Category: Industry

Speedmaster (PCE195.1001): PCE High-Volume Short Satin Water-Pump w/o Heater Port for Small Block Chevy 350

David Ayers Leave a comment
Use This Post Clip for Email
Speedmaster (PCE195.1001): PCE High-Volume Short Satin Water-Pump w/o Heater Port for Small Block Chevy 350

This PCE brand mechanical Water Pump is design for Small Block Chevy 350 engines. It is specifically designed for high-volume applications and does not include a heater port. The short design flows 40% more coolant than stock water pumps. It features ribbed aluminum housing with a satin finish and a ball/roller bearing assembly designed for heavy-duty use.

Features:

  • Fits Small Block Chevy 350 engines
  • For high-volume applications
  • Short design without heater pump
  • Flows 40% more coolant than OEM
  • Ribbed aluminum housing
  • Satin pump finish
  • Heavy-duty ball/roller bearing assembly

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (33-5106): Reusable High-Flow Air Filter™ for `20 Jeep Wrangler 3.0L V6

David Ayers Leave a comment
Use This Post Clip for Email
K&N (33-5106): Reusable High-Flow Air Filter™ for `20 Jeep Wrangler 3.0L V6

K&N’s washable, Reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media that is engineered to improve airflow and capture contaminants. Plus, they are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Each Reusable High-Flow Air Filter is backed by K&N’s 10-Year/Million-Mile Limited Warranty. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Features:

  • For `20 Jeep Wrangler 3.0L V6 Diesel (all models)
  • Washable & reusable design
  • Made to last the lifetime of your vehicle
  • Increases horsepower and performance
  • Provides high airflow & exceptional filtration
  • Only needs cleaning every 50,000 miles under normal highway use
  • Does not void vehicle warranty
  • Emissions legal in all 50 states
  • 10-Year/Million-Mile Limited Warranty

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

The NOCO Company: NOCO genius®10™ Battery Charger™ + Maintainer

David Ayers Leave a comment
Use This Post Clip for Email
The NOCO Company: NOCO genius®10™ Battery Charger™ + Maintainer

The all-new NOCO genius®10™ Battery Charger™ by The NOCO Company is one of the most powerful, highest-performing, energy-efficient, compact chargers. It is 17% smaller and delivers over 115% more power than other models. It is a 6-volt and 12-volt battery charger, maintainer, and desulfator rated at 10 amps for lead-acid automotive, marine, and deep-cycle batteries (including flooded, gel, AGM, maintenance-free, and lithium-ion batteries). This battery can charge dead batteries as low as 1 volt. Or, the all-new Force Mode allows you to take control and manually begin to charge dead batteries down to 0 volts. The built-in desulfation mode is designed for the most corroded batteries. Auto detection with smart diagnostic indicators starts the Repair Mode integrated within a 9-step charging profile. The integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over charging in hot climates and under charging in cold climates. This battery provides 24/7 worry-free charging in all seasons and all weather to guarantee charging for a healthy battery. You can leave it plugged in 24//7 with no worries of overcharging because it automatically returns to its last selected mode. The genius® clamps are built with needle-nose profiles for smaller terminal applications and detachable, integrated eyelets for permanently mounting this accessory to the battery. 

Features:

  • Compatible with most vehicles
  • For 6V or 12V batteries
  • 17% smaller with 115% more power
  • Provides all-season, all-weather charging
  • Built-in desulfation mode for corroded batteries
  • Force Mode for manually charging batteries down to 0V
  • Integrated thermal sensor prevents over/under charging
  • Charges dead batteries as low as 1V
  • Clamps feature built-in needle-nose profiles
  • Integrated eyelets directly attach clamp to battery terminal
  • Interchangeable connector
  • Simple to setup & use
  • Includes mounting bracket with strap & (2) self-tapping screws

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (141-882): Valve Covers with Bow Tie Chevrolet Design

David Ayers Leave a comment
Use This Post Clip for Email
PROFORM (141-882): Valve Covers with Bowtie Chevrolet Design

Shark gray is the latest look in the PROFORM Collector Series finishes. These tall, stamped-steel valve covers are electrostatically painted and then baked with a durable epoxy paint. The famous Chevrolet and Bowtie emblems are recessed and hand-painted red to add a pop of color to the overall sleek design. These valve covers are designed to fit Chevrolet Small Block V8 engines made from 1955–1986.

