Category: News

NOS: Sniper Carbureted Nitrous Plate Kits (+250 HP)

David Ayers Leave a comment
Use This Post Clip for Email

The value-packed line of Sniper nitrous kits from NOS has some new additions, these providing up to an additional 250 HP in a low-cost single nitrous plate for the following popular carburetors:

  • Holley 4150 (square flange): PN 07002NOS
  • 4500 (Dominator): PN 07003NOS
  • Spread bore (quadra jet): PN 07007NOS

These single-stage wet kits provide everything you need to add extra power to your engine, including a 10 lb. Sniper orange nitrous bottle, 14 feet of -4AN feed line, a stainless bar nitrous plate, the new large-body Sniper solenoids, all necessary hardware, and nitrous and fuel jetting for power levels of 150, 175, 200, and 250 HP (additional jets available).

Features

  • Budget-friendly and easy to install.
  • Up to 250 additional horsepower.
  • Large nitrous and fuel solenoids.
  • Included jetting for 150, 175, 200 & 250 HP.
  • All required hardware included.

NOS Sniper Carbureted Nitrous Plate Kits 250 HP

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products Extreme Environment Gauge 9261

AutoMeter Products: Extreme Environment Gauges

David Ayers Leave a comment
Use This Post Clip for Email

Designed to make it through the harshest elements unscathed, the new Extreme Environment series of gauges from AutoMeter Products provides the very best defense against water, dirt, and temperature in exposed cockpits thanks to a sealed front and rear design.

Available Extreme Environment Gauges

  • 9261: Fuel Pressure
  • 9253: Oil Pressure
  • 9255: Water Temperature
  • 9240: Oil Temperature

AutoMeter Products Extreme Environment Gauge 9261

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Motive Gear (V888410): 4.10 Ratio Differential Ring and Pinion

David Ayers Leave a comment
Use This Post Clip for Email

Made from first-run steel (never recycled metal), ring and pinions from Motive Gear are perfect for dedicated racing or off-road vehicles, as they are able to handle the extreme torque generated by high-horsepower engines. These products benefit from extensive engineering, computer-controlled heat treatment, superior strength, and stringent quality-control processes conducted in Motive Gear’s in-house lab.

The V888410 4.1 ratio differential ring and pinion is designed for Chevrolet Corvette C7 applications and is backed by a 2-year/100,000 mile warranty.

Features

  • Fits: 2014–2017 Chevy Corvette C7.
  • Gear ratio: 4.1.
  • Construction: 8620 steel.
  • Ring gear rotation: standard.
  • Warranty: 2 years or 100,000 miles.

Motive Gear 4.1 Differential Ring and Pinion for Corvette

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N: $25 Back on Any Intake System

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

KN 25 Dollars Back on Intake System

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: $25 Back on Any Intake System

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

AIRAID Summer Sale 25 Dollars Back on Any Intake

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N: $10 Back on Any Cabin Filter

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

KN 10 Back on Cabin Filter

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Spectre Performance: $15 Back on Any Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

Spectre Performance 15 Dollars Back on Any Intake

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AEM: $25 Back on Any Intake System

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

AEM 25 Dollars Back on Intake System

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PACE: Your Parts Pro WD’s New B2B Ordering Website!

David Ayers Leave a comment
Use This Post Clip for Email

Parts Pro’s parent company, The AAM Group™, recently began rolling out its new PACE B2B website to select Parts Pro™ member warehouses. If you’re among the lucky retailers and installers who buy from a WD offering PACE, you’ll have access to exciting new search, ordering, and customer-presentation capabilities that will take your buying and selling to the next level!

Powerful Search

The first feature you’ll want to know about is PACE’s powerful year/make/model lookup, which lets you find the application-specific part you need in just seconds. You can also search by category, brand, series, and part number, with auto-completing fields that help you narrow down the options.

Orders Up!

PACE makes ordering from your Parts Pro™ WD easier than ever, with inventory and cost checks; direct-to-WD order submissions; single or batched orders (to meet any minimum freight requirements); and the ability to write special notes, search past orders, export and print order reports, and much more!

Retail Friendly

PACE’s exclusive Retail Mode strips pricing so you can make product presentations to customers without showing them what’s behind the curtain, while the Price Manager tool lets you create on-the-fly custom quotes that adjust dynamically as you change numbers for margin dollars/percentage, time to complete job, and other variables; it will even show you competitive pricing and exchange-rate information! PACE also includes resources such as videos, warranties, installation instructions, and rebates/offers you can use to close more sales without ever leaving the system.

Mobile Ready

When you’re on the move, PACE works perfectly on your smartphone or tablet, so you’ll always be ready to do business—even when you aren’t behind the counter or in the shop!

Get Going!

Interested in learning more about how you can start using PACE? Contact your Parts Pro™ warehouse today to find out when their system will be going live!

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley (223-02): iNTECH Cold Air Intake for ’10-’15 Camaro 6.2L V8

David Ayers Leave a comment
Use This Post Clip for Email

Shipping July 7, the patent-pending 223-02 iNTECH cold air intake from Holley represents the highest level of technology, style, and performance for your 2010–2015 Chevy Camaro (5th generation) 6.2L V8. Dyno tests saw increases of 19.04 HP and 16.55 ft. lb. of torque with a broad power curve.  iNTECH sealed intakes feature a unique Slip-Seal housing–filter tube interface that eliminates the use of clamps and adapters to achieve a seamless installation, while the four-layer dry air filter eliminates the use of oils that can damage MAF sensors and trigger check engine lights.

Holley designed the housing to match your Camaro’s engine compartment, including retaining factory mounting locations to enable a simple installation.

Features

  • For 2010–2015 Chevy Camaro 6.2L V8.
  • +19.04 horsepower and +16.55 foot-pounds’ torque in dyno tests.
  • Slip-Seal interface eliminates the use of hose clamps and adapters.
  • One-piece, fully sealed intake housing design guarantees a true fresh-air intake charge.
  • Factory mounting locations allow for a simple, secure installation.
  • High-flow, washable, reusable 4-layer dry performance air filter.
  • Inner and outer aluminum mesh air filter media prevents filter deformation and rust.
  • Bellows-style silicone coupler at throttle body accommodates nitrous plates or throttle body spacers without cutting the tube.
  • Enhances the look of your engine bay with a stealthy appearance.
  • Stainless steel T-bolt clamps for maximum clamping force and durability.

Holley iNTECH Cold Air Intake for Camaro 223-02

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.