Category: Industry

PerTronix (Bundle003): Plug-and-Play Ignition Kit with Ignitor 3 Distributor for Chevy SB/BB

David Ayers Leave a comment
Use This Post Clip for Email

The PerTronix Bundle003 ignition kit is designed to provide maximum ignition performance at an enthusiast-friendly price point. Kit includes a Chevy SB/BB billet plug-and-play Ignitor 3 (I3) distributor with black female cap, Flame-Thrower III chrome coil, and Flame-Thrower MAGx2 universal black spark plug wires with 90-degree plug boot ends.

PerTronix’s I3 billet distributors ship with all-new Ignitor III multi-spark rev-limiting modules, which replace outdated points, electronic distributors, and bulky HEIs. Just install the distributor, connect two wires, and turn the crank! The I3 provides multiple sparks throughout the RPM range, with LED feedback, memory safe function, adaptive dwell for peak energy maintenance and reduced misfires, auto-adjusting spark timing at high RPMs, and reverse polarity and over-current protection.

Coming in at 45,000 volts, PerTronix Flame-Thrower III coils boast an extra-low resistance, with a high-turns ratio and ultra-low primary resistance; together, these properties let the ignition system charge faster at high RPMs. Drivers will also enjoy a rapid charge time and full 50-state and Canadian legality (CARB E.O. #D-57-21).

Finally, PerTronix Flame-Thrower MAGx2 wires feature factory-terminated ends for a superior connection and a perfect fit—no cutting, crimping, or splicing required—two current paths for redundancy-enhanced reliability; a temperature-, moisture-, oil-, and chemical-resistant 8mm silicone jacket; and reinforced fiberglass braid.

Ignitor 3 Distributor Features

  • Plug-and-play billet distributors designed for maximum ignition performance at an affordable price.
  • Ignitor III multi-spark rev-limiting modules.
  • Precision CNC-machined 6061-T6 billet aluminum housings are light yet strong.
  • Hand polished and buffed to a high luster.
  • Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
  • Adjustable mechanical advance with proprietary limiting function permits multiple settings.
  • Factory set with a performance advance curve, with additional springs for custom advance.

Flame-Thrower III Coil Features

  • 45,000 volts.
  • Ultra-low 0.32 primary resistance.
  • Compatible with Ignitor II and III systems as well as most capacitive discharge systems.
  • Charges to peak current 30–70% faster than other coils.
  • Rapid charge time means maximum spark energy is sustained to higher engine RPM.

Flame-Thrower MAGx2 Wire Features

  • 90-degree plug boot ends.
  • Two current paths for reliability and redundancy: primary spiral-wound stainless steel alloy and secondary carbon-impregnated fiberglass center core.
  • Low 500 ohm-per-foot resistance.
  • 8mm silicone jacket resists high temperatures, moisture, oil, and chemicals.
  • EPDM (ethylene propylene diene methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass-reinforced braid for added strength and flexibility.
PerTronix Plug and Play Ignition Kit with I3 Distributor for Chevy BB and SB Bundle003

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: HOT RODZ Headers

David Ayers Leave a comment
Use This Post Clip for Email

With its line of HOT RODZ headers, Hedman Hedders has addressed the special needs of hot rodders by catering specifically to non-factory engine and vehicle model combinations. Facilitating builds that combine parts that were never designed to work together, HOT RODZ headers are available for engine swaps, street rods, and passenger cars and trucks. Made in the USA from coated or uncoated mild steel.

Features

  • Specifically designed for hot rods with unlikely part combinations.
  • Available for engine swaps, street rods, and passenger cars/trucks.
  • Coated or uncoated mild steel.
  • Made in the USA.
Hedman Hedders Hot Rodz Headers 69560

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products: Buy Temp Gauge and Save Up to $250 on Entire Qualifying Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good February 1–28. Click image for printable form and complete details!