Features:

  • Fits `55-`86 262–400 Small Block V8 Chevy Engines
  • Tall, electrostatically painted design with baffles
  • Shark gray epoxy finish with red Chevy & Bow Tie logos
  • Made from quality, heavy-duty material
  • Officially Licensed Chevrolet Performance product
  • Sold as a pair

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce (700479): Billet Steel Clutch Flywheel

David Ayers Leave a comment
Use This Post Clip for Email
Centerforce (700479): Billet Steel Clutch Flywheel

Centerforce® Steel Flywheels are manufactured from high-quality billet steel. This high-inertia flywheel helps the engine maintain RPM’s while adventuring through rough terrain. This model is specifically designed for 2005-2006 Wrangler Rubicon/Unlimited 6-speed Jeeps (with naturally-aspirated, gasoline, 4.0L, L6, 242 Cid engines). These Flywheels feature a CAD/CAM design that is CNC-machined from billet steel for a heavy-duty construction created for high inertia that also offers corrosion resistance and longevity in any weather. These Flywheels are also SFI-certified, so you know they are reliable both on the street or on the track. Installation is simple with a no-hassle, bolt-in installation process.  

Centerforce (700479): Billet Steel Clutch Flywheel

Features:  

  • For `05-`06 Wrangler Rubicon/Unlimited 4.0 L6 (Gas, naturally-aspirated, 6-speed) 
  • Made from high-quality billet steel 
  • Created for high inertia 
  • Precision balanced 
  • CAD/CAM designed 
  • CNC-machined construction 
  • No-hassle bolt-in installation 
  • Made in the USA 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor Cable Products (55701–555751): Spacer-Max Valve-Cover Riser

David Ayers Leave a comment
Use This Post Clip for Email
Taylor Cable Products (55701–555751): Spacer-Max Valve-Cover Riser

Using aftermarket rockers can pose a clearance problem when they are used with stock valve covers. This is especially true with high-ratio rockers or shaft-mounted rocker systems. In the past, the solution for this problem meant purchasing expensive tall valve covers. However, that is no longer a problem because Taylor Cable has developed a clearance solution that delivers a high-tech look while maintaining affordability and ease of installation with the new Spacer-Max Valve-Cover Riser. These Risers are available in three different sizes corresponding to specific clearance requirements: ½”, ¾”, and 1”. These Valve-Cover Risers are CNC-machined from T-6061 billet aluminum and tumble finished for a high-quality, high-tech appearance. 

The ½” kit accommodates most clearance requirements for the street and strip enthusiast, while the ¾” and 1” kits are designed for the all-out serious racer. Spacer-Max kits come with everything required for installation, including extra O-ring gaskets to replace any that show excessive wear on the original valve covers and all other installation hardware. Current applications cover all the new GM LS1, LS2, LS6, ZO6 and 1999-2005 GEN III VORTEC truck engines, with many more applications to come. 

Features: 

  • For all new GM LS1, LS2, LS6, ZO6, & `99-`05 Gen III VORTEC truck engines 
  • CNC-machined from T-6061 billet aluminum 
  • Tumbled finish offers a high-tech appearance 
  • Available in ½”, ¾”, & 1” models 
  • Includes all installation hardware & extra O-ring gaskets 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (440-833): Slant-Edge Air Cleaner with Mopar® Emblem

David Ayers Leave a comment
Use This Post Clip for Email
PROFORM (440-833): Slant-Edge Air Cleaner with Mopar® Emblem

The Slant-Edge Air Cleaner is the perfect way to completely dress-up your engine bay with a sleek, classic look. If you’ve got polished or chrome valve covers, this Air Cleaner will set your engine bay off like no other air cleaner. The over-sized Mopar® emblem with black inlaid paint takes style to the next level. Each Air Cleaner is supplied with genuine 3-inch GM air-filter elements (GM PN: 6421746, AC Delco PN: A212CW) for maximum airflow and quality. Also, each kit is supplied with all necessary mounting hardware. This Slant-Edge Air Cleaner is an officially licensed Mopar® product. 

