Category: Industry

RaceQuip: 5-Point Latch and Link SFI 16.1 Harness Sets

David Ayers Leave a comment
Use This Post Clip for Email

Distinguished by a pivoting duckbill “hammer,” these RaceQuip latch-and-link harnesses feature cadmium-plated, drop-forged steel hardware (no bolts) for the perfect combination of strength and weight. They also include 3” premium polyester webbing, twin individual shoulder belts, pull down–style lap belt, and single 2” crotch sub strap. All components exceed SFI 16.1 standards (tags affixed).

Using the included three-bar slide, the double-adjustable belts can be mounted by wrapping them around a rollbar or bolting them into place (snap-in ends and eyebolts sold separately). Available in nine colors:

  • Black: 711001
  • Red: 711011
  • Blue: 711021
  • Yellow: 711031
  • Orange: 711041
  • Purple: 711051
  • Platinum: 711061
  • Green: 711071
  • Pink: 711081

Note: NOT DOT/FMVSS certified for on-highway use.

Features

  • Exceed SFI 16.1 rating
  • Shoulders adjust from 20” to 62”
  • Lap belt adjusts from 20” to 60”
  • Premium 3” polyester webbing
  • Twin individual shoulder belts
  • Pull down–style lap belt
  • Five-point design with single 2” crotch sub strap
  • 3” hardware ends installed
  • Double adjustable for ease of installation
  • Wrap-around or bolt-in mounting
  • Drop-forged steel hardware (no bolts)
RaceQuip 5-point Latch and Link Harness Set 711001

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (26015): Trail Performance Struts for ’16-’20 Toyota Tacoma 4WD

David Ayers Leave a comment
Use This Post Clip for Email

Level your 2016–2020 Toyota Tacoma 4WD and amp up its suspension control with Trail Performance Struts from Belltech. With the 26015 kit, you’ll not only enjoy improved performance and safety but also the ability to lift your Tacoma’s ride height up to 2” in half-inch increments—all from the same part!

Thanks to a combination of low-speed compression and rebound characteristics, these Belltech Trail Performance Struts produce a great balance of everyday driving comfort and the spirit to tackle adventurous trails.

Features

  • For 2016–2020 Toyota Tacoma 4WD
  • Patented adjustable struts (from OEM stock to a true 2” lift, in 0.5” increments)
  • Performance sport ride and improved overall handling
  • Progressive rate polymer bumpstop
  • Adjustable packer design to dial in proper bumpstop engagement
  • Reduces body roll, dive, underbraking, and squat under acceleration
  • Retains OEM droop travel
  • Vulcanized OEM-style lower bushing with increased durometer
Belltech Trail Performance Struts for 16-20 Toyota Tacoma 4WD 26015_2
Belltech Trail Performance Struts for 16-20 Toyota Tacoma 4WD 26015

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FST Carburetors (41750P-1): 750 CFM RT Plus Vacuum Secondary Carburetor

David Ayers Leave a comment
Use This Post Clip for Email

If you need road reliability during the week and track performance on the weekend, FST Carburetors has you covered. Coming in at 750 CFM, the RT Plus carburetor with vacuum secondary and manual choke combines the durability of a pressure-forged carb with the performance of pressure-forged metering blocks and bases. Packing the full array of options and tunability, this RT Plus carb comes with black-electroplated components for an aggressive appearance.

Features

  • 750 CFM
  • Vacuum secondary
  • Manual choke
  • Black-electroplated metering blocks and bases
  • Pressure-forged construction
FST Carburetors 750 CFM RT Plus Carburetor with Vacuum Secondary 41750P-1

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

LEED Brakes (BPG001): Brake Pressure Gauge Kit

David Ayers Leave a comment
Use This Post Clip for Email

Easily diagnose a variety of brake issues with a Brake Pressure Gauge Kit from LEED Brakes. By checking brake pressure at the caliper or wheel cylinder, you can verify proper master cylinder bore size, check master cylinder and power booster function, determine mechanical vs. hydraulic issues, find faulty proportioning valves, uncover front-to-rear brake bias, and much more.

The LEED Brakes BPG001 Brake Pressure Gauge Kit includes a brake pressure gauge, six adapters (5/16-24, 3/8-24, M7x1.0, M8x1.25, M10x1.0 & M10x1.5), instructions, and a solutions guide to help you fix what you find.

Features

  • Diagnose a variety of brake issues
  • Check pressure at caliper or wheel cylinder
  • Brake pressure gauge
  • 6 adapters: 5/16-24, 3/8-24, M7x1.0, M8x1.25, M10x1.0, and M10x1.5
  • Instructions
  • Solutions guide
LEED Brakes Brake Pressure Gauge Kit BPG001

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Spectre Performance (90610K): Air Intake Kit for ’16-’19 Camaro SS 6.2L V8

David Ayers Leave a comment
Use This Post Clip for Email

Squeeze more horsepower and torque out of your Chevy Camaro while protecting it from damaging debris with an air intake kit from Spectre Performance. This easy-to-install kit comes with a washable, reusable, low-restriction Spectre Performance air filter; a black powder-coated aluminum air intake tube; and a matching steel heat shield to minimize engine heat entering your intake inlet.

The 90610K kit comes with the rubber boots, velocity stack, stainless steel clamps, and hardware you need to achieve an OE fit and finish.

