Category: News

Mishimoto: Performance Intercooler Kit for 2015+ Ford Mustang EcoBoost

David Ayers Leave a comment
Use This Post Clip for Email

Developed by Mishimoto to combat hot air temperatures produced by turbocharged four-cylinder engines in 2015-and-up Ford Mustangs, the Performance Intercooler Kit includes both hot-side (2.5”) and cold-side (2.75”) mandrel-bent aluminum intercooler pipes—allowing you to upgrade the entire EcoBoost system at one time. This direct-fit intercooler unit requires no modification to your Mustang. It fits with the stock active grille shutters and mounts in the stock location so as to not inhibit airflow to the radiator or AC condenser.

Thanks to a 25% increase in internal core volume and 165% increase in external film area, the intercooler reduces intake temperatures by 35°F. It is available in Sleek Silver or Stealth Black, with wrinkle black or polished silver pipes, and is backed by Mishimoto’s lifetime warranty. CARB EO #: D-759.

Features

  • Direct fit for 2015+ Ford Mustang EcoBoost.
  • 35°F (19.45°C) reduction in ambient air temperature.
  • +58% core size, +25% internal core volume, and +165% external fin surface area.
  • Replaces hot-side and cold-side intercooler pipes and couplers.
  • Cast end tanks and in-tank diverter provide optimal flow through intercooler.
  • Stock location prevents airflow blockage to radiator and AC condenser.
  • Installs in less than 2 hours without removing front bumper cover.
  • Retains stock active grille shutters, maintaining ideal aerodynamics.
  • Bar-and-plate construction with all-aluminum TIG-welded end tanks.
  • CNC-machined BPV flange on hot-side pipe.
  • Two finishes: Stealth Black or Sleek Silver, with polished silver or wrinkle black pipes.
  • CARB EO #: D-759.

Mishmimoto Performance Intercooler Kit for 2015 and Up Ford Mustang EcoBoost MMINT-MUS4-15KPSL_1

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (SA404): CarTech’s “New Hemi Engines 2003 to Present: How to Build Max Performance”

David Ayers Leave a comment
Use This Post Clip for Email

If you need to transform your new Hemi engine into an even more responsive and faster power plant, New Hemi Engines 2003 to Present: How to Build Max Performance from CarTech has arrived to show you everything you need to know to build the engine to suit all your high-performance needs.

Veteran author and Mopar engine expert Larry Shepherd reveals current modification techniques and products you can use to take the most powerful pushrod V8 engine on the market today to another level. Covered topics include superchargers, cams, intake manifold and fuel systems, exhaust and ignition systems, stock and forged crankshafts, high-lift flow characteristics, aftermarket heads, and I- and H-beam connecting rods that will help you choose the best rotating assembly for your project.

New Hemi Engines 2003 to Present: How to Build Max Performance (SA404) from CarTech teaches you how to get everything you want out of your third-generation Hemi.

Pages: 144
Size: 8.5” x 11”
Format: Paperback
Illustrations: 334 color

CarTech New Hemi Engines 2003 to Present How to Build Max Performance

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N: Electronic Carburetor Injection (ECI) System

David Ayers Leave a comment
Use This Post Clip for Email

The K&N Electronic Carburetor Injection, or ECI, is a bolt-on system that adds a supplemental fuel source to your engine. The system consists of a carb spacer plate with a fuel block and injector, an ECU, and a wide band O2 sensor. The plate has a provision for the fuel injector. When needed, the injector squirts atomized fuel into the air stream passing through the spacer plate.

In a way, the ECI system works like an EFI system that reads the air/fuel ratio fed to it from an included O2 sensor that you install in your exhaust. Where this differs from EFI is that it is used in conjunction with the carburetor. Any time the system detects a lean condition, the injector kicks on to bring the AFR back to spec, but the engine is still fed primarily by the carb.

The brain of the ECI system is the ECU. It constantly reads input from the included O2 sensor and monitors the air/fuel ratio. Before you fire the engine for the first time, you answer a few simple questions and set parameters for the system to follow. One of those parameters is AFR. If the system detects an AFR higher than the user-defined limit, the weatherproof ECU tells the injector to fire.

K&N’s ECI can be installed in your driveway in a matter of hours, not days. And after setting five simple parameters, it can tune itself.

Features

  • Add supplemental fuel to your engine to keep high-HP engines running smoothly.
  • Includes carb spacer plate, fuel block and injector, ECU, and wide-band O2 sensor.
  • Define AFR parameters and the system responds to changes on the fly.
  • Also set parameters for injector pulse width, shot volume, progressive injector firing, and min/max RPM range.
  • Installs in a matter of hours—not days.
  • No need for 3D mapping software or vehicle tuning.

K&N Electronic Carburetor Injection ECI System

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NOS (15184NOS): Gen III Hemi Nitrous Plate Only Kit

David Ayers Leave a comment
Use This Post Clip for Email

Designed for Gen III Hemi engines with standard 80mm throttle body, the 15184NOS plate-only nitrous kit from NOS allows maximum room forward of the throttle body to clear accessory drives, tensioner brackets, and other obstacles thanks to its slim profile (only 1/2” at the mounting flange).

Made from black-anodized T6 aluminum and supports 250+ rear wheel horsepower. Also available in a complete kit (05184NOS).

Features

  • For 2003+ Chrysler Gen III Hemi with 80mm throttle body.
  • Single 1/2” plate between throttle body and manifold.
  • Black anodized 6060-T6 aluminum.
  • Supports 250+ RWHP.
  • Includes jetting for 75, 200, 125 & 150 RWHP.

