Category: Industry

AutoMeter Products (7060): Extreme-Environment Three-Gauge Kit for UTV Applications

David Ayers Leave a comment
Use This Post Clip for Email

The Extreme-Environment Three-Gauge Kit by AutoMeter is universally made for UTV, ATV, and off-road treks through thick mud, sandy dunes, and deep puddles. Ensure your gauges never let you down when you need them most with this heavy-duty, reliable kit. This kit features gauges that give accurate readings for water temperature, oil pressure, and volts. These gauges are housed in a sturdy, universal gauge-pod to ensure they can operate under harsh conditions and still hold up. These gauges produces accurate readings, even in harsh environments where reliability and accuracy is vital to the safety and well-being of your vehicle and its passengers. The LED lighting ensures gauge readings can be seen in any environment, including extreme darkness or high speeds. These gauges are 100% water resistant, which backed by an IP69K rating. This kit includes a wiring harness with a Deutsch connector, as well as the water temperature and oil pressure sending units.

Features:

  • For UTV, ATV, off-road applications
  • Displays (3) vital metrics:
    • Water Temperature
    • Oil Pressure
    • Volts
  • Race-proven digital stepper motor movements
  • Solid state laboratory-grade sensors
  • Exceptional response, precision, & accuracy
  • LED lighting illuminates gauge readings
  • Preset full red-light dial warning
  • External momentary switch
  • Brightness control
  • Peak recall control (water-temp only)
  • Ultra-lightweight construction
  • Vibration & water resistant (IP69K Rating)
  • Includes wiring harness with a Deutsch connector

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66945RC): HEI Distributor Electronic Tune-Up Kit for `55-`82 Chevy/GM V8 Engines

David Ayers Leave a comment
Use This Post Clip for Email

Give your distributor a new lease on life with the PROFORM HEI Distributor Electronic Tune-Up Kit. Each kit contains a high-power, 50,000-volt HEI coil. It also boasts a superior “no arc” rotator. The coil dust cover is made for protection, while the control module is made for high-performance but low saturation. This kit is easy to install and can upgrade your ignition system in as little as ten minutes of installation time. All components included in this kit are 100% new, this means no re-manned or refurbished items are included. This kit also features an adjustable vacuum advance unit. This HEI Distributor Tune-Up Kit is specifically designed for 1955-1982 Chevrolet/GM V8 engines.

Features:

  • For `55-`82 Chevy/GM V8 engines
  • Upgrades ignition system in 10 minutes
  • Improved auto response
  • High-performance coil has 50,000 volts spark energy
  • Low saturation with high-output control module
  • 100% new components (not re-manned or refurbished)
  • Includes mounting hardware & instructions

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ARP (256-4301): Cylinder Head Stud Kit for `13+ Ford Coyote 5.0L (11mm)

David Ayers Leave a comment
Use This Post Clip for Email

The key to optimum combustion-chamber sealing and long-term reliability, ARP head studs are the ideal replacement for factory TTY (Torque to Yield) bolts that are yielded in the assembly process and should never be re-used. Moreover, ARP head studs for the Coyote are made from proprietary ARP2000™ material that is nominally rated at 220,000 psi tensile strength to facilitate increased clamping force. They are engineered for high-combustion pressure applications, including supercharging, turbocharging or use of nitrous oxide. The kits include parallel-ground washers, 12-point nuts, and a packet of ARP Ultra-Torque® fastener lubricant.

Features:

  • For `13+ Ford Coyote 5.0L engines (11mm)
  • Designed for high-combustion pressure applications
  • Replacement for OEM TTY (Torque to Yield) bolts
  • Made from proprietary ARP2000™ material
  • ARP2000™ material has a 220,000-psi tensile strength
  • Facilitates increased clamping force
  • Perfect for supercharging, turbocharging, or N2O
  • Includes parallel-ground washers, 12-point nuts, & ARP Ultra-Torque® fastener lubricant

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (33-5047): High-Flow Air Filters™ for `16-`21 Chevy Camaro SS/ZL1 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

K&N washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants. And, they are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. Each filter is backed by the K&N 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Features:

  • For `16-`21 Chevy Camaro SS/ZL1 6.2L V8 Gas vehicles
  • Washable & reusable air filter replacement
  • Designed to increase horsepower
  • Provides high airflow & exceptional filtration
  • Engineered to easily fit into OEM air box
  • Panel design with cotton-gauze filter material
  • Needs cleaning every 50,000 miles (under normal conditions)
  • Emissions legal in all (50) states
  • Easy to install in 5-10 minutes

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (15001): Coilover Kit for `15-`19 Ford F-150

David Ayers Leave a comment
Use This Post Clip for Email

Need the ultimate in handling and ride-height tuning? Belltech Coilover systems by KW are the answer. These Coilover Kits provide complete height-adjustable replacement shocks and springs in an application-specific, complete, coilover unit. Using damper and valve technology designed and manufactured by our German sister company KW Suspensions, Belltech now offers a complete solution for the front end of your strut-equipped Sport Truck or SUV. Increase grip and reduce body roll, both while retaining the daily driven comfort you require. Each kit consists of two threaded-body performance dampers with the option of independent compression and rebound damping force adjustability. Belltech Coilovers come preassembled with matched performance coil springs, bump stops, dust boots, and OEM-style top mounts. This premium option is a complete ready-to-install out-of-the-box solution!