AutoMeter Cool Temps Hot Savings Rebate

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (050510): Under Hood Thermal Acoustic Lining

David Ayers Leave a comment
Use This Post Clip for Email

Straight from the innovators at Design Engineering, Inc., Under Hood Thermal Acoustic Lining greatly reduces heat and noise generated in the automotive engine compartments of today’s modern modified vehicles. Installing via a simple peel-and-stick 5 ml acrylic adhesive that produces a permanent bond, the 3/4” thick, marine-grade acoustical foam is reinforced with a reflective aluminum skin. This material not only insulates the underside of the hood, but it also protects your vehicle’s paint finish. In addition, DEI’s Under Hood Thermal Acoustic Lining can be used as a noise-control solution on generator boxes, industrial HVAC scenarios, and similar applications.

Features

  • Insulate from heat while reducing noise and vibration.
  • Peel-and-stick self-adhesive creates a permanent bond.
  • Protects paint finishes.
  • 3/4” thick and 32” x 54” (12 sq. ft.).
  • Temp range: -45° F to 275° F.
DEI Under Hood Thermal Acoustic Lining 2

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (252-381): MCAD Air Intake System for ’16-’19 Chevrolet Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

All-black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX synthetic filter give your Camaro SS a boost with increased torque and horsepower (up to 21.7 on the dyno). The AIRAID MCAD intake system removes the stock intake track on your vehicle and adds an open-element air inlet protected by cold air dam panels, protecting the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage; it’s also washable and reusable.

The 252-381 AIRAID MCAD intake system mounts in your Camaro’s factory location with no drilling required; in fact, installation typically clocks in at less than 90 minutes using standard hand tools.

Note: Not legal for sale or use in California.

Features

  • Increases horsepower and torque.
  • Replaces stock air box, air filter, and intake tubing.
  • Durable powder-coated finish.
  • Low-restriction aluminum intake tube.
  • Easy to install using standard tools.
  • Easy-to-clean, oil-free, reusable synthetic air filter.
  • Warranty: “NO-Hassle” lifetime limited.
AIRAID MCAD Air Intake System for Chevy Camaro SS 252-381

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Royal Purple Max Gear High Performance Gear Oil

Royal Purple: Max Gear High Performance Synthetic Gear Oil

David Ayers Leave a comment
Use This Post Clip for Email

Recommended for use in truck and automotive front or rear differentials, manual transmissions, and lower-gear units of marine engines that use API GL-5 or GL-4 fluid, Max Gear high performance synthetic gear oil from Royal Purple is specially designed to extend gear and bearing life. It won’t corrode soft yellow metals, is synchronizer safe, and provides superior protection over competing conventional and synthetic gear oils.

Max Gear fulfills this function while maximizing power throughout the drivetrain, making gears run smoother, quieter, cooler, and longer without overhaul. A direct benefit is an increase in fuel efficiency for trucks and other four-wheel-drive vehicles. With its integrated friction modifier additive, Max Gear requires no additives to function optimally.

Royal Purple makes Max Gear in the following viscosities: 75W-90, 75W-140, 80W-90, 85W-140, and SAE 90.

Features

  • Maximizes horsepower and extends gear/bearing life.
  • Reduces operating temperature and offers severe service performance.
  • Lower coefficient of friction and superior corrosion protection.
  • Formulated for limited-slip differential use.
  • Separates rapidly from water and meets warranty requirements.
  • Environmentally responsible formulation.
Royal Purple Max Gear High Performance Gear Oil

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (1011SP): Lowering Kit with Street Performance Shocks for ’16.5-’18 GM Trucks

David Ayers Leave a comment
Use This Post Clip for Email

The 1011SP Belltech lowering kit helps you lower your 2016.5–2018 Silverado or Sierra (all cabs, 2WD, 2F/4R) right the first time, as it includes all the parts and pieces you need to get the look, alignment, performance, and safety you’re looking for. This all-in-one solution includes Street Performance shocks.

Note: Must have alumi/stanped control.

