Tag: off-road

Belltech (15104): 2” Trail Performance Leveling Coilover Kit for ’19–’21 Ford Ranger

David Ayers Leave a comment
Use This Post Clip for Email

For improved ride quality, handling, and off-road chops, the answer is this 2” Trail Performance leveling coilover kit from Belltech. Replacing the shocks and springs on 2019–2021 Ford Ranger (all drives), this height-adjustable product offers nonadjustable preset damping and up to 2” of lift with just the turn of the included spanner wrench. The 15104 kit is a premium, out-of-the-box solution that increases grip and reduces body roll—all while retaining daily driving comfort. Belltech ships this kit preassembled, with matched performance coil springs, bump stops, dust boots, and OEM-style top mounts.

Features

  • For 2019–2021 Ford Ranger (2WD & 4WD)
  • Improves ride quality, handling, and off-road performance
  • Preassembled and height adjustable
  • Up to 2” lift with the turn of the included spanner wrench
  • Out-of-the-box solution is ready to install.
  • Includes matched performance coil springs, bump stops, dust boots, and OEM-style top mounts
Belltech 2 Inch Trail Performance Leveling Coilover Kit for Ford Ranger 15104

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: Trail Performance Shocks for Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

Belltech has added to its Trail Performance line to include premium ride-quality shocks for 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL. Tuning and low-speed compression characteristics were a top priority here, leading to advanced control of pitch and roll, dive and squat to keep trail blazers confident and in control.

Belltech included two-way, independent adjustable technology in the form of 18 clicks of rebound tuning and 12 clicks of compression damping, letting drivers alter the Trail Performance shocks to perform at the highest expectancy on any terrain. The setup especially complements large, aggressive, off-road tires, maintaining a smooth, stable, in-control ride.

Available rear and front for 0”–2.5” and 4” lifts for JK and JL.

Features

  • For 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL
  • Premium ride quality
  • Advanced control of pitch and roll, dive and squat
  • Two-way, independent adjustable technology
  • +/- 18 clicks rebound adjustment
  • +/- 12 clicks compression adjustment
  • Perfect for large, aggressive, off-road tires
Belltech Performance Trail Shocks for Jeep Wrangler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (26015): Trail Performance Struts for ’16-’20 Toyota Tacoma 4WD

David Ayers Leave a comment
Use This Post Clip for Email

Level your 2016–2020 Toyota Tacoma 4WD and amp up its suspension control with Trail Performance Struts from Belltech. With the 26015 kit, you’ll not only enjoy improved performance and safety but also the ability to lift your Tacoma’s ride height up to 2” in half-inch increments—all from the same part!

Thanks to a combination of low-speed compression and rebound characteristics, these Belltech Trail Performance Struts produce a great balance of everyday driving comfort and the spirit to tackle adventurous trails.

Features

  • For 2016–2020 Toyota Tacoma 4WD
  • Patented adjustable struts (from OEM stock to a true 2” lift, in 0.5” increments)
  • Performance sport ride and improved overall handling
  • Progressive rate polymer bumpstop
  • Adjustable packer design to dial in proper bumpstop engagement
  • Reduces body roll, dive, underbraking, and squat under acceleration
  • Retains OEM droop travel
  • Vulcanized OEM-style lower bushing with increased durometer
Belltech Trail Performance Struts for 16-20 Toyota Tacoma 4WD 26015_2
Belltech Trail Performance Struts for 16-20 Toyota Tacoma 4WD 26015

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: 6”-8” Suspension Lift Variations for ’07-’18 GM 1500 4×4

David Ayers Leave a comment
Use This Post Clip for Email

Get the lift and handling your GM 1500 4×4 has been waiting for with a Belltech suspension lift kit. These direct bolt-on kits offer front-height adjustable Trail Performance struts and rear Trail Performance twin-tube shocks, and install with minimal cutting and no welding required. Your 2007–2018 GM pickup will become more capable without sacrificing quality or factory driving performance.

