Tag: jeep

Hypertech (730129): In-Line Speedometer Calibrator Module for 2021 GM Trucks

John Arnaud Leave a comment
Use This Post Clip for Email

Compatible with many 2021 year trucks, eight new speedometer calibration products have just rolled out from Hypertech. The 730129 in-line module, designed for 2021 GM 1500/2500/3500 and Colorado/Canyon, corrects speedometer readings with larger tires installed (up to 54”). This fully plug-and-play product easily connects above the driver’s kick panel in less than 5 minutes, and the module can be tucked out of the way while remaining accessible for recalibration down the road.

Other Hypertech modules are available for the following 2021 trucks: Ford F-150/-250/-350 (PN 730125), Ford Ranger (PN 3300), Toyota Tacoma (PN 730123), Toyota Tundra (PN 730119), Nissan Titan (PN 730126), Ram 1500/2500/3500 (PN 730133), and Jeep Wrangler/Gladiator (PN 3400).

Features

  • For 2021 GM 1500/2500/3500 and Colorado/Canyon
  • Corrects speedometer readings with up to 54” tires installed
  • Plug-and-play installation above driver’s kick panel
  • Installs in less than 5 minutes
  • Remains accessible for later recalibration
  • Other modules available for Ford, Toyota, Nissan, Ram, and Jeep

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Energy Suspension (2.4114R): Body Mount Set for ’18–’20 Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

When it comes to your vehicle’s body mounts, it’s hard to find a good middle ground. Original rubber mounts can crack, distort, and crush until they literally fall off. Aluminum mounts can be too harsh for street use and can break/cause other components to break as well. Energy Suspension solved this issue with its Hyper-Flex™ polyurethane cab and body mounts, which are soft enough for a smooth ride yet rugged enough for demanding roads, trails, and tracks. These body mounts help to maintain your vehicle’s body alignment.

The 2.4114R Energy Suspension set fits 2018–2020 Jeep Wrangler JL.

Features

  • For 2018–2020 Jeep Wrangler JL
  • Hyper-Flex™ polyurethane is soft, flexible, and rugged
  • Replaces distorted and worn-out original mounts
  • Helps maintain car body and truck cab-to-bed alignment
Energy Suspension Body Mount Set for Jeep JL 2.4114R

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: Trail Performance Shocks for Jeep Wrangler

John Arnaud Leave a comment
Use This Post Clip for Email

Belltech has added to its Trail Performance line to include premium ride-quality shocks for 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL. Tuning and low-speed compression characteristics were a top priority here, leading to advanced control of pitch and roll, dive and squat to keep trail blazers confident and in control.

Belltech included two-way, independent adjustable technology in the form of 18 clicks of rebound tuning and 12 clicks of compression damping, letting drivers alter the Trail Performance shocks to perform at the highest expectancy on any terrain. The setup especially complements large, aggressive, off-road tires, maintaining a smooth, stable, in-control ride.

Available rear and front for 0”–2.5” and 4” lifts for JK and JL.

Features

  • For 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL
  • Premium ride quality
  • Advanced control of pitch and roll, dive and squat
  • Two-way, independent adjustable technology
  • +/- 18 clicks rebound adjustment
  • +/- 12 clicks compression adjustment
  • Perfect for large, aggressive, off-road tires
Belltech Performance Trail Shocks for Jeep Wrangler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce (KDF157077): Dual Friction® Clutch and Flywheel Kit for 2020 Jeep Gladiator

John Arnaud Leave a comment
Use This Post Clip for Email

Designed for the 2020 Gladiator, this Centerforce Dual Friction® clutch and flywheel kit is perfect for off-road enthusiasts who want the ultimate performance clutch for on- and off-road use. The KDF157077 set leverages the Centerforce centrifugal weight system and specialized machining processes to provide outstanding holding capacity and exceptional street characteristics—without sacrificing pedal effort. The high-inertia billet steel flywheel helps the engine maintain RPMs in rough terrain.