Features

  • For 2016–2019 Chevrolet Camaro SS 6.2L V8
  • Increases horsepower and torque
  • Black powder-coated aluminum air intake tube
  • Powder-coated steel heat shield
  • Black Spectre Performance air filter
  • Installation time: 90 minutes
Spectre Performance Air Intake Kit for Camaro SS 90610K

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Speedmaster: Chevy BBC 454 Black Finned Aluminum Valve Covers (Tall with Hole)

David Ayers Leave a comment
Use This Post Clip for Email

Finish off your engine in style with a set of black-finned aluminum valve covers from Speedmaster. Designed for Chevy BBC 454 engines, these tall cast-aluminum covers have a combo polished/black powder-coated finish, and they feature that classic raised, finned design for a noteworthy look. This Speedmaster PCE314.1028.03 set also comes with breather holes, so you can cross drilling off your installation checklist. Sold in pairs.

Features

  • For Chevy BBC 454 engines
  • Cast aluminum with a perimeter bolt mounting style
  • Tall with black fins
  • Finish: black and polished
  • Sold as a pair
Speedmaster Chevy BBC 454 Black Finned Aluminum Valve Covers Tall with Hole PCE314.1028.03

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66431): Universal 50-Amp Mini Alternator

David Ayers Leave a comment
Use This Post Clip for Email

If you don’t need your alternator to power a city block, the 66431 50-amp mini alternator from PROFORM packs the punch you need while adding just 6 lb to your build. This reliable, chrome-finished, one-wire alternator is 100% new, includes a machined V-belt pulley, and is tested at the component and finish levels to ensure a premium experience.

Features

  • 50-amp output
  • Universal one-wire style
  • Machined V-belt pulley
  • Not remanufactured or refurbished
  • 96 mm housing
  • Weight: 6 lb
  • Finish: chrome
PROFORM 50 Amp Mini Alternator 66431

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (050551): Stainless Thermal and Acoustical Floor & Tunnel Shield

David Ayers Leave a comment
Use This Post Clip for Email

Engine and exhaust heat got you burning up? Engine noise rattling your skull? If you need to dial things down a notch in your vehicle’s interior, the new stainless steel Floor & Tunnel Shield from Design Engineering, Inc. is your solution.

DEI designed the 050551 Floor & Tunnel shield to be a versatile high-temperature (1,750°F direct heat) solution, backing sound-absorbing, micro-perforated stainless steel with 100% e-glass insulation. Peel-away adhesive backing gives you custom control that’s easy to apply: just cut with heavy scissors and stick. Available in 22” x 19” sheets.

Features

  • Durable stainless steel outer layer
  • Micro perforations absorb sound waves.
  • Backed with 100% e-glass insulation
  • Direct heat resistance: 1,750°F
  • Peel-and-stick adhesive backing
  • Cuts with heavy scissors
  • 22” x 19” sheet
DEI Stainless Acoustic and Thermal Barrier 050551

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (141-882): Classic Style Chevrolet Air Cleaner Kit with Center Nut

David Ayers Leave a comment
Use This Post Clip for Email

PROFORM has brought its new dress-up color for Chevrolet Performance—Shark Gray—to its classic-style Chevy air cleaner kit. The red pops of color, including on the Bowtie-shaped air cleaner center nut, contrast handsomely with the new finish to give your engine bay a premium look. Includes a 14” stamped-steel cleaner, genuine GM AC Delco air filter, and all necessary hardware. Fits 5 1/8” and 4 7/32” carb necks. This complete kit is a licensed Chevrolet Performance product!

Features

  • NEW Shark Gray Chevrolet Performance finish
  • Fits 5 1/8” and 4 7/32” carb necks
  • 14” stamped-steel construction
  • Bowtie center nut with red outline
  • Includes genuine GM (AC Delco) air filter
  • Officially licensed Chevy Performance product
PROFORM Classic Chevy Air Cleaner with Center Nut 141-882

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: 6”-8” Suspension Lift Variations for ’07-’18 GM 1500 4×4

David Ayers Leave a comment
Use This Post Clip for Email

Get the lift and handling your GM 1500 4×4 has been waiting for with a Belltech suspension lift kit. These direct bolt-on kits offer front-height adjustable Trail Performance struts and rear Trail Performance twin-tube shocks, and install with minimal cutting and no welding required. Your 2007–2018 GM pickup will become more capable without sacrificing quality or factory driving performance.

Belltech has given these suspension lift kits a new front crossmember that relocates the pivot points of the lower control arm and retains the proper LCA angle while maintaining maximum ground clearance. Lift spindles correct ball joint working angles and eliminate bumpsteer, while the ride height–adjustable struts and matching rear shocks ensure the correct bump and droop travel for the new height.

Available Parts

  • 2007–2016 GM 1500 4×4: 150201SPS, 150201SP, 150201BK
  • 2016–2018 GM 1500 4×4: 150203SPS, 150203SP, 150203BK

Features

  • For 2007–2018 Chevy Silverado and GMC Sierra 4×4
  • New front crossmember relocates LCA pivot points to retain proper angle.
  • Lift spindles correct ball joint working angles and camber curve.
  • Outer tie rod mounting location minimizes bumpsteer.
  • Custom-valved, ride height–adjustable, twin-tube Trail Performance struts
  • Rear Trail Performance shocks provide correct bump and droop travel for new height.
  • Two-piece front differential drop provides for proper pinion angle, full CV joint articulation, and drive shaft angularity.
  • Quarter-inch, laser-cut steel skid plate protects the front differential.
  • Direct bolt-on installation (minimal cutting and no welding required)
  • Includes step-by-step instructions
Belltech 7-8 Inch Suspension Lift Variants for 07-18 GM 1500 4x4

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.