellence in the classic car and truck sectors, the company is moving into new territory with the Trail Rocker for Jeep, an in-dash power center that allows off-road adventurers to control up to eight accessories from the safety of a waterproof housing.

Painless Performance Visits Parts Pro
Painless Performance Visits Parts Pro

This week of all weeks, Parts Pro is grateful to count Painless Performance as a valued partner. Thanks for coming down to see us…and here’s to an exciting 2016!

To plug into the latest products from Painless Performance, visit your local Parts Pro retailer. You can find an affiliated store using our dealer locator.

If you are a performance accessories retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Tags: painless performance, trail rocker, chassis harness, efi, off-road, fuel injection, classic car, classic truck

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (10102): 21-Circuit Classic Customizable Chassis Harness – Non-GM-Keyed Column

This 21-circuit kit is Painless Performance’s most popular customizable chassis harness. You’ll find that it’s easily adaptable to almost any vehicle.

Included with this harness are a GM-engineered fuse block, Painless mounting bracket, GM turn signal connectors, and prewired headlight plugs and dimmer switch. Each wire is printed with circuit identification and uses GM color codes for easy installation.

Painless 10102
Painless 10102

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 Parts Pro Vendor Showcase presents: Painless Performance

Welcome to the 2015 Parts Pro Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products. In this episode, Painless Performance’s very own Derek Love goes over their new Trail Rocker Control System for the Jeep Wrangler. Be on the look out for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro Performance Center to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.