K&N (57-3081): 57 Series FIPK Air Intake

David Ayers Leave a comment
Use This Post Clip for Email

Replacing your vehicle’s restrictive factory air filter and air intake housing, the 57-3081 FIPK air intake from K&N allows your engine to inhale a larger amount of air than ever before—and more air means more usable power and acceleration throughout the engine’s RPM range. This 57 Series air intake comes with a chrome-topped K&N high-flow air filter and a heat shield that installs into the previous air box space. The tube accommodates the factory mass air sensor, air temperature sensor, and evaporative canister vent line, while the oversized conical air filter can be used for up to 50,000 miles before servicing (depending on driving conditions).

Note: Street legal in all 50 states.

Features

  • Simple and cost-effective horsepower upgrade.
  • Improves throttle response and engine sound.
  • Free-flowing, high-density polyethylene tube.
  • Replaces factory air filter and intake tube.
  • Washable and reusable air filter.
  • Street legal in all 50 states.
  • Installation time: < 90 minutes (with commonly available tools).
  • Warranty: K&N Million Mile Limited Warranty.
K&N FIPK 57 Series Air Intake System 57-3081

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hypertech (730129): In-Line Speedometer Calibrator Module for 2019 GM 1500

David Ayers Leave a comment
Use This Post Clip for Email

Perfect for GM 1500 trucks with computers that don’t allow for tire size correction (or that have tire sizes outside the range of programmers), the 730129 In-Line Speedometer Calibrator from Hypertech is the best way to recalibrate your speedometer and odometer for larger-than-stock tires. This product has no limit for increasing tire height, while it has a lower limit of 50% of your 1500’s stock tire size. Hypertech designed the In-Line Speedometer Calibrator for an easy plug-and-play installation into the factory wiring harness—no splicing required!

Note: Not legal for sale or use in California.

Features

  • For 2019 GMC Sierra 1500 and Chevy Silverado 1500.
  • Speedometer/odometer correction for tire sizes (no upper limit; lower limit 50% of stock tire size).
  • Speedometer/odometer correction for gears (all valid gear ratios supported).
  • Plug-and-play installation; no splicing required.
Hypertech In-Line Speedometer Calibrator Module for 2019 GM 1500

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products (6014): Race Display System with 35 PSI Water Pressure Channel

David Ayers Leave a comment
Use This Post Clip for Email

Uniquely designed to meet the specialized needs of racers competing on dirt or asphalt short tracks, the 6014 Race Display System from AutoMeter monitors oil and carbureted fuel pressure, oil and water temperature, and battery voltage, while the water pressure channel accommodates an optional water pressure sensor (AutoMeter PN ST747).

The single, compact (7.5” x 4”), waterproof display includes a signature AutoMeter analog pointer, which quickly and clearly communicates engine RPM information, and a digital display screen preconfigured with multiple layouts for auxiliary engine instrumentation needs.

Drivers can customize warning points specific to their setups (text alerts or alarm lights) and record 2 hours of track data with playback right from the display.

The 6014 Race Display System includes two 1/8” NPT temperature sensors, one 1/8” NPT 15 PSI fuel pressure sensor, and one 1/8” NPT 150 PSI oil pressure sensor—plus a pre-terminated wiring loom, external push-button controls with weather-resistant caps, mounting template, installation brackets, and operating manual.

Features

  • Race-proven digital display monitors engine RPM, oil pressure/temperature, water temperature, carbureted fuel pressure, and battery voltage.
  • Integrated channel lets you monitor water pressure with purchase of additional sensor.
  • Intelligent alarm system allows for user-configurable text and integrated light activation points for all channels.
  • Built-in memory with the ability to record and play back up to 120 minutes of data.
  • Premium pre-terminated wiring loom.
  • Water-, dust-, shock-, and vibration-resistant design.
  • Compatible with optional infrared beacon and receiver assemblies, extension cables, and external alarm lamps (sold separately).
  • Dimensions: 7.5” W x 4” H.

AutoMeter Race Display System with 35 PSI Water Pressure Channel 6014

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Aftermarket Websites Has Gone PRO

David Ayers Leave a comment
Use This Post Clip for Email
Aftermarket Websites™, the website-building service just for performance accessory retailers and installers, has gone PRO. Headlined by Year/Make/Model search capability, Aftermarket Websites™ PRO delivers accurate fitment information designed to help you attract new customers and close more sales. AW PRO sites are next-level marketing tools for businesses that are ready to take their ecommerce efforts to the max. In addition to all the standard Aftermarket Websites™ features, AW PRO includes: • Robust Year/Make/Model search function. • Easy-to-use email-management service. • Thousands of SKUs uploaded for you. • Deeper customization options. • Access to premium data. • Many future enhancements based on the Y/M/M platform. Best of all, AW PRO is an incredible value: • New customers pay a $1,499 one-time setup fee and $299.95 a month. • Existing Aftermarket Websites™ customers who go PRO pay a $999 one-time upgrade fee and are moved to $299.95 a month. • Compare that to similar services costing from $499 to $1,500 a month and $5,000 in setup costs, and AW PRO continues to deliver the value our partners expect. Time to Go PRO! To start the ball rolling on your new PRO site, please call (888) 251-4252 today. Or learn more about the service in general at AftermarketWebsites.com.

Aftermarket Websites™, the website-building service just for performance accessory retailers and installers, has gone PRO.

Headlined by Year/Make/Model search capability, Aftermarket Websites™ PRO delivers accurate fitment information designed to help you attract new customers and close more sales. AW PRO sites are next-level marketing tools for businesses that are ready to take their ecommerce efforts to the max.

