PROFORM (66431): Universal 50-Amp Mini Alternator

If you don’t need your alternator to power a city block, the 66431 50-amp mini alternator from PROFORM packs the punch you need while adding just 6 lb to your build. This reliable, chrome-finished, one-wire alternator is 100% new, includes a machined V-belt pulley, and is tested at the component and finish levels to ensure a premium experience.

Features

  • 50-amp output
  • Universal one-wire style
  • Machined V-belt pulley
  • Not remanufactured or refurbished
  • 96 mm housing
  • Weight: 6 lb
  • Finish: chrome
PROFORM 50 Amp Mini Alternator 66431

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (050551): Stainless Thermal and Acoustical Floor & Tunnel Shield

Engine and exhaust heat got you burning up? Engine noise rattling your skull? If you need to dial things down a notch in your vehicle’s interior, the new stainless steel Floor & Tunnel Shield from Design Engineering, Inc. is your solution.

DEI designed the 050551 Floor & Tunnel shield to be a versatile high-temperature (1,750°F direct heat) solution, backing sound-absorbing, micro-perforated stainless steel with 100% e-glass insulation. Peel-away adhesive backing gives you custom control that’s easy to apply: just cut with heavy scissors and stick. Available in 22” x 19” sheets.

Features

  • Durable stainless steel outer layer
  • Micro perforations absorb sound waves.
  • Backed with 100% e-glass insulation
  • Direct heat resistance: 1,750°F
  • Peel-and-stick adhesive backing
  • Cuts with heavy scissors
  • 22” x 19” sheet
DEI Stainless Acoustic and Thermal Barrier 050551

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (141-882): Classic Style Chevrolet Air Cleaner Kit with Center Nut

PROFORM has brought its new dress-up color for Chevrolet Performance—Shark Gray—to its classic-style Chevy air cleaner kit. The red pops of color, including on the Bowtie-shaped air cleaner center nut, contrast handsomely with the new finish to give your engine bay a premium look. Includes a 14” stamped-steel cleaner, genuine GM AC Delco air filter, and all necessary hardware. Fits 5 1/8” and 4 7/32” carb necks. This complete kit is a licensed Chevrolet Performance product!

Features

  • NEW Shark Gray Chevrolet Performance finish
  • Fits 5 1/8” and 4 7/32” carb necks
  • 14” stamped-steel construction
  • Bowtie center nut with red outline
  • Includes genuine GM (AC Delco) air filter
  • Officially licensed Chevy Performance product
PROFORM Classic Chevy Air Cleaner with Center Nut 141-882

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: 6”-8” Suspension Lift Variations for ’07-’18 GM 1500 4×4

Get the lift and handling your GM 1500 4×4 has been waiting for with a Belltech suspension lift kit. These direct bolt-on kits offer front-height adjustable Trail Performance struts and rear Trail Performance twin-tube shocks, and install with minimal cutting and no welding required. Your 2007–2018 GM pickup will become more capable without sacrificing quality or factory driving performance.

Belltech has given these suspension lift kits a new front crossmember that relocates the pivot points of the lower control arm and retains the proper LCA angle while maintaining maximum ground clearance. Lift spindles correct ball joint working angles and eliminate bumpsteer, while the ride height–adjustable struts and matching rear shocks ensure the correct bump and droop travel for the new height.

Available Parts

  • 2007–2016 GM 1500 4×4: 150201SPS, 150201SP, 150201BK
  • 2016–2018 GM 1500 4×4: 150203SPS, 150203SP, 150203BK

Features

  • For 2007–2018 Chevy Silverado and GMC Sierra 4×4
  • New front crossmember relocates LCA pivot points to retain proper angle.
  • Lift spindles correct ball joint working angles and camber curve.
  • Outer tie rod mounting location minimizes bumpsteer.
  • Custom-valved, ride height–adjustable, twin-tube Trail Performance struts
  • Rear Trail Performance shocks provide correct bump and droop travel for new height.
  • Two-piece front differential drop provides for proper pinion angle, full CV joint articulation, and drive shaft angularity.
  • Quarter-inch, laser-cut steel skid plate protects the front differential.
  • Direct bolt-on installation (minimal cutting and no welding required)
  • Includes step-by-step instructions
Belltech 7-8 Inch Suspension Lift Variants for 07-18 GM 1500 4x4

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Speedmaster (PCE195.1001): PCE High-Volume Short Satin Water-Pump w/o Heater Port for Small Block Chevy 350

Speedmaster (PCE195.1001): PCE High-Volume Short Satin Water-Pump w/o Heater Port for Small Block Chevy 350

This PCE brand mechanical Water Pump is design for Small Block Chevy 350 engines. It is specifically designed for high-volume applications and does not include a heater port. The short design flows 40% more coolant than stock water pumps. It features ribbed aluminum housing with a satin finish and a ball/roller bearing assembly designed for heavy-duty use.

Features:

  • Fits Small Block Chevy 350 engines
  • For high-volume applications
  • Short design without heater pump
  • Flows 40% more coolant than OEM
  • Ribbed aluminum housing
  • Satin pump finish
  • Heavy-duty ball/roller bearing assembly

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (33-5106): Reusable High-Flow Air Filter™ for `20 Jeep Wrangler 3.0L V6

K&N (33-5106): Reusable High-Flow Air Filter™ for `20 Jeep Wrangler 3.0L V6

K&N’s washable, Reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media that is engineered to improve airflow and capture contaminants. Plus, they are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Each Reusable High-Flow Air Filter is backed by K&N’s 10-Year/Million-Mile Limited Warranty. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Features:

