Flex-A-Lite has taken the guesswork out of selecting and mounting the right transmission cooler. This transmission cooler features 23 rows and a patented dimple plate. It’s superior design rejects almost twice the amount of heat compared to typical, low-cost coolers. This gives you far better cooling in the same amount of space. The aluminum bracket is specifically designed to fit 2007-2018 Jeep Wrangler JK vehicles.
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Flex-A-Lite (31970) Transmission Cooler Mounting Bracket Kit for `07-`18 Jeep Wrangler JK (Includes Cooler)
Flex-A-Lite (31970) Transmission Cooler Mounting Bracket Kit for `07-`18 Jeep Wrangler JK (Includes Cooler)
Flex-A-Lite has taken the guesswork out of selecting and mounting the right transmission cooler. This transmission cooler features 23 rows and a patented dimple plate. It’s superior design rejects almost twice the amount of heat compared to ty...
Lower your Chevy Silverado 1500 Crew Cab (`19-`20 RWD) right
the first time. Belltech’s Complete Lowering Kits include all the parts and
pieces you need to achieve not only the look you WANT, but the alignment, performance,
and safety you NEED. Belltech engineers have reviewed the most popular setups
for each Sport Truck or SUV in their application range, and developed the
Belltech Complete Kit Line to simplify your purchase. These complete lowering
kits are your all-in-one-box solution, providing you with all the parts needed to
successfully lower your truck.
Features:
For `19-`20 Chevrolet Silverado 1500 2WD, `19 GMC Sierra 1500 2WD (all cabs, standard bed)
Kit Includes:
Shock Absorber (PN: 2208FF), Lowering Strut (PN: 25019), Drop Spindle Set (PN: 2519), Flip Kit (PN: 6528)
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Belltech (1040SP) Complete Lowering Kit with Street Performance Shocks for `19-`20 Chevrolet Silverado 1500 Crew Cab RWD
Belltech (1040SP) Complete Lowering Kit with Street Performance Shocks for `19-`20 Chevrolet Silverado 1500 Crew Cab RWD
Lower your Chevy Silverado 1500 Crew Cab (`19-`20 RWD) right
the first time. Belltech’s Complete Lowering Kits include all the parts and
pieces you need to achieve not only the look you WANT, but the alignment, performance,
and safety you NEED...
LS engines are among the most popular for swaps because of their low expense and great power potential. Unfortunately, stock LS oil pans do not always fit where you want them to. That’s where TSP’s low-profile, retro-fit oil pan comes in. Composed of lightweight cast aluminum, it is designed to allow for increased clearance to the ground and chassis. It will fit many GM rear-wheel drive applications that are originally equipped with a small block or big block Chevy engine and with a factory rear sump pan.
This oil pan is meticulously designed to mount perfectly to any wet-sump LS engine and it is compatible with the stock oil filter. This pan also features a boss on each side designed for an oil return for turbochargers. Added cut-outs also make this model a great fit with the OEM Ford Fox Body K-Member. It is also ideal for `79-`04 Mustang, `79-`86 Capri, `67-`69 Camaro/Firebird, `82-`92 Nova/Apollo/Ventura/Omega, `64-`72 A-body, `78-`87 G-body, & `82-92 F-body engines.
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Top Street Performance (81075): LS Aluminum Rear Sump Low-Profile Retro-Fit Oil Pan with Added Clearance
Top Street Performance (81075): LS Aluminum Rear Sump Low-Profile Retro-Fit Oil Pan with Added Clearance
LS engines are among the most popular for swaps because of their low expense and great power potential. Unfortunately, stock LS oil pans do not always fit where you want them to. That’s where TSP’s low-profile, retro-fit oil pan ...
The PROFORM Electric Piston Ring Filer is an easy way to accurately grind piston rings and set precise ring gap. You simply take your ring and secure it to the smooth-action fixture, set the micrometer, and then start grinding. Powered by a 6V rechargeable battery or an A/C plugin adapter (both included), this filer offers both maximum speed and affordability. This Piston Ring Filer is constructed from aluminum for durability, and features a red anodized finish that adds style and protection. This model is portable, as well as bench mountable for extra versatility and convenience. It also includes two 120-grit carbide grinding wheels with ¼-inch center holes.
Features:
Accurately grind piston rings & set precise ring gap
Designed for maximum speed
Portable or bench mountable
Aluminum construction for durability
Powered by 6V rechargeable battery or A/C plugin adapter
Red anodized finish for style & protection
Also includes (2) 120-grit carbide grinding wheels, (1) rechargeable battery, & (1) A/C adapter
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
PROFORM (66765): Electric Piston Ring Filer with Dial Indicator
PROFORM (66765): Electric Piston Ring Filer with Dial Indicator
The PROFORM Electric Piston Ring Filer is an easy way to accurately grind piston rings and set precise ring gap. You simply take your ring and secure it to the smooth-action fixture, set the micrometer, and then start grinding. Po...
