Superchips: Power Up and Win Promotion

Purchase qualifying Superchips products between March 1 and October 15, 2017, and be eligible to receive one or more entries to win exciting prizes. Click image for complete details!

 

Superchips Power Up and Win Promotion

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Big Carb Deal Promo

Via mail-in rebate. Get one of three Signature series air cleaners FREE with the purchase of a new Performer or Thunder Series carburetor. Offer valid from March 1 to April 30, 2017. Click image for printable form and complete details!

 

Edelbrock Big Carb Deal

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

KW Suspensions: Take up to $200 Off Select Purchases

KW Suspensions is offering a mail-in rebate on several products, starting at $75 off the H.A.S. kit to $200 off Clubsport coilovers, plus several rebate tiers in between! Qualifying purchases must be made from March 1 to April 30, 2017, in the US or Canada. Click image for printable form and complete details!

KW Suspensions Up to $200 Off

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RaceQuip: FIA Camlocks

If you’ve been among the many racers asking RaceQuip for more of its discontinued FIA harness systems, you’re in luck! Two years after RaceQuip stopped making its FIA camlocks, the company has issued a limited run of four part numbers, all 6-point designs: 751001 (pull-down lap Black), 754004 (pull-up lap HNR Black), 754014 (pull-up lap HNR Red), and 755005 (Euro sub 2” PD lap Black).

These harnesses all carry the current FIA 8853/98 rating with fresh 2022 FIA dates. In addition, the 751 and 754 belts are dual certified with SFI punch tags, meaning racers in certain sanctions will be able to use them for at least the next five years.

Now in stock—get them while you can!

Features

  • Limited run now in stock!
  • FAI 8853/98 rated, with 2022 FIA dates.
  • 751 and 754 also SFI certified.

RaceQuip FIA Camlocks

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (999SP): Lowering Kit for ’15-’16 Chevrolet Colorado/Canyon Ext/Crew Cab Short Bed 2WD

Designed to lower your truck +1” to -3” in the front and 4” in the rear, this all-new lowering kit with street-performance shocks from Belltech is just what you need to give your 2015–2016 Chevy Colorado or Canyon a low, aggressive stance. With all components required to properly lower your vehicle (including flip kit), this Stage 3 kit fits 2WD Extended/Crew Cab short bed Canyon/Colorado of the specified years.

Features

  • Fits 2015–2016 Chevrolet Colorado/Canyon (Ext/Crew Cab short bed 2WD).
  • Stage 3 complete solution.
  • +1” to -3” F / 4” R.
  • Street-performance shocks.

Belltech Lowering Kit for Colorado and Canyon

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Earl’s Performance Plumbing: New Electric Fuel Pumps and Regulators

Earl’s Performance Plumbing has expanded its line of electric fuel pumps and fuel pressure regulators, all using the same Holley components, design, and manufacturing processes you’ve come to trust. These new products are available in low- or high-pressure versions designed for use with a carburetor and gasoline.

Three new part numbers are available: 12803ERL (Fuel Pressure Regulator—Carburetor Style), 128011ERL (Low-Pressure 97 GPH Electric Fuel Pump), and 128151ERL (High-Pressure 140 GPH Electric Fuel Pump). The low-pressure pump does not require a fuel pressure regulator in most applications (unlike the high-pressure pump).

Features

  • Die-cast construction, with 3/8” NPT Inlet and Outlet ports.
  • Low-amperage pumps: only 4 amps.
  • Quality and reliable Holley components and engineering.
  • Pair with Earl’s vapor guard hose and ends (sold separately) to eliminate fuel-permeation issues.

Earl's Fuel Pumps and Regulators 12803ERL

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FiTech (30001): Go EFI 4 Self-Tuning Fuel Injection System

Suitable for engines from 250 to 600 horsepower, the 30001 Go EFI 4 self-tuning fuel injection system from FiTech is perfect for a variety of vehicles, from bracket racers and weekend street machines to everyday drivers.

