Category: News

AutoMeter (17121) A-Pillar Triple 2-1/16″ for Silverado/Sierra 14+

David Ayers Leave a comment
Use This Post Clip for Email

Durable, high-quality and customizable, the A-Pillar Triple gauge pod from AutoMeter is a great solution to your mounting needs in your Chevy Silverado or GMC Sierra 2014 and newer.

The A-Pillar Triple can be painted to match any interior, and it looks great with AutoMeter 2-1/16″ gauges. Installation is straightforward with no drilling or modification required.

  • Positions key performance data within driver’s field of vision
  • Professional fit and finish
  • No modification of factory trim piece required
  • Black textured finish which can be painted to match your interior
  • High quality, composite construction is incredibly durable
  • Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech Leveling Kits / 2019-2020 Jeep Gladiator

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking to add a lift to your Jeep Gladiator without breaking the bank, Belltech has launched two new economical kits. The Coil Spring Spacer Kit is great if you’re looking to simply level and the Front Coil Spring Spacer Kit is s 2.5″ lift, perfect if you’re wanting to add bigger, more aggressive tires.

Coil Spring Spacer Kit #34861 (front and rear lift)

  • Helps achieve a full 2.5″ lift
  • Perfect for bigger tires from 35″ up to 37″
  • Creates a leveled look while maintaining the same rake from front to back

Front Coil Spring Spacer Kit #34862 (front lift only)

  • Helps achieve an even, leveled appearance
  • Removes unwanted factory rake
  • Simple bolt-in design
  • Easy installation

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Top Street Performance: Finned Cast Aluminum Valve Covers with Coil Mounts and Covers for GM LS

David Ayers Leave a comment
Use This Post Clip for Email

Finned cast aluminum valve covers from Top Street Performance solve the problem of ugly ignition coils sitting on top of your newly dressed-up GM LS engine. These two-piece covers eliminate the need to relocate without sacrificing style. Each base has a tall internal height to allow for added valvetrain clearance, as well as provisions for mounting two of the most popular LS coil packs—no brackets required. Other features include a baffled, stock-style ventilation setup; cutouts for routing the wiring harness and spark plug wires; and a classic finned top.

Available in three finishes:

  • Black (JM8082-2BK)
  • Polished (JM8082-2P)
  • Satin (JM8082-2)

Features

  • Valve cover base mounts to LS1/2/3/6/7 engines
  • Provisions for Delco 510C and D580 ignition coils
  • 4.25” tall
  • Cast aluminum construction
  • Includes two covers
Top Street Performance Finned Cast Aluminum Valve Covers with Coil Mounts and Covers for GM LS JM8082-2P

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter (880789): Mopar Classic 3.75” Tachometer

David Ayers Leave a comment
Use This Post Clip for Email

The king of gauges is back with another outstanding addition to its lineup of legendary tachs. The 3.75” Mopar Classic tachometer (PN 880789) from AutoMeter reads up to 8,000 RPM, with traditional incandescent lighting to illuminate the dial’s perimeter. The 880789 tach, which is compatible with 12- and 16-volt systems, sports a race-proven air-core electric design and ultra-responsive needle for quick and accurate readings. The kit includes a bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed installation instructions. This is the no-compromise choice for no-compromise builds.

Features

  • Traditional incandescent lighting illuminates the perimeter of the dial.
  • 12 and 16 volt compatible
  • Includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
  • Race-proven air-core electric technology for quick and accurate readings
  • Responsive needle can go from zero to full scale in 333 ms.
  • Compatible with most 4-, 6-, and 8-cylinder engines
AutoMeter Mopar Classic Tachometer 880789

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FiTech (37001): Retro LS EFI 650 HP Fuel Injection System

David Ayers Leave a comment
Use This Post Clip for Email

The Retro LS EFI 650 HP fuel injection system from FiTech is a complete throttle body kit that delivers old-school carburetor looks alongside EFI technology and reliability. In addition to its classic gold finish and FiTech’s innovative annular-discharge design, the 37001 system gets you on the road faster and more easily than any other system on the market today: it comes with the needed wiring harness and sensors, a tight-fit regulator, and hand-held tuner—no computer experience required. And last but not least, this is a virtually maintenance-free system, keeping your vehicle reliable and ready to drive—no more vapor lock and fuel varnish issues.

Features

  • Transmission control for 4L60, 4L65, and 4L80 GM transmissions
  • Fits V8 engines (250–650 HP)
  • Includes connections for Ford and GM TH350, 700R4, and other transmission linkages
  • Classic gold finish for that carburetor look, with the drivability of EFI
  • Innovative annular-discharge design
  • Flow-matched 80 lb injectors and knock sensor control
  • Bosch wide band controlled and custom cam friendly
  • Fully self-tuning ECU (no laptop required)
  • Plug-and-play harnesses with minimal connections
FiTech Retro LS 650 HP EFI System 37001

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (010669): Vapor Lock™ Fuel Line Sleeve

David Ayers Leave a comment
Use This Post Clip for Email

The Vapor Lock™ fuel line sleeve from Design Engineering, Inc. prevents fuel and other fluids from boiling due to extreme heat and causing a vapor lock situation—along with the rough idling and difficult starting that accompany it. Made from glass fiber and polyester laminated to an aluminum outer layer, Vapor Lock™ fuel line sleeves (PN 010669) work by greatly reducing heat in the line to keep fuel cooler (340 degrees of direct heat resistance). Plus, thanks to its split design and adhesive flap, this DEI product installs easily without having to disconnect the fuel line.