Belltech has given these suspension lift kits a new front crossmember that relocates the pivot points of the lower control arm and retains the proper LCA angle while maintaining maximum ground clearance. Lift spindles correct ball joint working angles and eliminate bumpsteer, while the ride height–adjustable struts and matching rear shocks ensure the correct bump and droop travel for the new height.

Available Parts

  • 2007–2016 GM 1500 4×4: 150201SPS, 150201SP, 150201BK
  • 2016–2018 GM 1500 4×4: 150203SPS, 150203SP, 150203BK

Features

  • For 2007–2018 Chevy Silverado and GMC Sierra 4×4
  • New front crossmember relocates LCA pivot points to retain proper angle.
  • Lift spindles correct ball joint working angles and camber curve.
  • Outer tie rod mounting location minimizes bumpsteer.
  • Custom-valved, ride height–adjustable, twin-tube Trail Performance struts
  • Rear Trail Performance shocks provide correct bump and droop travel for new height.
  • Two-piece front differential drop provides for proper pinion angle, full CV joint articulation, and drive shaft angularity.
  • Quarter-inch, laser-cut steel skid plate protects the front differential.
  • Direct bolt-on installation (minimal cutting and no welding required)
  • Includes step-by-step instructions
Belltech 7-8 Inch Suspension Lift Variants for 07-18 GM 1500 4x4

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce (KDF157077): Dual Friction® Clutch and Flywheel Kit for 2020 Jeep Gladiator

David Ayers Leave a comment
Use This Post Clip for Email

Designed for the 2020 Gladiator, this Centerforce Dual Friction® clutch and flywheel kit is perfect for off-road enthusiasts who want the ultimate performance clutch for on- and off-road use. The KDF157077 set leverages the Centerforce centrifugal weight system and specialized machining processes to provide outstanding holding capacity and exceptional street characteristics—without sacrificing pedal effort. The high-inertia billet steel flywheel helps the engine maintain RPMs in rough terrain.

Features

  • For 2020 Jeep Gladiator
  • Ultimate performance clutch for on- and off-road use
  • Centrifugal weight system and specialized machining processes
  • Outstanding holding capacity and exceptional street characteristics
  • Won’t sacrifice pedal effort
  • High-inertia billet steel flywheel helps engine maintain RPMs in rough terrain
Centerforce Dual-Friction Clutch and Flywheel Kit KDF157077

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD Performance (6471): 6 Offroad Ignition

David Ayers Leave a comment
Use This Post Clip for Email

With its reliable, rugged, fully potted design, the 6 Offroad ignition from MSD Performance provides performance at low and high RPM for a variety of off-the-pavement activities, including rock crawling, desert racing, or other harsh-terrain play.

Below 3,000 RPM, the 6 Offroad delivers a crisp, clean throttle response and complete fuel burn, while over 3,000 RPM its powerful capacitive discharge spark keeps the fire lit until you let off the skinny pedal. The 6471 includes an easy-on-your-engine rev limiter that protects against damage from drivetrain failure or slick spots; an easy-to-read LED display; and rotary dials to adjust rev-limit, cylinder select, and timing start retard.

Features

  • MSD’s smoothest rev limiter yet is easy on your engine.
  • Fully potted design provides reliability in high-vibration and wet circumstances.
  • Large, easy-to-read LED display for rev limit, highest RMP turned, cylinder select, start retard, battery voltage (tach mode available).
  • Simple setup with three rotary dials.
  • Built-in start retard adjustable in 0˚, 10˚, or 20˚
  • Full delivery of spark energy down to 6-volt battery supply.
  • Efficient, low current draw for extended battery life.
  • Single plug-in connector for clean wiring.
  • Compatible with 4-, 6-, and 8-cylinder engines.
  • Reverse polarity and overheat protection.

MSD Performance 6 Offroad Ignition 6471

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mr. Gasket: Fabricated Aluminum Valve Covers

David Ayers Leave a comment
Use This Post Clip for Email

The new fabricated aluminum valve covers from Mr. Gasket are a strong, lightweight choice at an affordable price. Perfect for street, off-road, or racing machines, these valve covers are crafted from 6061 T5 sheet aluminum and precision TIG-welded for a great fit. Mr. Gasket offers two finishes to suit you—natural anodized or black coated—along with various heights to clear most popular rocker arm combinations. All of these covers include mounting hardware for quick and simple installation.

