Tag: wrangler

Hypertech (730129): In-Line Speedometer Calibrator Module for 2021 GM Trucks

David Ayers Leave a comment
Use This Post Clip for Email

Compatible with many 2021 year trucks, eight new speedometer calibration products have just rolled out from Hypertech. The 730129 in-line module, designed for 2021 GM 1500/2500/3500 and Colorado/Canyon, corrects speedometer readings with larger tires installed (up to 54”). This fully plug-and-play product easily connects above the driver’s kick panel in less than 5 minutes, and the module can be tucked out of the way while remaining accessible for recalibration down the road.

Other Hypertech modules are available for the following 2021 trucks: Ford F-150/-250/-350 (PN 730125), Ford Ranger (PN 3300), Toyota Tacoma (PN 730123), Toyota Tundra (PN 730119), Nissan Titan (PN 730126), Ram 1500/2500/3500 (PN 730133), and Jeep Wrangler/Gladiator (PN 3400).

Features

  • For 2021 GM 1500/2500/3500 and Colorado/Canyon
  • Corrects speedometer readings with up to 54” tires installed
  • Plug-and-play installation above driver’s kick panel
  • Installs in less than 5 minutes
  • Remains accessible for later recalibration
  • Other modules available for Ford, Toyota, Nissan, Ram, and Jeep

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Energy Suspension (2.4114R): Body Mount Set for ’18–’20 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

When it comes to your vehicle’s body mounts, it’s hard to find a good middle ground. Original rubber mounts can crack, distort, and crush until they literally fall off. Aluminum mounts can be too harsh for street use and can break/cause other components to break as well. Energy Suspension solved this issue with its Hyper-Flex™ polyurethane cab and body mounts, which are soft enough for a smooth ride yet rugged enough for demanding roads, trails, and tracks. These body mounts help to maintain your vehicle’s body alignment.

The 2.4114R Energy Suspension set fits 2018–2020 Jeep Wrangler JL.

Features

  • For 2018–2020 Jeep Wrangler JL
  • Hyper-Flex™ polyurethane is soft, flexible, and rugged
  • Replaces distorted and worn-out original mounts
  • Helps maintain car body and truck cab-to-bed alignment
Energy Suspension Body Mount Set for Jeep JL 2.4114R

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: Trail Performance Shocks for Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

Belltech has added to its Trail Performance line to include premium ride-quality shocks for 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL. Tuning and low-speed compression characteristics were a top priority here, leading to advanced control of pitch and roll, dive and squat to keep trail blazers confident and in control.

Belltech included two-way, independent adjustable technology in the form of 18 clicks of rebound tuning and 12 clicks of compression damping, letting drivers alter the Trail Performance shocks to perform at the highest expectancy on any terrain. The setup especially complements large, aggressive, off-road tires, maintaining a smooth, stable, in-control ride.

Available rear and front for 0”–2.5” and 4” lifts for JK and JL.

Features

  • For 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL
  • Premium ride quality
  • Advanced control of pitch and roll, dive and squat
  • Two-way, independent adjustable technology
  • +/- 18 clicks rebound adjustment
  • +/- 12 clicks compression adjustment
  • Perfect for large, aggressive, off-road tires
Belltech Performance Trail Shocks for Jeep Wrangler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hypertech (752504): Speedometer Calibrator for 2019 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

Hypertech’s Speedometer Calibrator for 2019 Jeep Wrangler JL corrects the speedometer for larger-than-stock tires (24–40”). This product is a great value for drivers who desire only recalibration functions without more advanced tuning features.

Simply plug the device into your Jeep’s under-dash connector and select the new tire height. In a matter of minutes, your JL’s computer will be reprogrammed for accurate readings. Also reads, displays, and clears diagnostic trouble codes (DTCs).

Note: Not legal for sale or use in California.

  • For 2019 Jeep Wrangler JL.
  • Calibrate your speedometer for nonstock tires.
  • Read and clear diagnostic trouble codes (DTCs).
  • Not legal for use or sale in California.
Hypertech Speedometer Calibrator for 2019 Jeep Wrangler JL 752504

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Energy Suspension: Rock-Flex Suspension Systems for 2018 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

Though the Wrangler JL offers many advances over the JK, including a well-designed suspension featuring better geometry, the engineers at Energy Suspension believe strongly in that old saying: “There’s always room for improvement.”

The new Rock-Flex suspension system from Energy Suspension captures that adventurous spirit. Using Hyperflex performance polyurethane, Rock-Flex systems create a ride height–adjustable suspension that gives your JL the articulation, control, and off-road performance of a much more expensive off-road suspension while simultaneously enhancing on-road handling. Rock-Flex is less a replacement suspension and more a series of parts that augment the factory suspension (and overcomes the shortcomings of OE rubber components).

This innovative product addresses all the issues associated with lifting a coil sprung Jeep, correcting sway bar geometry and caster without additional modification—allowing the suspension to function properly through its entire range of motion while improving the JL’s already impressive street manners.

If you’ll be at SEMA, stop by the Energy Suspension booth (#23267) to learn more about this exciting new product.

