Category: Industry

Racing Power Company (R3070): LS1 Rocker Arms with Trunion Upgrade

David Ayers Leave a comment
Use This Post Clip for Email

Designed to handle higher spring pressures and engine RPMs over stock, these LS1 rocker arms from Racing Power Company are forged from quality steel alloy and include caged roller bearings and 8620 steel trunions for superior durability and performance.

The R3070 LS1 rocker arms meet or exceed OE specifications and include one set of 16 rocker arms and new mounting bolts. This Racing Power Company kit is a 100% drop-in design for a hassle-free installation: just rotate the trunion with the flat recess facing up, then tighten bolts to 22 ft-lb following the factory procedure.

Note: Legal for off-road use and on non–pollution controlled vehicles (1965+); however, not tested or approved by CARB for highway vehicles in California.

Features

  • For LS1/LS2/LS6
  • Also fits LR4/LM7/L59/LM4/L33 Vortec 4.8./5.3/5.7/6.0
  • Straight intake rocker with 1.7 rocker ratio
  • 8620 steel-alloy trunion
  • 100% drop-in design
  • Fully caged roller bearings
Racing Power Company LS1 Rocker Arms R3070

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (34938): 2.5” Leveling Kit for ’19-’20 Ford Ranger

David Ayers Leave a comment
Use This Post Clip for Email

Want bigger, more aggressive tires on your 2019–2020 Ford Ranger? Belltech has done its level best when it comes to helping Ranger owners eliminate 2.5’ of front rake from their pickups. The 34938 kit offers an economical and simple way to create the clearance needed to install up to 31” aggressive off-road tires. Compatible with XL, XLT, and Lariat models.

Features

  • For 2019–2020 Ford Ranger
  • Eliminates 2.5” of front rake
  • Levels truck to allow for up to 31” aggressive off-road tires
  • Compatible with XL, XLT, and Lariat models
Belltech 2.5 Inch Leveling Kit for 19-20 Ford Ranger 34938

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor Cable Products: ThunderVolt 50 Race Fit and Universal Wire Sets

David Ayers Leave a comment
Use This Post Clip for Email

Ignite your high performance aspirations with ThunderVolt 50 from Taylor Cable Products, the best .409”, 10.4 mm ignition wires on the market. ThunderVolt 50 wire is IROC dyno tested and track proven to achieve gains of 5 hp and 7 lb torque over the competition.

Compatible with most electronic ignition systems and components, Taylor’s 40 Ohm/ft Ferrite Spiral-Wound, low-resistance core provides optimal RFI and EMI suppression, while the tightly woven, heat-treated fiberglass braid eliminates the need for additional sleeving. Finally, the exclusive, three-layer ZIMPLEX silicone outer jacket provides heat and abrasion protection up to 600°F and 102,000 volts of dielectric strength—a must for the extreme conditions of open-wheel racing and under-hood temperatures.

Taylor offers ThunderVolt 50 wire sets in black with gold lettering.

Note: Compatible with most American-made vehicles, universal-fit sets will require cutting to fit.

Features

  • 10.4 mm ignition wire compatible with most electronic ignition systems/components
  • IROC dyno tested and track proven to provide +5 hp and +7 lb torque
  • 40 Ohm/ft Ferrite Spiral-Wound coated core
  • Tightly woven, heat-treated fiberglass braid eliminates the need for additional sleeving.
  • Three-layer ZIMPLEX silicone outer jacket protects against heat up to 600°F and 102,000 volts of dielectric strength.
  • Available in black with gold lettering
Taylor Cable Products ThunderVolt 50 Race Fit and Universal Wire Sets 98045

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce: LMC Series Clutches

David Ayers Leave a comment
Use This Post Clip for Email

Let there be “light”: low-inertia LMC Series clutches from Centerforce are designed to dramatically reduce engine rotating mass. When used with Centerforce’s aluminum flywheels, LMC Series clutches bring “lightweight” to a whole new level.

LMC Series clutches are SFI-approved for competition, intended for most road racing and circle track applications. Centerforce machines these special pressure plates from high-strength, aircraft-grade billet aluminum, then attaches a special heat-treated, replaceable friction surface. A dual-segmented carbon-composite lining further offers improved cooling and excellent torque capacity, while the patented “ball bearing” actuated diaphragm and centrifugal weight system create maximum grip and maintain a comfortable and controllable clutch pedal.

Features

  • SFI approved
  • Lightweight, aircraft-grade aluminum
  • Replaceable friction surface
  • Patented ball bearing pressure plate
  • Smooth engagement, light pedal effort, and increased holding capacity
Centerforce LMC Clutch Series

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FST Carburetors (41750B-2): Billet X-treme Pro Carburetor

David Ayers Leave a comment
Use This Post Clip for Email

Get the high performance edge you’re looking for with the Billet X-treme Pro carburetor from FST Carburetors. This 750 cfm carb with mechanical secondary has a CNC-machined main body and FST’s high performance metering blocks, each with five stages of emulsion for a wider tuning range. The 41750B-2 carb can handle the various demands of all current fuels, including methanol and ethanol. This is bolt-on power at its finest from FST Carburetors.

