Category: News

K&N (57-2594): 57 Series Performance Air Intake System for ’15-’17 Ford Mustang 3.7L

David Ayers Leave a comment
Use This Post Clip for Email

Street-legal in all 50 states (CARB EO D-269-65), the 57-2594 performance air intake system from K&N increases the volume of airflow to the engine of your 2015–2017 Ford Mustang 3.7L (all models). Comes with a washable, reusable K&N High-Flow Air Filter™ with oiled cotton filter media that lets you go up to 100,000 miles between filter services under normal highway driving conditions, and a custom heat shield that helps protect intake air from the high temperature of your engine bay. Typical install time is less than 90 minutes.

Features

  • 57 Series air intake system for 2015–2017 Ford Mustang 3.7L (all models)
  • Guaranteed to increase horsepower and torque through high airflow and exceptional filtration
  • Will not void vehicle warranty
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Replaces factory air filter and intake tube
  • Filter requires cleaning only every 100,000 miles under normal highway driving conditions.
  • Installation time: <90 minutes with simple hand tools
  • Warranty: 10 years/Million Mile Limited Warranty™
K&N 57 Series Performance Air Intake for Ford Mustang 57-2594

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SCT: “Sleigh Your Holiday” Event Gets You Up to $50 Back on Select Tuners

David Ayers Leave a comment
Use This Post Clip for Email

Offer good November 1 to December 31. Click image for printable form and complete details!

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Bully Dog: “Sleigh the Holiday” Event Gets You Up to $50 Back on Select Tuners

David Ayers Leave a comment
Use This Post Clip for Email

Offer good November 1 to December 31. Click image for printable form and complete details!

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (67419): Tactical-Style Timing Light

David Ayers Leave a comment
Use This Post Clip for Email

Minimize the challenges of setting your vehicle’s ignition timing with this tactical-style timing light from PROFORM. The 67419 timing light doubles as an illuminating all-purpose flashlight. Features a rechargeable lithium-ion battery, machined billet aluminum body, and black anodized finish. Compatible with 2-, 4-, 6-, and 8-cylinder applications. Includes USB charging cable.

Features

  • Billet aluminum housing with black anodized finish
  • High-intensity LED works well even in sunlight.
  • Powered by a rechargeable lithium-ion battery
  • One-wire inductive lead
PROFORM Tactical-Style Timing Light 67419

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Speedmaster: Shootout Series Satin Carbureted Intake Manifold with 4500 Base for Chevy GM LS1/2/6

David Ayers Leave a comment
Use This Post Clip for Email

The PCE147.1130 Shootout Series carbureted intake manifold from Speedmaster features a single-plane aluminum intake and a natural finish. For Chevy GM LS1, LS2, and LS6 applications.

Features

  • For Chevy GM LS1, LS2, and LS6 applications
  • Shootout Series carbureted intake manifold
  • 4500 base and single-plane aluminum intake
  • Natural finish
  • Sold individually
Speedmaster Shootout Carburated Intake Manifold 4500 Base for Chevy GM LS1_2_6 PCE147.1130

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (SA55): “Chevrolet Small-Block Parts Interchange Manual” (Revised Edition)

David Ayers Leave a comment
Use This Post Clip for Email

Written by Chevy expert and author Ed Staffel, the revised Chevrolet Small-Block Parts Interchange Manual from SA Design is an up-to-date exploration of the best factory and aftermarket parts combinations available for your Chevy small-block (265–400 Gen I and II engines).

Readers will learn detailed information about cranks, rods, pistons, cylinder heads, exhaust and intake manifolds, ignitions, carburetors, and more. Additional information covers which parts can be combined to create various displacements, which match well with others, and when to use factory vs. aftermarket. Plus, to help builders discover hidden gems at salvage yards, swap meets, and online, the book includes casting and serial number identification guides.

If you want to ace your next small-block Chevy project—especially if you’re on a budget—the revised Chevrolet Small-Block Parts Interchange Manual from SA Design is an indispensable resource.

Pages: 144
Size: 8.5” x 11”
Format: Paperback
Illustrations: 270 color photos

Chevrolet Small-Block Parts Interchange Manual Revised Edition SA55

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce: TRIAD DS Series 8.75” Triple Disc Clutch

David Ayers Leave a comment
Use This Post Clip for Email

Designed specifically for vehicles requiring a holding capacity of 500–1,100 ft-lb of torque at the crank, TRIAD DS Series triple disc clutches from Centerforce offer superior clamp load and the company’s patented ball bearing–actuated pressure plate (where applicable) for light pedal effort.