The Go EFI 4 fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. For example, it boasts wet flow annual discharge; timing control; and the fastest, most accurate self-learning on the market. In addition, FiTech mounted the ECU on the throttle body to greatly facilitate installation: no unsightly harness draped across your engine or hole in your firewall. Plus, it’s the only computer-mounted throttle body that offers spark control without the need for a special distributor or external spark box. Finally, the touch-screen handheld controller ensures a quick and easy setup*.

Timing Notes: Will work with CDI box (but not required to control timing). Use of ignition timing control is optional and not required. Ignition timing control does not learn; requires synchronizing distributor to engine with a timing light.

*Self-tuning technology: after startup, the ECU takes over to produce an optimal tune!

Features

  • 4 Hi-Flow 600 HP injectors.
  • Simple touch screen selections get you up and running in minutes.
  • Basic install can be done with just 4 wires and 2 sensors.
  • Uses a Bosch 4.2 wideband O2 sensor (all other sensors are easily replaceable GM-style parts).
  • The ECU is mounted on the throttle body.
  • Throttle bodies have a completely universal base to fit any 4-bbl manifold.
  • Throttle linkage suits most transmissions.
  • Choice of three fuel inlet connections.
  • Voltage control fuel pump control reduces the voltage to the pump under low load conditions.
  • Wet flow technology and Swirl Spray annular discharge ensure complete atomization.
  • Ignition timing and air/fuel ratio can be adjusted on the fly from your touch screen controller.
  • 1 adjustable fan control switch.
  • Built-in fuel pressure regulator (no extra regulator to mount on your firewall).

FiTech Go EFI 4 30001

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Parts Pro™ Vendor Showcase presents: Taylor Cable

Welcome to the 2016 Parts Pro™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Justin Askren goes over several of the new products for Taylor.

Want to know more about Taylor? Click here:
https://partspro.com/manufacturer/taylor-cable-products

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ACCEL (61212): SuperBox Capacitive-Discharge Ignition System

ACCEL’s SuperBox capacitive-discharge ignition (CDI) system is the perfect choice for performance fans on a budget. When the engine is running at low RPM, this modern upgrade fires a series of sparks that lasts for 20 degrees of crankshaft rotation—ensuring better air/fuel combustion and creating instant throttle response and a smoother idle. The ACCEL 61212 SuperBox CDI features a durable cast-aluminum housing; can be set for four-, six-, or eight-cylinder applications; and easily connects to points, amplifiers, and magnetic-pickup distributors. An adjustable rev-limiter protects the engine in the event of driveline failure or the occasional missed shift, and adjusts in 100-RPM increments via rotary dial.

Features

  • Multiple sparks for improved starting, idle, and throttle response.
  • Full power output at high RPM.
  • Easily connects to points, amplifiers, and magnetic-pickup distributors.
  • Adjustable rev-limiter for over-rev protection.
  • Compatible with 4-, 6-, and 8-cylinder applications.
  • Available plug-and-play accessory harness (for most applications).

ACCEL SuperBox CD Ignition System

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N Orion Universal Air Intake System 54-5000

K&N (54-5000): Orion Universal Air Intake System

The universal Orion air intake system from K&N is engineered to increase volumetric efficiency and engine horsepower. The Orion uses K&N’s famous removable cotton gauze air filter and offers the benefits of an open-cone filter and standard air box in one unit. In addition, the plastic injection-molded housing acts as a heat shield to prevent power loss. Assembly designs were flow tested for many hours to achieve Orion’s final shape.

K&N 54-5000 includes a template to cut your own vinyl wrap to customize the housing, a 76mm air filter base flange, and a 100mm housing intake. The filter base has a 1/4” NPT threaded fitting to accommodate an optional vent adapter.

Available separately: mounting hardware, vent adapters, and cold air hose.

Features

  • High filtered air flow increases HP and acceleration.
  • Injection-molded filter housing.
  • Washable and reusable lifetime air filter with molded velocity stack.
  • Flow-tested assembly for optimized air flow and reduced pressure loss.
  • Warranty: Million Mile Limited

K&N Orion Universal Air Intake System 54-5000

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.