Features

  • Use on fuel lines to prevent vapor lock
  • Or use on any cable, hose, or line for added heat protection
  • 5/8” (16 mm) interior diameter x 36”; easily cuts to size
  • Split design with adhesive flap
Design Engineering Inc Vapor Block Fuel Line Sleeve 010669

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FiTech: 2020 Spring Break Rebate on Qualifying Parts—No Quantity Limit!

David Ayers Leave a comment
Use This Post Clip for Email

Offer valid March 23 to April 30. Click image for printable form and complete details!

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: 4” Lift Kits for ‘07-’20 GM 1500 4WD

David Ayers Leave a comment
Use This Post Clip for Email

Elevate your Chevrolet Silverado or GMC Sierra 4×4 with a 4” suspension lift kit from Belltech. Three new precisely engineered kits (150212SP for 2019–2020 models, 150200SP for 2016–2018 Ext/Crew Cab models, and 150207SP for 2007–2016 Ext/Crew Cab models) include custom-designed, front-height adjustable Street Performance struts and rear Street Performance Twin Tube shocks. These Belltech kits not only improve your ride quality but also retain factory alignment specifications and adjustment cams.

Unlike with most lift kits, these Belltech packages prioritize front-end steering geometry to avoid sacrificing the factory turning radius. As always, Belltech also delivers quality parts, including heavy-duty black-zinc hardware and 1/4” thick steel brackets. Finally, these kits are designed for an easy installation: they are direct bolt-on solutions that require no cutting or welding.

Features

  • For 2007–2020 Chevy Silverado and GMC Sierra 1500 4WD trucks
  • Provides 4” of lift
  • Custom-designed, front-height adjustable Street Performance struts
  • Rear Street Performance Twin Tube shocks
  • Retains factory turning radius
  • Heavy-duty black-zinc hardware
  • Easy, bolt-on, no-drill, no-weld installation
  • Warranty: lifetime
Belltech 4 Inch Lift Kits for 07-20 GM 1500 4WD

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter: Scosche MagicMount™ Universal Mobile Device Mounts

David Ayers Leave a comment
Use This Post Clip for Email

With mobile devices living up to their name, safe and convenient in-cab mounting solutions have become increasingly important. Enter AutoMeter, which has thrown down the gauntlet to the rest of the category with its MagicMount™ Pro Dashes, produced in partnership with Scosche. Safety mounting your AutoMeter DashLink-equipped mobile device to the top of your dash, steering column, or other interior surface, these accessories provide easier viewing and hands-free operation thanks to their Neodymium magnets, which are powerful enough to endure the bumpiest roads and spirited driving maneuvers.

To secure your device, just hover it over the mounting surface to instantly lock it into place. The versatile design allows for multiple viewing angles, while interchangeable trims and two mounting-plate sizes enable visual and functional customization. Three models are available:

  • 5325: Scosche MagicMount™ Dash Mount
  • 5326: Scosche MagicMount™ Vent Mount
  • 5327: Scosche MagicMount™ Dash/Window Mount

Note: The strong magnetic fields are safe for use with mobile devices but WILL damage hard drive devices.

Features

  • Award-winning Scosche MagicMount™ design
  • Securely and conveniently holds your DashLink-equipped mobile device
  • Attaches to surface via automotive-grade adhesive
  • Mount to your dash, steering column, or other interior surface
  • Touch-and-lock mounting via Neodymium magnets
  • Interchangeable trims and two sizes of mounting plate
  • Compatible with a wide variety of phones and tablets
  • Resists shock and vibration
AutoMeter Scosche MagicMount Dash Mount 5325

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Redhorse Performance (4155-10-2): -10 Dry Break Quick-Release Adapter

David Ayers Leave a comment
Use This Post Clip for Email

Installing inline of your AN assembly, dry break quick-release adapters from Redhorse Performance are a great way to achieve fast, spill-free AN assembly disconnects. Simply push in both ends and follow the precut channel to separate the adapter—no spills, no mess. Plus, you won’t need any tools to disconnect the fitting once installed. Consider adding a 4155-10-2 dry break quick-release adapter from Redhorse to your fuel, transmission, or coolant system.

Features

  • Provides a fast, spill-free AN assembly disconnect
  • Installs inline of your AN assembly
  • Push in both ends and follow the precut channel to separate the adapter
  • No tools needed to disconnect the fitting once installed
  • Great for fuel, transmission, and coolant systems
Redhorse Performance -10 Dry Break Quick Release Adapter 4155-10-2

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.