Features: 

  • Fits 5-1/8” & 4-7/32” carburetor necks 
  • 14” diameter 
  • Slant-edge design 
  • Die-cast aluminum construction 
  • Polished finish 
  • Includes genuine GM (AC Delco) air filter 
  • Officially licensed Mopar® product  

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FiTech (50005): Dual-Pump Force Fuel System (340 lph)

David Ayers Leave a comment
Use This Post Clip for Email
FiTech (50005): Dual-Pump Force Fuel System (340 lph)

The new FiTech Dual-Pump Force Fuel System makes upgrading to an EFI system easy, while still supporting up to 1,600 horsepower. This system works in concert with a mechanical or an electrical fuel pump in order to supply the Force Fuel reservoir with fuel where it is. Then, it is fed through two internal 340 lph pumps to feed the EFI system. Dual internal regulators keep the pressure at a consistent 58 psi, which is ideal for reliable EFI performance. This assembly holds ½ gallons of fuel to completely submerge the pumps with no chance of fuel starvation. With a strong, versatile mounting bracket it is easy to mount this system under the hood. This Dual-Pump Force Fuel System is the easiest way to deliver fuel to your high-horsepower, fuel-hungry engine.   

Features: 

  • Compatible with E85, gas, & alcohol- or methanol-based fuels 
  • Works with mechanical or electrical fuel pump 
  • Supports up to 1,600 horsepower (gasoline) 
  • Equipped with (2) 340 lph fuel pumps 
  • Dual internal regulators 
  • Consistent pressure at 58 psi 
  • No chance of cavitation 
  • Versatile side or bottom mounting bracket 
  • Easy installation process 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (68786): Camshaft Degree-Wheel Kit for GM LS Engines

David Ayers Leave a comment
Use This Post Clip for Email

This Camshaft Degree-Wheel Kit by PROFORM is made for use with the GM LS engine. This kit includes all the tools required for degreeing the camshaft when the cylinder head is off the engine. It also assures proper cam timing and lobe fit. Each kit contains a 9-inch degree wheel, a dial indicator, an adjustable blue billet-aluminum dial indicator mount, a black top dead-center locator, a wire degree-wheel pointer, a professional-grade stainless-steel crankshaft turning socket, a durable foam-padded carrying case, and detailed instructions.  

Features:  

  • For GM LS engines 
  • Degrees camshaft when cylinder head is off the engine 
  • Deluxe 9” degree wheel 
  • High-quality steel & billet aluminum construction 
  • Dial indicator with adjustable mount 
  • Professional stainless-steel crankshaft turning socket 
  • Black top dead center locator 
  • Wire degree wheel pointer 
  • Foam-padded carrying case 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Racing Power Company (R5860–R5882): Wood Steering Wheel

David Ayers Leave a comment
Use This Post Clip for Email

Add a classic, vintage design to your vehicle with Racing Power Company’s Wood Steering Wheels. The sleek design adds an overall polished look to any vehicle, especially hot rods and restomods. All RPC Wood Steering Wheels feature a mahogany wood grip connected to spokes made from either brushed aluminum or brushed stainless steel. Each Steering Wheel also features a gloss urethane coating designed for greater heat resistance and longevity. They all come in either a 14-inch or 15-inch wheel diameter and have a stylish decorative center unique to each part number. The Banjo style, Vintage style, and Wings style are a few of the various center designs available. These Steering Wheels include a matching horn button*, horn button bezel, horn wire, and mounting hardware. Steering Wheel Adaptors are sold separately.  

Features: 

  • Universal design with application-specific Steering Wheel Adaptor (sold separately) 
  • Available in a 14” or 15” diameter 
  • Wooden grip made of mahogany 
  • Decorative center & spoke design is unique to each part # 
  • Center/spokes made of brushed stainless steel or brushed aluminum 
  • Gloss urethane coating for heat resistance & longevity 
  • Includes horn button*, horn button bezel, horn wire, & mounting hardware 

*PN: R5863 does not include horn button 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.