Tag: chevrolet

Hurst (6350029): Dual-Mode Axle-Back Exhaust for ’16-’17 Camaro SS 6.2L with NPP Quad Tip

David Ayers Leave a comment
Use This Post Clip for Email

This new Elite Series axle-back exhaust system for the 2016–2017 Camaro SS with 6.2L V8 from Hurst gives you real sound options: either powerful, aggressive sound in Track mode or a mellow tone in Stealth mode. It’s specifically engineered to fit both coupe and convertible models with the factory NPP option (identified by quad tips) and features tandem Delta 40 and Outlaw mufflers and 4” polished stainless steel tips.

Made in America from 409S stainless steel, the Hurst 6350029 includes all necessary parts and installation hardware.

Note: Though the system itself clamps on, the OE system will require cutting to remove the factory mufflers.

Features

  • For 2016–2017 Chevy Camaro SS 6.2L V8 with NPP quad tips.
  • Dual-mode operation: Track and Stealth.
  • Functional exhaust valves work with OE actuator motors to select between sound levels.
  • Stainless steel construction.
  • Dyno tuned for maximum performance.
  • Made in the USA.

Hurst Dual-Mode Axle-Back Exhaust for Camaro 6350029

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM: Chevy Bowtie Differential Rear End Covers

David Ayers Leave a comment
Use This Post Clip for Email

Available in three different part numbers, the new Chevy bowtie rear differential covers from PROFORM ramp up performance in addition to providing outstanding good looks with their crinkled black finish. Made from CNC-milled, reinforced aluminum, these covers are designed to strengthen your rear housing in heavy torque situations. PROFORM includes two bolts to stabilize bearing main caps, magnetic drain and fluid capacity plugs, and Grade 8 mounting bolts.

Three part numbers are currently available: 141-695 (7.5 GM, 10-bolt), 141-696 (8.2/8.5 GM, 10-bolt), and 141-697 (GM, 12-bolt, passenger car).

Features

  • Made from CNC-milled aluminum.
  • Stiffens main cap area for housing flex reduction.
  • Increases gear life and decreases ring deflection.
  • Includes main cap stabilizing bolts, fluid capacity and magnetic drain plugs, and additional mounting hardware.
  • Two 10-bolt and one 12-bolt applications available.

PROFORM Chevy Bowtie Differential Rear End Covers 141-695

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (999SP): Lowering Kit for ’15-’16 Chevrolet Colorado/Canyon Ext/Crew Cab Short Bed 2WD

David Ayers Leave a comment
Use This Post Clip for Email

Designed to lower your truck +1” to -3” in the front and 4” in the rear, this all-new lowering kit with street-performance shocks from Belltech is just what you need to give your 2015–2016 Chevy Colorado or Canyon a low, aggressive stance. With all components required to properly lower your vehicle (including flip kit), this Stage 3 kit fits 2WD Extended/Crew Cab short bed Canyon/Colorado of the specified years.

Features

  • Fits 2015–2016 Chevrolet Colorado/Canyon (Ext/Crew Cab short bed 2WD).
  • Stage 3 complete solution.
  • +1” to -3” F / 4” R.
  • Street-performance shocks.

Belltech Lowering Kit for Colorado and Canyon

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Spectre Performance (900235): Air Intake Kit for ’67-’69 Camaro LS Swap

David Ayers Leave a comment
Use This Post Clip for Email

Dropping an LS engine into a 1967–1969 Chevy Camaro ranks among the most popular of today’s upgrades. To facilitate the swap, Spectre Performance offers an air intake system specially built for the classic muscle car’s engine bay and fender area that complements an LS engine and blade-style mass air flow sensor.

The 900235 puts the air filter on the passenger side of the engine compartment and includes a heat shield that attaches using existing mounting points. This air intake comes with a red Spectre Performance air filter.

Features

  • For 1967–1969 Chevrolet Camaro.
  • For use with a blade-style mass air flow sensor.
  • Polished aluminum finish.
  • Passenger side air filter position.
  • Red Spectre Performance air filter included.
  • Increases power and torque.

Spectre Performance Air Filter Kit for Camaro LS Swap 900235

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M (71506): Cast-Aluminum Differential Cover for Silverado/Sierra 1500

David Ayers Leave a comment
Use This Post Clip for Email

The 71506 cast-aluminum differential cover for AAM 9.5 and 9.76 differentials from B&M strengthens the differential by preventing case distortion and ring gear / bearing cap deflection. Thanks to their military-grade (MIL-A-8625), black-anodized A356.0-T6 aluminum base, these rugged covers significantly increase fluid capacity and quickly dissipate heat to prolong the life of your ring and pinion gears.

You’ll also find an engraved B&M logo, drain and fill port locations, a magnetic drain plug for catching ferrous metal particles, complete hardware, and installation instructions. B&M backs this cover with a Lifetime Limited Warranty.

Features

  • A356.0-T6 aluminum construction.
  • Engraved B&M logo.
  • Additional fluid capacity.
  • Fill and magnetic drain plugs to simplify servicing.
  • Lifetime Limited Warranty.