Features

  • For 2020 Jeep Gladiator
  • Ultimate performance clutch for on- and off-road use
  • Centrifugal weight system and specialized machining processes
  • Outstanding holding capacity and exceptional street characteristics
  • Won’t sacrifice pedal effort
  • High-inertia billet steel flywheel helps engine maintain RPMs in rough terrain
Centerforce Dual-Friction Clutch and Flywheel Kit KDF157077

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc.: Boom Mat Sound-Deadening Headliner Kits for Jeep Gladiator

John Arnaud Leave a comment
Use This Post Clip for Email

Design Engineering, Inc. Boom Mat headliners offer a custom-fit noise solution for Jeep Gladiator hard tops. Available in Black and Gray leather-look and Black, Gray, and White original finish, DEI headliners install easily and greatly reduce noise, block heat from the sun, and insulate your interior to improve interior climate-control performance. Enjoy a 3–4 dB reduction in noise levels for easier in-cabin conversations and better music enjoyment!

Providing an instant dress-up element in addition to tangible noise, heat, and vibration reduction, preshaped DEI headliners apply easily via their peel-and-stick design.

Features

  • For Jeep Gladiator
  • Made from open-cell polyurethane foam with polymer surface treatment
  • Install easily to block noise and temperature
  • Improve cabin acoustics (3–4 dB of reduced interior noise)
  • Available in five different finishes
DEI Boom Mat Headliner for Jeep Gladiator

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hypertech (752504): Speedometer Calibrator for 2019 Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

Hypertech’s Speedometer Calibrator for 2019 Jeep Wrangler JL corrects the speedometer for larger-than-stock tires (24–40”). This product is a great value for drivers who desire only recalibration functions without more advanced tuning features.

Simply plug the device into your Jeep’s under-dash connector and select the new tire height. In a matter of minutes, your JL’s computer will be reprogrammed for accurate readings. Also reads, displays, and clears diagnostic trouble codes (DTCs).

Note: Not legal for sale or use in California.

  • For 2019 Jeep Wrangler JL.
  • Calibrate your speedometer for nonstock tires.
  • Read and clear diagnostic trouble codes (DTCs).
  • Not legal for use or sale in California.
Hypertech Speedometer Calibrator for 2019 Jeep Wrangler JL 752504

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Energy Suspension: Rock-Flex Suspension Systems for 2018 Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

Though the Wrangler JL offers many advances over the JK, including a well-designed suspension featuring better geometry, the engineers at Energy Suspension believe strongly in that old saying: “There’s always room for improvement.”

The new Rock-Flex suspension system from Energy Suspension captures that adventurous spirit. Using Hyperflex performance polyurethane, Rock-Flex systems create a ride height–adjustable suspension that gives your JL the articulation, control, and off-road performance of a much more expensive off-road suspension while simultaneously enhancing on-road handling. Rock-Flex is less a replacement suspension and more a series of parts that augment the factory suspension (and overcomes the shortcomings of OE rubber components).

This innovative product addresses all the issues associated with lifting a coil sprung Jeep, correcting sway bar geometry and caster without additional modification—allowing the suspension to function properly through its entire range of motion while improving the JL’s already impressive street manners.

If you’ll be at SEMA, stop by the Energy Suspension booth (#23267) to learn more about this exciting new product.

Features

  • For 2018 Jeep Wrangler JL.
  • Creates a ride height–adjustable suspension.
  • Increased articulation, control, and off- and on-road performance.
  • Corrects sway bar geometry and caster without additional modification.
  • Visit the Energy Suspension booth (#23265) at SEMA to learn more!

Energy Suspension Rock-Flex Suspension System for Jeep Wrangler JL

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley Sniper EFI BBD for Jeep CJ 550-858

Holley (550-858): Sniper EFI BBD for Jeep CJ

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re tired of struggling with your old BBD Jeep carburetor, or your off-road rig leaves you hanging at extreme angles while on the trail, Holley has your solution. The Sniper EFI BBD for Jeep CJ is right at home on any 258ci-powered trail rig or weekend cruiser. Not only does the Sniper EFI BBD offer superior throttle response and WOT power, but you also gain timing control. Put an end to cold start issues, hesitations, vapor lock, and flooding by upgrading to a Sniper EFI BBD from Holley.