Features

  • For 2018 Jeep Wrangler JL.
  • Creates a ride height–adjustable suspension.
  • Increased articulation, control, and off- and on-road performance.
  • Corrects sway bar geometry and caster without additional modification.
  • Visit the Energy Suspension booth (#23265) at SEMA to learn more!

Energy Suspension Rock-Flex Suspension System for Jeep Wrangler JL

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite: Extruded Core Radiator for ’07-’18 Jeep Wrangler JK

David Ayers Leave a comment
Use This Post Clip for Email

Extruded Core Technology from Flex-A-Lite is the future of performance aluminum radiators, replacing multi-core radiators with a new, advanced design. Extruded Core Radiators provide significantly better cooling with a stronger, more durable, and lighter design.

This direct-fit radiator is engineered to bolt into a 2007–2018 Jeep Wrangler JK—no cutting or drilling required. The radiator mounts using the factory location and equipment and includes a 22–24 lb. cap and train petcock.

Features

  • Increased contact area between coolant and aluminum tubes for better heat rejection.
  • Flat surface on which to braze the cooling fins maximizes contact between the tubes and fins for better cooling.
  • Louver patterns in the cooling fins direct airflow for better performance.
  • Wind-tunnel testing has shown significant cooling efficiency over standard tube radiators.
  • Enhanced strength (100 PSI burst rating).
  • Corner subhead reinforces the cooling tube to header connection (an area prone to cracking and leaking in aluminum radiators).
  • Warranty: 2-year transferable.

Flex-A-Lite Extruded Core Radiator for Jeep JK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M Nodular Iron Differential Cover for Dana 30

B&M (12310): Hi-Tek Nodular Iron Dana 30 Differential Cover

David Ayers Leave a comment
Use This Post Clip for Email

B&M’s super-tough nodular iron differential cover is perfect for Jeep Wranglers, Cherokees, and other applications with Dana 30 differentials. With its durable black powdercoat, clear gloss finish, machined B&M logo, and reinforced ribs, this 12310 Hi-Tek Series cover is as durable as it is good looking. Other features include a magnetic drain plug and fill port with an O-ring magnetic dipstick with checkered, easy-grip texture. Includes all hardware, instructions, and a limited lifetime warranty.

Features

  • For most Jeep Wranglers with Dana 30 front differential.
  • Nodular iron construction.
  • Fill and drain plugs for easy servicing.
  • Magnetic dipstick for on-the-fly fluid checks.
  • Made in the USA.
  • Warranty: limited lifetime.

B&M Nodular Iron Differential Cover for Dana 30

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Baffled Oil Catch Can Kit for ’07-’11 Jeep Wrangler JK

David Ayers Leave a comment
Use This Post Clip for Email

The baffled oil catch can kit from Mishimoto for 2007–2001 Jeep Wrangler JK (MMBCC-WR6-07PBE) reduces the amount of harmful blow-by oil that coats your intake tracts and cakes your valves with carbon deposits. Specially designed internal air diverters slow incoming air for more effective air/oil separation, while a 50-micron bronze filter combs the air and an internal aluminum baffle prevents any caught content from being recirculated back into the system.

The one-piece, 2.5mm-thick steel bracket was engineered to withstand off-road stresses, and mounts securely to the chassis in an optimal position that avoids the bulk of chassis movement. Installing this direct-fit kit takes about only an hour from beginning to end. Product backed by Mishimoto’s lifetime warranty.

Kit Contents

  • 1 application-specific mounting bracket.
  • 1 black-anodized 6061 aluminum catch can.
  • 2 silicone hoses.
  • 2 plastic barbed fittings.
  • 4 worm gear clamps.
  • 1 bronze filter.
  • 1 air diverter.
  • 1 internal baffle and rod.
  • 1-3/8” NPT plug.
  • 1 large O-ring.
  • Mounting hardware.

Features

  • Internal air diverter increases air turbulence to improve oil separation.
  • Helps maintain proper octane levels to reduce potential detonation.
  • Fully serviceable filters and cans.
  • High-quality O-ring ensures a tight seal.
  • Thick 2.5mm bracket won’t bend, rattle, or break under heavy abuse.
  • Direct-fit bracket mounts can in serviceable location.
  • Warranty: lifetime.

Mishimoto Baffled Oil Catch Can Kit for JK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless (57003): Trail Rocker with Overhead Six-Switch Box for Jeep JK

David Ayers Leave a comment
Use This Post Clip for Email

The 57003 Trail Rocker for Wrangler JK from Painless is your weather-resistant solution for controlling up to eight accessories with six overhead LED switches. The kit mounts using existing mounting holes, with a bolt-on power center that provides 200 amps of fused protection. The plug-and-play design installs easily, and it includes sturdy TXL output wiring. Best of all, this Trail Rocker is winch-ready when used with Painless’s Winch Control Add-On kit (57150).

New as of October 1!

Features

  • Control up to 8 accessories.
  • Includes eight 30-amp fuses and eight 30-amp relays.
  • Weather-resistant housing protects power center and connections.
  • Custom, bolt-on, powder-coated mounting brackets.

Painless (57003): Trail Rocker with Overhead Six-Switch Box for Jeep JK
Painless (57003): Trail Rocker with Overhead Six-Switch Box for Jeep JK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.