Features

  • Quality TIG-welded 6061 T5 sheet aluminum.
  • 1/8” or 1/4” one-piece CNC billet flange for superior sealing.
  • Your choice of natural anodized or black-coated finish.
  • Covers for most popular GM, Ford, and Chrysler applications.
  • Available with or without breather openings.
  • Tall height available for additional valve train clearance.
  • Includes mounting hardware.
  • Sold as a pair.

Mr. Gasket: Fabricated Aluminum Valve Covers
Mr. Gasket: Fabricated Aluminum Valve Covers

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley (553-107): EFI LED Light Bar

David Ayers Leave a comment
Use This Post Clip for Email

The days of low oil dummy lights are behind you! The new EFI LED Light Bar from Holley will revolutionize the way you think about shift lights and warning indicators. 553-107 features 14 fully programmable LEDs that leverage Holley’s stand-alone digital dash or EFI digital dash, allowing you to set LED color, brightness, and flash rates as well as user-definable warning indicators for a fully customizable experience!

The Holley LED Light Bar keeps your shifts on time and allows you to diagnose any ECU output at a glance—without removing your attention from the pavement ahead.

  • Fully customizable, 10-LED shift light.
  • 4 perimeter LEDs act as user-definable warning lights.
  • 3 programmable RPM ranges.
  • 15 levels of adjustable brightness.
  • Auto brightness or dimming based on ambient light.
  • 10 LED colors to choose from for easy identification.
  • Multiple flash rates.
  • Includes roll-bar and in-dash mounting kits for ease of installation.
  • Works with Holley stand-alone digital dash (553-109) and Holley EFI digital dash (553-106).
  • CAN plug-and-play installation gets going quickly.
  • User-friendly touchscreen interface via dash

Holley (553-107): EFI LED Light Bar
Holley (553-107): EFI LED Light Bar

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

DEI: EXO Series Exhaust and Pipe Wrap

David Ayers Leave a comment
Use This Post Clip for Email

The Design Engineering, Inc. EXO Series™ exhaust wrap is designed for use in extreme environments. Traditional exhaust wraps have not been able to withstand the dirt and water that can accompany off-road, dirt track, desert, and other forms of intense driving. The EXO Series features a dual-layer design that incorporates a combination of high-temperature glass covered with a 304-grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact shielding. What’s more, DEI’s unique Air Gap Technology keeps the glass fiber wrap from directly contacting the hot surface by way of an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe, or exhaust system; this size also makes it perfect for high-impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped, keeping the wrap tight and making installation easy. Delivering outstanding looks and rugged performance over the long haul, this product is available in Black or Tan in either 1.5” x 10’ or 1.5” x 20’ rolls.

EXO Series Exhaust Wrap
EXO Series Exhaust Wrap

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Talking Performance with Painless

David Ayers Leave a comment
Use This Post Clip for Email

By John M. Arnaud

When the candy apple red Camaro pulled into our parking lot last week, we knew Painless Performance had arrived. Company President Adrian Murray and National Sales Manager Derek Love came into town to talk shop, marketing, and the promotion of their exciting new Trail Rocker product line.

This year Painless celebrated its 25th anniversary in the aftermarket industry. The company boasts the number-one-selling chassis harness in addition to a variety of fuel injection management systems and other electrical components. Long known for excellence in the classic car and truck sectors, the company is moving into new territory with the Trail Rocker for Jeep, an in-dash power center that allows off-road adventurers to control up to eight accessories from the safety of a waterproof housing.

Painless Performance Visits Parts Pro
Painless Performance Visits Parts Pro

This week of all weeks, Parts Pro is grateful to count Painless Performance as a valued partner. Thanks for coming down to see us…and here’s to an exciting 2016!

To plug into the latest products from Painless Performance, visit your local Parts Pro retailer. You can find an affiliated store using our dealer locator.

If you are a performance accessories retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Tags: painless performance, trail rocker, chassis harness, efi, off-road, fuel injection, classic car, classic truck

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.