Features

  • For 1971–1986 Jeep CJ with 258ci six-cylinder engine.
  • Bolt-on BBD replacement carburetor.
  • Throttle body–mounted ECU (no extra boxes to mount).
  • Supports up to 350 HP with two 100 lb./hr. injectors.
  • Only 4 wiring connections required (battery + and – , switched ignition, and RPM).
  • Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 PSI).
  • Integrated ignition timing control.
  • High-resolution full-color touchscreen.
  • Simple calibration wizard—no laptop required.
  • Self-tuning ECU.
  • Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn.
  • OEM-style TPS/IAC and fuel pressure regulator.
  • Clamp-on oxygen sensor kit for 2.25” exhaust.

Holley Sniper EFI BBD for Jeep CJ 550-858

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite: Extruded Core Radiator for ’07-’18 Jeep Wrangler JK

John Arnaud Leave a comment
Use This Post Clip for Email

Extruded Core Technology from Flex-A-Lite is the future of performance aluminum radiators, replacing multi-core radiators with a new, advanced design. Extruded Core Radiators provide significantly better cooling with a stronger, more durable, and lighter design.

This direct-fit radiator is engineered to bolt into a 2007–2018 Jeep Wrangler JK—no cutting or drilling required. The radiator mounts using the factory location and equipment and includes a 22–24 lb. cap and train petcock.

Features

  • Increased contact area between coolant and aluminum tubes for better heat rejection.
  • Flat surface on which to braze the cooling fins maximizes contact between the tubes and fins for better cooling.
  • Louver patterns in the cooling fins direct airflow for better performance.
  • Wind-tunnel testing has shown significant cooling efficiency over standard tube radiators.
  • Enhanced strength (100 PSI burst rating).
  • Corner subhead reinforces the cooling tube to header connection (an area prone to cracking and leaking in aluminum radiators).
  • Warranty: 2-year transferable.

Flex-A-Lite Extruded Core Radiator for Jeep JK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-1570): Air Intake System for ’14-’15 Jeep Grand Cherokee 3.0L V6 EcoDiesel

John Arnaud Leave a comment
Use This Post Clip for Email

The 3.0L V6 turbo engine in 2014–2015 Jeep Grand Cherokees provides a modest amount of power but is paired with a stock air intake system that may cause unnecessary air turbulence and slow the volume of airflow reaching the engine.

K&N has your answer. The 57-1570 air intake system is engineered to replace the factory air filter and air intake housing. Its free-flowing, roto-molded, high-density polyethylene tube is meticulously designed to be aerodynamic—and when paired with the included oversized conical air filter can increase airflow to your engine by up to 50% (the filter is washable and reusable to boot). You’ll enjoy up to 100,000 miles between cleanings under normal highway driving conditions.

K&N’s 57-1570 system also offers a black powder-coated aluminum heat shield, protecting the air filter and intake air from hot engine bays. The air intake tube funnels airflow directly into the engine’s throttle body for a guaranteed increase in horsepower and torque; in fact, dyno testing of a 2014 Grand Cherokee saw an increase of 12.67 horsepower and 30.94 ft.-lb. of torque.

Features

  • Guaranteed to increase horsepower.
  • Designed to improve throttle response and engine sound.
  • Lasts up to 100,000 miles before service is required (depending on driving conditions).
  • Replaces entire factory air intake system.
  • Free-flowing, high-density polyethylene tube.
  • Washable and reusable lifetime air filter.
  • Installation: < 90 minutes.
  • Warranty: K&N Million Mile Limited.

K&N Air Intake System for 14-15 Jeep Grand Cherokee 57-1570

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.