Features

  • 750 cfm
  • Mechanical secondary
  • CNC-machined main body
  • Five stages of emulsion for wider tuning range
  • Compatible with all modern fuels, including methanol/ethanol
FST Carburetors Billet X-treme Pro Carburetor 41750B-2

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: 4” Lift Kit with Front Sway Bar for ’19-’21 GM 1500 4WD

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking for the best-riding lift on the market, you’ve found it in the complete 4” lift kit for 2019–2021 Silverado/Sierra 1500 4WD from Belltech. The 150212SPS kit is a direct bolt-on solution, made in the USA to ride, handle, and dominate off-road environments without sacrificing turning radius or requiring any complicated cutting or welding.

Headlined by a cold-formed, solid-steel front sway bar that improves handling and steering response by minimizing body roll, this 4” lift kit will retain factory alignment cams and specifications and track width—all without introducing bump steer! Like all Belltech’s 4” lift kits, this one includes custom front height–adjustable Trail Performance struts and Trail Performance rear shocks. Belltech is in this one for the long haul, too, offering a lifetime warranty for your peace of mind.

Features

  • For 2019–2021 Silverado/Sierra 1500 4WD
  • Complete 4” lift kit with front sway bar
  • Custom front height–adjustable Trail Performance struts and Trail Performance rear shocks
  • Retains factory factory alignment cams and specifications and track width
  • Includes heavy-duty, black-zinc hardware and 1/4” laser-cut skid plate
  • Direct, bolt-on solution (no cutting or welding)
  • Warranty: lifetime
Belltech 4 Inch Lift Kit Front Sway Bar for 19-21 GM 1500 4WD 150212SPS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SCT: Burst Electronic Throttle Enhancement Device

David Ayers Leave a comment
Use This Post Clip for Email

If you’re craving a few more Gs in your seat, pick up the SCT Burst to kick up your vehicle’s throttle response and driving characteristics. The Burst installs in just 10 minutes by plugging inline between your ride’s pedal position sensor and harness. Then with the turn of the simple control knob, you’ll be able to adjust your throttle on the fly—giving you that extra “burst” just when you need it. SCT designed the Burst to be fully waterproof with OE-quality connectors. Enjoy extra power that will not void your vehicle’s warranty, with live technical support and plug-and-play convenience. Made in the USA!

Features

  • Improves acceleration and reduces lag time
  • Plug-and-play installation in just 10 minutes
  • On-the-fly adjustments with intuitive control knob
  • Weatherproof design
  • Live technical support
  • Will not void your vehicle’s warranty
  • Made in the USA
SCT Burst

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ST Suspensions (27327019): ST Adjustable Lowering Springs for 2011+ Dodge Challenger/Charger

David Ayers Leave a comment
Use This Post Clip for Email

Get low and go fast with ST adjustable lowering springs from ST Suspensions. Designed for 2011-and-up Dodge Challenger and Charger without electronic suspension (Monroe dampers), the 27327019 kit is an alternative to standard springs, allowing you to adjust the height of your car even after installation—which means you can dial in a height to match your wheel and tire combination. This modification will improve steering behavior and agility while perfectly complementing your OE dampers.

Features

  • For 2011+ Dodge Challenger/Charger without electronic suspension (Monroe dampers)
  • Adjust ride height even after installation
  • Dial in height to match custom wheel and tire combinations
  • Improves steering behavior and agility
  • Matches OE dampers
ST Suspensions Adjustable Lowering Springs for 2011 Challenger_Charger 27327019

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66985): Heavy-Duty Stud-Mount Billet Distributor Clamp for Chevy V6/V8

David Ayers Leave a comment
Use This Post Clip for Email

Amp up the aftermarket swagger of your engine with this heavy-duty stud-mount billet distributor clamp from PROFORM. Made from quality aluminum with a machined finish, the stout 66985 clamp fits Chevy V6 and V8 engines and includes the stud, nut, and washer for installation. Sold in singles.

Features

  • For Chevy V6 and V8 engines
  • Quality aluminum with a machined finish
  • Heavy-duty stud-mount model
  • Includes stud, nut, and washer
  • Sold individually
PROFORM Heavy Duty Stud Mount Billet Distributor Clamp for Chevy V6_V8 66985

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RaceQuip: PRO20 Snell SA2020 Full-Face Helmets

David Ayers Leave a comment
Use This Post Clip for Email

PRO20 full-face helmets from RaceQuip combine contemporary styling and modern production techniques to provide outstanding protection and value suitable for all forms of motorsports (Snell2020 rating).

The PRO20 design includes a strong, lightweight, FRP composite shell; reinforced M6 threaded HANS/HNR inserts (anchor posts not included); hook-and-loop cheek pads; distortion-free, eyewear-capable 3 mm polycarbonate faceshield; silicone eyeport gasket to seal out dirt; medium-sized chin spoiler; and a comfort-fit, blended Nomex interior with exhaust vents at top and back to help you keep your cool.

Available in Gloss Black, White, or Steel; Flat Black; Hot Pink; Corsa Red; America; and Carbon Fiber in sizes 2XS–3X.

Features

  • Snell2020 rated
  • FRP composite shell
  • Reinforced M6 threaded HANS/HNR inserts (anchor posts not included)
  • 3 mm polycarbonate faceshield accommodates personal eyewear and provides good peripheral vision.
  • Silicone eyeport gasket keeps out dirt.
  • Comfort-fit, blended Nomex interior
  • Top and back thermal exhaust ports
  • 8 colors: Gloss Black, Gloss White, Gloss Steel, Flat Black, Hot Pink, Corsa Red, America, and Carbon Fiber
  • 8 sizes: 2XS, XS, S, M, L, XL, 2XL, and 3XL
RacqQuip PRO20 Snell SA2020 Full Face Helmets

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.