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: MXP Cold Air Intake for ’12-’15 Supercharged Chevy Camaro ZL1

David Ayers Leave a comment
Use This Post Clip for Email

The MXP series cold air intake for 2012–2015 supercharged Chevrolet Camaro ZL1 with 6.2 liter engine from AIRAID features a large, one-piece, roto-molded air box that uses the OEM scoop, a massive 4.25” induction tube with billet aluminum MAF housing, premium AIRAID SynthaMax non-oiled air filter, and complete high-grade hardware. This product requires the use of aftermarket tuning due its low-restriction design, which funnels more oxygen-rich air into the engine.

Three color options are available: 251-308 (red filter), 252-308 (black filter), and 253-308 (blue filter).

Features

  • 25” induction tube with billet aluminum MAF housing.
  • Aftermarket tuning required.
  • Replaces stock intake tubing, air filter, and air box.
  • Three air filter colors: red, black, and blue.
  • Backed by AIRAID’s lifetime “no-hassle” warranty!

AIRAID MXP Cold Air Intake for Supercharged Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ARP (234-4344): ARP2000 Head Stud Kit for Chevrolet LS (2003 & Earlier)

David Ayers Leave a comment
Use This Post Clip for Email

Pro Series ARP2000 head studs for Chevy LS (2003 and earlier) from ARP, centerless ground and heat treated before thread rolling, are designed to maximize reliability and strength, with nominally rated 220K psi tensile strength.

The 234-4344 kit includes a set of twenty M11 head studs, ten M8 studs, thirty parallel-ground washers, thirty 8740 chrome-moly 12-point nuts, and ARP’s own Ultra-Torque fastener assembly lubricant.

Features

  • For 2003-and-earlier Chevy LS engines.
  • Built for strength and longevity.
  • Centerless ground and heat treated.
  • 220,000 psi tensile strength rating.

ARP (234-4344): ARP2000 Head Stud Kit for Chevrolet LS (2003 & Earlier)

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Silicone Radiator Hose Kit for 2016+ Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

Shipping this month, this silicone radiator hose kit for 2016-and-up Chevy Camaro SS Coupe from Mishimoto is made from high-grade silicone and heat-resistant embedded fibers to endure temperatures reaching 330 degrees Fahrenheit.

The kit (PN MMHOSE-CAM8-16) includes both upper and lower radiator hoses (and worm-gear clamps) and achieves many benefits for your cooling system, including efficiently reducing heat while simultaneously increasing pressure tolerance. This product is available in Black, Blue, or Red and is backed by Mishimoto’s lifetime warranty.

Features

  • Direct fit for the 2016 Chevrolet Camaro SS coupe.
  • Includes both upper and lower radiator hoses.
  • Max temperature of 330° F.
  • Made of high-grade silicone and heat-resistant embedded fibers.
  • Efficiently reduces heat and increases pressure tolerance.
  • Includes high-quality worm-gear clamps for easy installation.
  • Available in black, blue, or red.
  • Mishimoto Lifetime Warranty.

Mishimoto: Silicone Radiator Hose Kit for 2016+ Camaro SS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

KW Suspensions (35261817): Clubsport Kit for 2010+ Camaro

David Ayers Leave a comment
Use This Post Clip for Email

The Clubsport Kit with coilovers for 2010-and-up Chevrolet Camaro from KW Suspensions is designed for Nordschleife builds using track day tires. Using optional adjustable top mounts, 35261817  allows you to adjust suspension geometry to specific tire requirements and the intended use.

Independently adjustable rebound and compression dampening technology enables individual set-up adjustments according to vehicle load, tire characteristics, and varying track conditions. KW Suspensions engineered this Clubsport Kit to meet all your needs for road and track—enhancing handling, agility, and lap times.

Features

  • For 2010+ Chevy Camaro.
  • Adjustable top mounts.
  • Independently adjustable rebound and compression dampening.

KW Suspensions (35261817): Clubsport Kit for 2010+ Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR319KT): Power Rack and Pinion Conversion System for ’67-’72 Chevy C10

David Ayers Leave a comment
Use This Post Clip for Email

Flaming River has designed a direct-fit power rack and pinion conversion system for 1967–1972 Chevrolet C10 pickups. The cradle mounting assembly bolts into the original mounting locations of the steering box and idler arm assembly, so there’s no cutting, drilling, or welding required for installation.

The FR319KT kit includes a paintable shift tilt steering column with GM 4.25” wiring connector, mounting hardware, universal joints and shafts, rack and pinion cradle system, power steering pump and pulley, billet swivel floor mount, and an aluminum mounting reservoir (hoses sold separately).

Features

  • Solid-plate 3/8” steel mounting cradle for increased strength.
  • New rack and pinion eliminates worn-out steering box and linkage.
  • Increased strength thanks to the 0.98-inch rack shaft.
  • Billet servo valve for cooler operation.
  • Paintable floor shift tilt steering column (column shift also available).
  • Lifetime serviceability and tested/certified by Flaming River.
  • Made in the America.

Flaming River (FR319KT): Power Rack and Pinion Conversion System for ’67-’72 Chevy C10

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.