Tag: taylor cable products

Taylor Cable Products: ThunderVolt 50 Race Fit and Universal Wire Sets

David Ayers Leave a comment
Use This Post Clip for Email

Ignite your high performance aspirations with ThunderVolt 50 from Taylor Cable Products, the best .409”, 10.4 mm ignition wires on the market. ThunderVolt 50 wire is IROC dyno tested and track proven to achieve gains of 5 hp and 7 lb torque over the competition.

Compatible with most electronic ignition systems and components, Taylor’s 40 Ohm/ft Ferrite Spiral-Wound, low-resistance core provides optimal RFI and EMI suppression, while the tightly woven, heat-treated fiberglass braid eliminates the need for additional sleeving. Finally, the exclusive, three-layer ZIMPLEX silicone outer jacket provides heat and abrasion protection up to 600°F and 102,000 volts of dielectric strength—a must for the extreme conditions of open-wheel racing and under-hood temperatures.

Taylor offers ThunderVolt 50 wire sets in black with gold lettering.

Note: Compatible with most American-made vehicles, universal-fit sets will require cutting to fit.

Features

  • 10.4 mm ignition wire compatible with most electronic ignition systems/components
  • IROC dyno tested and track proven to provide +5 hp and +7 lb torque
  • 40 Ohm/ft Ferrite Spiral-Wound coated core
  • Tightly woven, heat-treated fiberglass braid eliminates the need for additional sleeving.
  • Three-layer ZIMPLEX silicone outer jacket protects against heat up to 600°F and 102,000 volts of dielectric strength.
  • Available in black with gold lettering
Taylor Cable Products ThunderVolt 50 Race Fit and Universal Wire Sets 98045

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor Cable Products (661000): Ready-to-Run Vertex Distributor

David Ayers Leave a comment
Use This Post Clip for Email

With its simple, three-wire connector, this ready-to-run Vertex distributor from Taylor Cable Products is ideal for street or track applications. The 661000 model features an adjustable vacuum that adds 10 degrees of advance, a machine-polished aluminum housing, solid brass terminals, a compact footprint that allows more clearance around the intake manifold, and a high performance circuit board for up to 9,000 RPM.

Features

  • For Chevy BB (396-454) and SB (262-400) engines
  • Potted aluminum housing with premium epoxy encase
  • Primary and secondary winding
  • Protects coil’s internal components
  • Alkyd tower and brass coil terminals
  • No carbon tracking
  • Spacing prevents arcing to ground
  • High performance circuit board for up to 9K RPM
Taylor Cable Products Ready to Run Vertex Distributor 661000

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor Cable Products: Firepower 9-mm Racing Ignition Wires

David Ayers Leave a comment
Use This Post Clip for Email

Firepower 9-mm ignition wires are the lowest-resistance wire that Taylor Cable Products makes: only 25 Ohms per square foot, meaning more horsepower, torque, and spark energy for your application. Taylor achieves this feat thanks to a coated-core blend of exclusive copper-nickel alloy bonded by a conductive acrylic cover and a ZIMPLEX® silicone outer jacket that provides additional heat and abrasion protection (up to 600 degrees and 102,000 volts of dielectric strength).

Available in Black with Silver lettering, with low-profile, color-coordinated, 100% silicone PROBOOTS®.

Note: Universal-fit sets available for most American-made vehicles (no imports).

Features

  • The ultimate performance/racing ignition wire available
  • Taylor’s lowest-resistance wire: 9-mm diameter and 25 Ohms per foot
  • Ferrite spiral-wound coated core
  • Perfect for the extremes of open-wheel racing and under-hood temperatures
  • Black with Silver lettering
Taylor Cable Products Firepower 9 mm Ignition Wire 92037

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor Cable Products: Vertex Z6 CD Ignition Box

David Ayers Leave a comment
Use This Post Clip for Email

Available in a variety of housings and colors, including powder-coated cast aluminum, polished billet, and anodized billet, the Vertex Z6 CD ignition box from Taylor Cable Products is a study in performance, looks, and reliability. Its rotary dial rev limiter is adjustable in 100-rpm increments (2,000–9,900 rpm), and it boasts a sealed cover to keep out water and debris. Current-overload protection automatically shuts off the box if a problem is detected with the coil, circumstances that can cause lesser boxes to overheat and die.

The Taylor Vertex Z6 CD ignition box will multi-spark up to 3,000 rpm for easier starting and a smoother idle, while the sealed wiring connector makes installation easy. The box comes with a complete hardware kit and harnesses to fit most applications.

Features

  • Works with 4-, 6-, and 8-cylinder engines
  • Maximum operating rpm: 9,900
  • Current-overload shutdown protects the ignition from coil failure.
  • Reverse polarity protection
  • LED indicator flashes for system errors
  • Includes all hardware and a Taylor-manufactured wire harness with a sealed locking connector
  • Size: 8” x 4” x 2“
  • Volt operation: 10–14.5
  • Spark energy: 150 mJ
  • Current draw: 0.75 amps/1,000 rpm
  • Output voltage: 550 primary/47,000 secondary
  • Available materials: cast aluminum, polished billet aluminum, and anodized aluminum
  • Available colors: red, polished, and black
  • Made in the USA
  • Warranty: 1 year
Taylor Cable Products Vertex Z6 CD Ignition Box 401003

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.