In addition to all the standard Aftermarket Websites™ features, AW PRO includes:

  • Robust Year/Make/Model search function.
  • Easy-to-use email-management service.
  • Thousands of SKUs uploaded for you.
  • Deeper customization options.
  • Access to premium data.
  • Many future enhancements based on the Y/M/M platform.

Best of all, AW PRO is an incredible value:

  • New customers pay a $1,499 one-time setup fee and $299.95 a month.
  • Existing Aftermarket Websites™ customers who go PRO pay a $999 one-time upgrade fee and are moved to $299.95 a month.
  • Compare that to similar services costing from $499 to $1,500 a month and $5,000 in setup costs, and AW PRO continues to deliver the value our partners expect.

Time to Go PRO!

To start the ball rolling on your new PRO site, please call (888) 251-4252 today. Or learn more about the service in general at AftermarketWebsites.com.

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

KW Suspensions: Get up to $350 Back on Select Coilovers

David Ayers Leave a comment
Use This Post Clip for Email

Offer good March 1 to May 31. Click image for printable form and complete details!

KW Suspensions Get up to $350 Back on Coilovers

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter: Get up to $150 Back on Tachometers During “Tachs Season” Rebate Period

David Ayers Leave a comment
Use This Post Clip for Email

Offer good March 1 to April 30. Click image for printable form and complete details!

AutoMeter Tachs Season 2019

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products: Mopar Classic Gauges

David Ayers Leave a comment
Use This Post Clip for Email

Officially licensed Mopar Classic gauges from AutoMeter help you protect your investment by providing accurate, reliable, track-tested, and race-proven information about what’s going on under the hood. These gauges are finished with chrome bezels and easy-to-read black dials featuring fluorescent red needles; aircraft-inspired incandescent perimeter illumination; and the red, white, and blue Mopar heritage logo.

AutoMeter has Mopar Classic gauges available to measure fuel level, oil pressure, water temperature, and volts in 2-1/16” diameter sizes; at 3-3/8”, you can get a programmable speedometer and in-dash or pedestal-mounted tachs.

Features

  • Fuel level, oil pressure, water temperature, and volt gauges in 2-1/16” diameter.
  • Programmable speedometer and in-dash or pedestal-mounted tachs in 3-3/8” diameter.
  • Oil pressure and water temp gauges include Mopar-appropriate sensors and brass adapter fittings.
  • Red and green bulb covers offer a pleasant low-light experience.
AutoMeter Mopar Classic Gauges

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM: Chevy Orange Stock-Height Valve Covers for Small-Block Chevy Gen II

David Ayers Leave a comment
Use This Post Clip for Email

Now available in popular Chevy Orange to complete your desired look, these stock-height valve covers from PROFORM have a factory design and shape, with hand-painted black fins and Bowtie. The covers received a SEMA Global Media Award for being one of the best new products in the show, and it’s easy to see why: PROFORM manufactures them to GM specifications (including using GM-designed baffles), but uses stamped steel that is 20% thicker than typical aftermarket covers. This officially licensed product is sold in pairs.

Features

  • Fits 305-350 SBC engines 1987 to pre-LS.
  • Chevy Orange finish with black ribs and Bowtie.
  • Made from quality steel.
  • Short, center-bolt style with baffles.
  • Officially licensed Chevrolet Performance Product.
  • Sold as one pair.
PROFORM Chevy Orange Value Covers for SBC Gen II

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Northern Radiator: High Performance Diesel Radiators

David Ayers Leave a comment
Use This Post Clip for Email

While the plastic tank/aluminum core radiators available from Northern Radiator might look OEM, the company has incorporated design principles found in big rigs for the high performance radiators they manufacture for diesel pickups. Crossover features include:

  • Tank-to-header attachment has a heavy-gauge steel crimp strip instead of aluminum on OEM.
  • Internally reinforced end tubes with bridge clips that reinforce the core’s most vulnerable point: the outside corners.
  • Ribs buttress weak spots on the tank, specifically where the OEM failed to predict flex.
  • Fiber-reinforced plastic and extra-strong integrated mounting points.
  • Proprietary rubber seal gaskets allow for the expansion and natural twisting of your truck’s suspension. Though these gaskets are the number-one critical component, they are often overlooked by designers—not so with Northern Radiator.
  • Core is the best in the business: more fins per inch and heavy-duty tubes cool better than stock.

Aimed at the diesel performance enthusiast, these radiators offer trouble-free OEM mounting and are standard replacement options for existing OEM radiators. Available for various GM, Ram, and F-Series applications.

Northern Radiator High Performance Diesel Radiators

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR1048): Big Switch 500 Racing Battery Disconnect Safety Switch

David Ayers Leave a comment
Use This Post Clip for Email

Coming in at only 19.2 oz., the 500-amp Big Switch 500 battery disconnect safety switch from Flaming River handles surges of 2,500 amps for up to 5 seconds and can be installed on 12/16 and 24V charging systems.

Flaming River designed the FR1048 with a high-impact, glass-filled, molded-nylon body to resist extreme vibration; an IP65-rated housing to resist water; silver-plated studs; easy-grip T-handle for efficient operation; and corrosion-resistant, black-anodized aluminum bracket.

Accepted by most race-sanctioning bodies (including IHRA and NHRA).

Features

  • Continuous-service switch handles surges of 2,500 amps for up to 5 seconds.
  • Can be installed on 12/16 and 24-volt charging systems.
  • Weighs only 19.2 oz—15% lighter than previous products.
  • High-impact, glass-filled nylon body to absorb vibration.
  • IP65 housing resists water.
  • Easy-grip T-handle, corrosion-resistant bracket, and silver-plated studs.
  • Warranty: 1 year.
Flaming River 500 Amp Racing Battery Disconnect Safety Switch

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.