Protecting your spark plug boots and wires will help prevent burn through, hardening, and cracking. The 4-Cylinder Protect-A-Boot & Wire Kit includes everything needed to protect spark plug boots and wires from harmful, under-hood heat. Plus, they add a professional, finished look to the engine. This kit is made from high-temperature, non-flammable, glass-fiber material that is able to withstand temperatures up to 1,000°F. (There is also a titanium version made from lava rock capable of withstanding up to 1,800°F).
For extra protection, these 6-inch long boot protectors have a double-wall construction with a sewn-in ring. They also have a universal fit to accommodate most straight or angled spark plug boots on any 4-cylinder engine. The shrink tubes feature a water-tight seal for even more protection. This kit includes 13 feet of line sleeving, 12 Hi-Temp shrink boots, and 4 Protect-A-Boot boot protectors. This kit is also available in four different colors to give your engine a polished and customized look.
Features:
Universal fit for all 4-cylinder engines
Compatible with most straight & angled spark-plug boots
Withstands temperatures up to 1,000°F
Made from high-temp, non-flammable glass fiber
Boots feature a double-wall construction
Shrink tubes provide a water-tight seal
Provides a professional, finished look
Includes: (1) 13-ft long line sleeving, (12) Hi-Temp shrink boots, & (4) Protect-A-Boots
Available in (4) different colors: silver, black, red, & blue
Titanium version also available (made of lava rock to withstand up to 1,800°F)
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Design Engineering, Inc. (010584-010588): 4-Cylinder Protect-A-Boot & Wire Kit
Design Engineering, Inc. (010584-010588): 4-Cylinder Protect-A-Boot & Wire Kit
Protecting your spark plug boots and wires will help prevent burn through, hardening, and cracking. The 4-Cylinder Protect-A-Boot & Wire Kit includes everything needed to protect spark plug boots and wires from harmful, under-hood hea...
The all-new Flex-A-Lite Compact Adjustable Electric Fan Controller with Relay Kit provides more customer benefits and higher quality than competing alternatives. This kit comes with everything needed for typical installations, making it one of the most complete kits available at an affordable price. It is rated for use with fans having a continuous amp draw of up to 20 amps. It is ideal for use with almost all single fans, such as the patent-pending Flex-A-Lite Flex-Wave™ and Trimline electric fans, as well as some dual electric-fan systems.
Higher quality is evident in all 12-gauge wires used to power the fan motor and to connect to the battery power source. All wire used in these kits is rated 105C to withstand 221° F. This is more durable and safer to use in hot, under-hood conditions.
Adjusting the fan activation temperature between approximately 160° and 220° Fahrenheit is simple with a small, flat-blade screwdriver. The Compact Adjustable Electric Fan Controller includes optional connections to activate the electric fan whenever the air conditioning is on and for a manual override switch. The control module is potted for water resistance and protection from vibration. It includes a 30-amp relay and inline fuse. All wires are permanently attached to the control module both for secure connections and for quicker installation.
Features:
Rated for fans with continuous amp draw up to 20A
Ideal for almost all single fans
Compact design for convenience
12G wires power fan motor & battery power source
105C rating to withstand 221°F
Fan activation temperature adjusts between 160°F & 220°F
Potted control module for water resistance & vibration protection
Control Module includes a 30-amp relay & inline fuse
Permanently secured connections
All wires are permanently attached
Optional connections activate fan with air condition on or act as manual override switch
Quick, easy installation
PN: 33095 includes a threaded temperature sensor with two adapter bushings to fit 1/4-inch, 3/8-inch, and 1/2-inch NPT threaded ports. Use this kit when there is a threaded port available in the cooling system, such as the thermostat housing, intake manifold, or cylinder head.
PN: 33094 uses a push-in temperature sensor that installs easily by insertion between the radiator fins and tubes. This is ideal for applications that do not have a threaded port available in the coolant system.
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Flex-A-Lite (33094-33095): Compact Adjustable Electric Fan Controller with Relay Kit
Flex-A-Lite (33094-33095): Compact Adjustable Electric Fan Controller with Relay Kit
The all-new Flex-A-Lite Compact Adjustable Electric Fan Controller with Relay Kit provides more customer benefits and higher quality than competing alternatives. This kit comes with everything needed for typical installations, making i...
Color-coded, lightweight, and affordable AN hex wrench set from PROFORM is ideal for tightening valuable aluminum fittings without marring damage. Kit includes eight wrenches.
Features:
8-piece, color-coded set
Includes sizes -3AN through -20AN
Quality aluminum construction
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
PROFORM (66978): Eight-Piece Aluminum AN Wrench Set
PROFORM (66978): Eight-Piece Aluminum AN Wrench Set
Color-coded, lightweight, and affordable AN hex wrench set from PROFORM is ideal for tightening valuable aluminum fittings without marring damage. Kit includes eight wrenches.