NOS Gen III Hemi Nitrous Plate Only Kit 15184

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FiTech (30008): 800 HP Meanstreet EFI

David Ayers Leave a comment
Use This Post Clip for Email

The Meanstreet 800 HP eight-injector kit from FiTech delivers incredible power in a compact package. The 30008 EFI offers an onboard ECU, fuel-pressure regulator, clean wiring, and easy installation directly on the throttle body—no hole in your firewall or unsightly harness draped across your engine—while the wideband O2 and annual swirl wet flow technology give you the most complete atomization available.

Users will enjoy getting on the road or track faster than ever via the Meanstreet’s proprietary self-tuning capabilities: all you need is your gas pedal and the included handheld touch screen controller. Meanstreet fits any four-barrel intake manifold and is the most self-contained, fully featured unit of its type.

30008 Kit Contents

  • Blacked-out die-cast throttle body.
  • Altitude compensation.
  • Windshield mount.
  • 8 high-flow 800 HP injectors.
  • Built-in pressure regulator.
  • Internal MAP, throttle position, idle air control, coolant temp, and wide-band O2 sensors.
  • O2 bung kit.
  • -06AN fuel inlet fittings.

FiTech 800 HP Meanstreet EFI 30008

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD Performance Atomic Transmission Control Module 2760

MSD Performance (2760): Atomic Standalone Transmission Control Module

David Ayers Leave a comment
Use This Post Clip for Email

The Atomic EFI series from MSD Performance is designed to be easy to install and set up, and the 2760 transmission control module from the same family follows in those footsteps. This standalone controller takes the mystery out of programming your GM or Ford four-speed automatic transmission, allowing you to modify shift points, torque converter clutch behavior, shift firmness, and more via the supplied handheld monitor—no more computers or confusing software.

You can leave the monitor in place to keep tabs on your transmission performance or disconnect when finished adjusting. View data such as engine or vehicle speed, throttle position, transmission fluid temperature, shifter position, commanded gear, and many others.

Features

  • Adjust shift points and torque converter clutch behavior.
  • Select different levels of shift firmness.
  • Choose auto-shift mode or manual-shift mode.
  • Included Dyno Mode delivers repeatable chassis dyno results.

MSD Performance Atomic Transmission Control Module 2760

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Email Center: Send Email like a Pro

David Ayers Leave a comment
Use This Post Clip for Email

Email Center™ is a new service designed to make email marketing easier than ever before, with user-friendly, time-saving features that let aftermarket retailers and installers communicate quickly and effectively with all of your customers. If you thought email is too hard or takes too much time, think again!

Effective email marketing starts with a good list, and Email Center™ simplifies the creation and maintenance of contacts. For example, you can create subgroups for targeted messages and determine the effectiveness of your efforts with analytics tools.

Email Center™ also gives you prepared templates, drag-and-drop editing (no technical knowledge required), automated sending, the ability to accept payments through email, one-on-one support, and more!

Parts Pro™ Platinum subscribers can send unlimited emails per month to up to 500 unique recipients at no additional cost; for non-subscribers, cost varies based on the number of email addresses in their overall lists. For pricing information or to learn more, contact us at (800) 251-4252 or sales@theaamgroup.com today!

Features and Benefits

  • Unlimited sent emails
  • Drag-and-drop editing
  • Prepared templates
  • Automated functions
  • Transaction-based emails
  • Targeted emails by group
  • Easy list management
  • Tracking and testing tools
  • Knowledgeable customer support
  • Quick login through the Insight™ account system

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: Hypertech Max Energy 2.0 Power Programmer

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the Max Energy 2.0 Power Programmer from Hypertech on a 2014 Chevy Camaro V6.

Parts used in this video:

Max Energy 2.0 Power Programmer (2000)

Max Energy 2.0 Power Programmer, California Emission Legal (2100)

Want to check out more about Hypertech?
https://partspro.com/manufacturer/hypertech

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66988): Double-End AN Wrench Set

David Ayers Leave a comment
Use This Post Clip for Email

The new four-piece, double-end AN wrench set from PROFORM is a terrific way to add versatility to your toolbox. Each wrench boasts 30- and 60-degree heads to grip hose ends from a wider array of positions and into some of the tightest spaces thanks to its streamlined handle edges. These wrenches offer a firm grip, CNC-machined fitting numbers, and a brilliant color-coded finish (blue -6AN, gold -8AN, red -10 AN, and black -12AN). Store and transport easily via included nylon carry case.

Features

  • Quality billet aluminum protects AN fittings.
  • 30- and 60-degree heads on every wrench.
  • Superior grip and comfort.
  • AN number micro-CNCd into every handle.
  • Sturdy nylon zippered case included.

PROFORM Double-End AN Wrench Set 66988

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter: 3-1/8” Pedestal Mounting Cups

David Ayers Leave a comment
Use This Post Clip for Email

The new 3-1/8” mounting cups from AutoMeter answer the challenge of finding the perfect place to mount your AutoMeter tach or speedo (22 models currently available). This product can be mounted inside or outside of the cabin, on top of or under the dash. A great choice for AutoMeter’s “Street Rod” series gauges (e.g., Arctic White, Designer Black, Old Tyme White/Black, Antique Beige, etc.)

Available in Chrome (2153) or Black (2154); includes mounting strap, black base, hardware, and instructions.

Features

  • Universal mounting for AutoMeter 3-1/8” tachometers or electric speedometers.
  • Can be mounted inside or out, on or under the dash.
  • Includes mounting hardware and installation instructions.
  • Available in Chrome or Black.

AutoMeter Pedestal Mounting Cups

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.