  • For `20 Jeep Wrangler 3.0L V6 Diesel (all models)
  • Washable & reusable design
  • Made to last the lifetime of your vehicle
  • Increases horsepower and performance
  • Provides high airflow & exceptional filtration
  • Only needs cleaning every 50,000 miles under normal highway use
  • Does not void vehicle warranty
  • Emissions legal in all 50 states
  • 10-Year/Million-Mile Limited Warranty

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

The NOCO Company: NOCO genius®10™ Battery Charger™ + Maintainer

The NOCO Company: NOCO genius®10™ Battery Charger™ + Maintainer

The all-new NOCO genius®10™ Battery Charger™ by The NOCO Company is one of the most powerful, highest-performing, energy-efficient, compact chargers. It is 17% smaller and delivers over 115% more power than other models. It is a 6-volt and 12-volt battery charger, maintainer, and desulfator rated at 10 amps for lead-acid automotive, marine, and deep-cycle batteries (including flooded, gel, AGM, maintenance-free, and lithium-ion batteries). This battery can charge dead batteries as low as 1 volt. Or, the all-new Force Mode allows you to take control and manually begin to charge dead batteries down to 0 volts. The built-in desulfation mode is designed for the most corroded batteries. Auto detection with smart diagnostic indicators starts the Repair Mode integrated within a 9-step charging profile. The integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over charging in hot climates and under charging in cold climates. This battery provides 24/7 worry-free charging in all seasons and all weather to guarantee charging for a healthy battery. You can leave it plugged in 24//7 with no worries of overcharging because it automatically returns to its last selected mode. The genius® clamps are built with needle-nose profiles for smaller terminal applications and detachable, integrated eyelets for permanently mounting this accessory to the battery. 

Features:

  • Compatible with most vehicles
  • For 6V or 12V batteries
  • 17% smaller with 115% more power
  • Provides all-season, all-weather charging
  • Built-in desulfation mode for corroded batteries
  • Force Mode for manually charging batteries down to 0V
  • Integrated thermal sensor prevents over/under charging
  • Charges dead batteries as low as 1V
  • Clamps feature built-in needle-nose profiles
  • Integrated eyelets directly attach clamp to battery terminal
  • Interchangeable connector
  • Simple to setup & use
  • Includes mounting bracket with strap & (2) self-tapping screws

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (141-882): Valve Covers with Bow Tie Chevrolet Design

PROFORM (141-882): Valve Covers with Bowtie Chevrolet Design

Shark gray is the latest look in the PROFORM Collector Series finishes. These tall, stamped-steel valve covers are electrostatically painted and then baked with a durable epoxy paint. The famous Chevrolet and Bowtie emblems are recessed and hand-painted red to add a pop of color to the overall sleek design. These valve covers are designed to fit Chevrolet Small Block V8 engines made from 1955–1986.

Features:

  • Fits `55-`86 262–400 Small Block V8 Chevy Engines
  • Tall, electrostatically painted design with baffles
  • Shark gray epoxy finish with red Chevy & Bow Tie logos
  • Made from quality, heavy-duty material
  • Officially Licensed Chevrolet Performance product
  • Sold as a pair

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce (700479): Billet Steel Clutch Flywheel

Centerforce (700479): Billet Steel Clutch Flywheel

Centerforce® Steel Flywheels are manufactured from high-quality billet steel. This high-inertia flywheel helps the engine maintain RPM’s while adventuring through rough terrain. This model is specifically designed for 2005-2006 Wrangler Rubicon/Unlimited 6-speed Jeeps (with naturally-aspirated, gasoline, 4.0L, L6, 242 Cid engines). These Flywheels feature a CAD/CAM design that is CNC-machined from billet steel for a heavy-duty construction created for high inertia that also offers corrosion resistance and longevity in any weather. These Flywheels are also SFI-certified, so you know they are reliable both on the street or on the track. Installation is simple with a no-hassle, bolt-in installation process.  

Centerforce (700479): Billet Steel Clutch Flywheel

Features:  

  • For `05-`06 Wrangler Rubicon/Unlimited 4.0 L6 (Gas, naturally-aspirated, 6-speed) 
  • Made from high-quality billet steel 
  • Created for high inertia 
  • Precision balanced 
  • CAD/CAM designed 
  • CNC-machined construction 
  • No-hassle bolt-in installation 
  • Made in the USA 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor Cable Products (55701–555751): Spacer-Max Valve-Cover Riser

Taylor Cable Products (55701–555751): Spacer-Max Valve-Cover Riser

Using aftermarket rockers can pose a clearance problem when they are used with stock valve covers. This is especially true with high-ratio rockers or shaft-mounted rocker systems. In the past, the solution for this problem meant purchasing expensive tall valve covers. However, that is no longer a problem because Taylor Cable has developed a clearance solution that delivers a high-tech look while maintaining affordability and ease of installation with the new Spacer-Max Valve-Cover Riser. These Risers are available in three different sizes corresponding to specific clearance requirements: ½”, ¾”, and 1”. These Valve-Cover Risers are CNC-machined from T-6061 billet aluminum and tumble finished for a high-quality, high-tech appearance. 

The ½” kit accommodates most clearance requirements for the street and strip enthusiast, while the ¾” and 1” kits are designed for the all-out serious racer. Spacer-Max kits come with everything required for installation, including extra O-ring gaskets to replace any that show excessive wear on the original valve covers and all other installation hardware. Current applications cover all the new GM LS1, LS2, LS6, ZO6 and 1999-2005 GEN III VORTEC truck engines, with many more applications to come. 

Features: 

  • For all new GM LS1, LS2, LS6, ZO6, & `99-`05 Gen III VORTEC truck engines 
  • CNC-machined from T-6061 billet aluminum 
  • Tumbled finish offers a high-tech appearance 
  • Available in ½”, ¾”, & 1” models 
  • Includes all installation hardware & extra O-ring gaskets 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.