Features

  • For 2016.5–2018 Chevy Silverado and GMC Sierra (all cabs, 2WD, 2F/4R).
  • Complete kit includes Street Performance shocks.
  • Lower your truck correctly the first time with the right look, alignment, performance, and safety.
Belltech Lowering Kit with Street Performance Shocks for Sierra Silverado 1011SP

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR20302): VDOG Variable Angle Gear

David Ayers Leave a comment
Use This Post Clip for Email

Winner of the Best New Street Rod Product and Best Engineered New Product awards at SEMA 2018, the aluminum-constructed VDOG variable angle gear from Flaming River features an output shaft (3/4” by 36 spline) that is compatible with universal joints. Gear driven without any chains or sprockets, the FR20302 can be mounted horizontally or vertically—flexibility that is ideal for cab-over vehicles, T-buckets, and specialty builds with big motors and tight firewall clearance. Made in the USA!

Features

  • 90-degree gear box with a 35-degree variable angle shaft.
  • All gear drive—no chains or sprockets.
  • Articulating ball for maximum adjustability.
  • 1:1 ratio maintains rack and pinion or steering box gear ratio.
  • Can be mounted vertically or horizontally.
  • Made in the USA.
Flaming River VDOG Variable Angle Gear FR20302

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products: Elite Digital Gauges

David Ayers Leave a comment
Use This Post Clip for Email

Elite Digital gauges from AutoMeter are now available in the company’s most popular series: Ultra-Lite, Sport-Comp, Phantom, and Cobalt. Thanks to their dual radial LED and digital readout combination, these gauges allow enthusiasts to display independent parameters on each dial, view the difference between them, or view the same parameter on both displays. Pro-Control output gives these gauges the ability to activate fans, relays, switches, and more—letting drivers focus on the task at hand.

Other features include user-programmable warnings, peak recall function, imperial or metric scaling, 0–5 volt analog output, and push buttons that eliminate the need for computer integration.

Features

  • Dual radial LED and digital readouts.
  • Pro-Control output activates fans, relays, switches, and more.
  • Push buttons eliminate the need for computer integration.
  • User-programmable warnings and peak recall function.
  • Imperial or metric scaling.
  • 0–5 volt analog output lets gauges provide information to data loggers, ECUs, etc.
  • Stand alone or can be mixed and matched with other products in AutoMeter’s Ultra-Lite, Sport-Comp, Phantom, and Cobalt lines.
AutoMeter Elite Digital Series Gauges

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FiTech (40015): Hy-Fuel Tight-Fit In-Tank Retrofit Kit

David Ayers Leave a comment
Use This Post Clip for Email

FiTech’s Hy-Fuel tight-fit in-tank retrofit kit is a sleek miniature assembly that lets you fit a high-volume fuel system into almost any tank. 40015 is perfect for original or aftermarket fuel tanks, fuel cells with limited space, or a Tanks, Inc. EFI tank.

Designed with clearance considerations top of mind, this FiTech system packs a 1-1/8” tall top (including gasket) for maximum clearance under the rear floor pan. The 40015 module comes with a 255 l/h pump able to handle up to 600 hp naturally aspirated. It is also depth adjustable for tanks from 6” to 12”.

  • Fuel pump system for limited-space applications.
  • Designed to be retrofitted into an existing tank.
  • Single high-quality 255 l/h fuel pump for engines up to 600 hp.
  • Installs in almost any tank with a depth of 6–12”.
  • Low-profile design for maximum clearance from floor pan of vehicle.
  • Billet aluminum construction with precision-machined components.
  • Unique O-ring 360° mounting flange permits easy removal for servicing and reuse ( -06 AN fittings).
  • 35 sq. in. filter and 11-5/8 sq. in. filter.
  • Compatible with E-85 gasoline and alcohol- or methanol-based fuels.
FiTech Hy-Fuel Tight-Fit In-Tank Retrofit Kit 40015

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.