Features:
8-piece, color-coded set Includ...
The Watch Dog automatic battery disconnect switch from Flaming River can handle 300 amps of current continuously for both 12V and 24V systems. The product’s “magnetic latch” technology secures On/Off positions without current draw and requires over 80G of force to mechanically separate the contacts.
With IP67 and IP69K International Protection ratings, the Watch Dog resists dust and moisture and offers programmable time-delay settings and a manual emergency toggle switch with LED system status indicator.
The FR1057 kit includes the main battery disconnect switch, emergency toggle switch, four-way wire harness (8.33’), seven-way wire harness (13.25’), and stainless-steel momentary push button (FR1301).
Features:
Simplify shutdown with automatic battery disconnection and programmable time-delay shutdown
Bistable “magnetic latch” technology maintains on and off positions without consuming current
Max continuous current load of 300 amps
Supports 12V and 24V systems out of the box
Durable, dust-proof, and watertight—even against high-pressure water jets
Emergency toggle switch for manual Watch Dog battery disconnect
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Flaming River (FR1057): Watch Dog Automatic Battery Disconnect Safety Switch
Flaming River (FR1057): Watch Dog Automatic Battery Disconnect Safety Switch
The Watch Dog automatic battery disconnect switch from Flaming River can handle 300 amps of current continuously for both 12V and 24V systems. The product’s “magnetic latch” technology secures On/Off positions without current draw and requ...
Keep the flame of adventure lit and dominate the dirt with an Airaid Performance Cold Air Intake System. This air intake system features a CAD-designed intake tube engineered to reduce restriction and accelerate airflow to any `19-`20 Chevy/GMC Silverado/Sierra 1500 4.3L V6 engine. The intake tube is paired with an enclosed air box to help protect the filter and inlet from the heat of the engine bay. This system also includes a washable, reusable, dry SYNTHAMAX® air filter designed to capture contaminants and provide top-quality engine protection. This simple-to-install, sophisticated system helps maintain proper air-to-fuel ratios, and eliminates the need for recalibration after installation. To enjoy your new horsepower gains, just bolt it on and go! Not legal for sale or use on any pollution-controlled vehicle in California.
Features:
Specifically made for `19-`20 Chevy/GMC Silverado/Sierra 1500 4.3L V6 Engines
Replaces the stock air box, air filter, & intake tubing
Dry performance synthetic SYNTHAMAX® air filter can be washed & reused
High-efficient filtration media offers excellent airflow & protection from contaminants
Helps boost horsepower & acceleration
Enclosed air box design protects inlet air from high temperatures
Easy to install with only basic hand tools
No-hassle Limited Lifetime Warranty
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
AIRAID (205-395): Performance Air Intake System for `19-`20 Chevy/GMC Silverado/Sierra 1500 4.3L V6
AIRAID (205-395): Performance Air Intake System for `19-`20 Chevy/GMC Silverado/Sierra 1500 4.3L V6
Keep the flame of adventure lit and dominate the dirt with an Airaid Performance Cold Air Intake System. This air intake system features a CAD-designed intake tube engineered to reduce restriction and acce...
DEI’s Titanium Protect-A-Sleeve™ with LR Technology™ offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high-heat is present, these Titanium sleeves solve the problem of burning and cracking plug wires, and protect lines and hoses from engine and exhaust heat. Developed with DEI’s proprietary LR Technology, these high-temperature rated sleeves provide superior thermal protection for street vehicles or race engines. They protect fuel, oil lines, spark plugs, and electrical wires from direct heat up to 1800°F or under-hood radiant heat up to 2500°F. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobile, and marine use.
The ½” ID sleeves will fit many of today’s larger diameter spark plug wires for protection against hot exhaust manifolds and headers. Titanium Protect-A-Sleeve™ is also offered in 1″ and 2″ diameters.
Features:
Safeguards wires, lines, & hoses from extreme heat
Protects from direct heat up to 1800°F
Protects from radiant heat up to 2500°F
Proprietary LR Technology™ offers superior thermal protection
Made of pulverized lava rock material
Includes black boot shrink tubes (spark plug wire)
Both water & heat resistant
Ideal for ATV/UTV, motorcycle, snowmobile, & marine applications
Available in (3) sizes: 0.5” ID x 4’ length, 1” ID x 4’ length, & 2” ID x 3’ length
Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Design Engineering, Inc. (010475 -010483): Titanium Protect-A-Sleeve™
Design Engineering, Inc. (010475 -010483): Titanium Protect-A-Sleeve™
DEI’s Titanium Protect-A-Sleeve™ with LR Technology™ offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high-heat is present, these Titanium ...
Share This Post!