The race-inspired Centerforce TRIAD clutch is equipped with organic full-facing material and a lightened billet steel flywheel for low inertia and quicker RPMs. Available in sprung or solid hub, with a 8.75” diameter designed to lower inertia for track-heavy use. Components made in the USA. Match balanced and ready for installation.

Note: Because of the TRIAD’s aggressive nature, some floater noise may be heard during operation.

Features

  • 8.75” diameter lowers inertia for track-heavy use.
  • 500–1,100 ft-lb torque at the flywheel
  • No complicated setup or adjustments
  • Centrifugally assisted diaphragm increases holding capacity with RPM.
  • Patented multi-disc floating disc and drive disc
  • Patented ball bearing pressure plate and positive drive floater
  • Precision balanced for excellent driver control
  • Includes ARP fasteners and specification card
Centerforce Triad DS Series Triple Disc Clutch

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR1063): 2-Gauge Battery Relocation Kit

David Ayers Leave a comment
Use This Post Clip for Email

The new FR1063 battery relocation kit from Flaming River comes with a 20-foot 2-gauge positive cable and an 8-foot 2-gauge ground cable, both flexible, soft, and easy to work with. They are rated for 250 amps and have ultra-fine 100% copper conductor strands for low resistance and flexibility. Special braiding and a soft jacket make these cables extra flexible and easy to use, while heavy-duty copper ends simplify the installation process. Flaming River has included all hardware required for installation.

Features

  • 50% lighter than standard 2-gauge cables
  • 100% copper conductor strands for low resistance and flexibility
  • Rated for 250 amps
  • Special braiding and a soft jacket for easy-to-use flexibility
  • All necessary hardware included
Flaming River 2 Gauge Battery Relocation Kit FR1063

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

CarTech (SA371): “Muscle Car Brake Upgrades: How to Design, Select, and Install”

David Ayers Leave a comment
Use This Post Clip for Email

Written by Street Rod Authority Editor-in-Chief Bobby Kimbrough, Muscle Car Brake Upgrades: How to Design, Select, and Install from CarTech takes a focused look at brake systems for classic muscle cars. SA371 guides builders using thorough, step-by-step instructions for installing stoppage systems on popular applications from Ford, Chrysler, and General Motors.

In his exploration, Kimbrough covers the fundamentals of system design, operation, component function, and equipment selection, from individual components to kits. Readers will learn about master cylinders, steel-braided brake lines, calipers, rotors, proportioning valves, and how to achieve dramatically increased performance and safety from their new systems.

Pages: 144
Size: 8.5” x 11”
Format: Paperback
Illustrations: 332 color photos

CarTech Muscle Car Upgrades How to Design, Select, and Install SA371

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor Cable Products: Vertex Z6 CD Ignition Box

David Ayers Leave a comment
Use This Post Clip for Email

Available in a variety of housings and colors, including powder-coated cast aluminum, polished billet, and anodized billet, the Vertex Z6 CD ignition box from Taylor Cable Products is a study in performance, looks, and reliability. Its rotary dial rev limiter is adjustable in 100-rpm increments (2,000–9,900 rpm), and it boasts a sealed cover to keep out water and debris. Current-overload protection automatically shuts off the box if a problem is detected with the coil, circumstances that can cause lesser boxes to overheat and die.

The Taylor Vertex Z6 CD ignition box will multi-spark up to 3,000 rpm for easier starting and a smoother idle, while the sealed wiring connector makes installation easy. The box comes with a complete hardware kit and harnesses to fit most applications.

Features

  • Works with 4-, 6-, and 8-cylinder engines
  • Maximum operating rpm: 9,900
  • Current-overload shutdown protects the ignition from coil failure.
  • Reverse polarity protection
  • LED indicator flashes for system errors
  • Includes all hardware and a Taylor-manufactured wire harness with a sealed locking connector
  • Size: 8” x 4” x 2“
  • Volt operation: 10–14.5
  • Spark energy: 150 mJ
  • Current draw: 0.75 amps/1,000 rpm
  • Output voltage: 550 primary/47,000 secondary
  • Available materials: cast aluminum, polished billet aluminum, and anodized aluminum
  • Available colors: red, polished, and black
  • Made in the USA
  • Warranty: 1 year
Taylor Cable Products Vertex Z6 CD Ignition Box 401003

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.