Features:

  • Fits `15-`19 Ford F-150 2WD/4WD (all cabs)
  • Lowering range: -1” to -3”
  • Large 60mm gold-zinc galvanized strut housing
  • 22mm hardened-chrome piston rods
  • Aluminum lower spring seats
  • Factory preset fixed damping forces (non-adjustable)
  • Progressive-rate polymer can open cell-foam bump stops
  • Plastic dust shields
  • OEM-quality damper components for extra durability & long life
  • OEM-style top mounts

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Cloyes (9-0391SBVVT): Variable Valve Timing (VVT) Chain Kit for Ford 4.6L/5.4L

David Ayers Leave a comment
Use This Post Clip for Email

Cloyes’ Variable Valve Timing (VVT) Chain Kits and Components offer technicians a complete repair solution for higher mileage vehicles and are designed for the replacement of worn or damaged timing chains, tensioners, sprockets, guides, and VVT actuators (also known as cam phasers). Cloyes parts are CAD designed and manufactured using premium materials. VVT components are 100% tested during production. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Test parameters include adjustable angle, leakage, locking pin functionality, friction, max oil flow, and holding duty cycle. VVT Chain Kits include new camshaft phaser torque-to-yield (TTY) attachment bolts to ensure proper installation and phaser function

For the popular 3V Ford 4.6-liter and 5.4- liter applications, Cloyes has developed a uniquely designed actuator that is superior to the OE and competitive aftermarket product, performing better under low oil pressure conditions by eliminating contact between rotor and stator resulting in 10% more torque and 20% less internal drag.

Features:

  • For Ford 4.6L & 5.4L applications
  • Designed for higher-mileage vehicles
  • Uniquely designed actuator
  • Performs better in low oil pressure conditions
  • 10% more torque
  • 20% less internal drag
  • 100% tested during production
  • CAD designed
  • Includes new camshaft phaser TTY bolts

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (010751): Oil Rug (18” x 24”)

David Ayers Leave a comment
Use This Post Clip for Email

The DEI Oil Rug is designed to contain, catch, and absorb oil spills under vehicles, motorcycles, machinery, leaking equipment, and other maintenance areas. DEI Oil Rugs can absorb hazardous and non-hazardous materials including oil, petroleum, and glycols. These Oil Rugs are constructed with an absorbent felt face, hydrophobic material, and backed with a barrier layer to contain the fluids. Each Oil Rug can absorb over 16 ounces of typical motor oil per square foot, so they feature edges that are sealed to keep contaminants inside the rug.

Features:

  • 18” x 24” oil rug hold hazardous & non-hazardous material
  • Absorbs oil, petroleum, & glycols
  • Hold 16 oz. per square foot
  • Constructed from absorbent felt face & hydrophobic material
  • Backed with a barrier layer to contain fluids
  • Sealed edges keep contaminants inside the rug
  • For spills under vehicles, motorcycles, machinery, equipment, etc.

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products (7000): Universal Mount InVision Display

David Ayers Leave a comment
Use This Post Clip for Email

The new InVision Digital Dash provides a universal gauge display solution for your car or truck. Monitor the speedometer, tachometer, fuel level, oil pressure, water temperature, and volts all in one place. Upgrade your dash with the latest modern LCD offering from AutoMeter. The InVision Dash features a 12.3-inch LCD display with three user-selectable displays. This dash also features an adjustable RPM range and displays in either imperial or metric measurements. It also has a remote-mount joystick that allows for easy programming. The InVision Dash will help protect your vehicle with visual or audible alarms for low fuel level, low oil pressure, high water temperature, and low voltage. The speedometer easily calibrates to OEM or aftermarket vehicle speed sensors and the tachometer is capable of calibrating to many engine types. All kits include a wiring harness and sending units for water temperature and oil pressure.                            

Features:

  • Universal gauge display solution
  • Today’s technology for yesterday’s classic vehicles
  • Monitors fuel level, oil pressure, water temp, volts, tach, & speed
  • On-screen indicator for turn signals, high beams, & user-definable warning
  • Built-in odometer & (2) trip meters
  • 12.3” LCD display
  • (3) user-selectable screen templates
  • Adjustable time in 12- or 24-hour format
  • Adjustable brightness for day or night
  • Displays in imperial or metric measurements
  • Visual or audible alarms for low fuel, oil pressure, water temp, & voltage
  • Adjustable tachometer range of 8,000 RPM or 10,000 RPM
  • (7) user-selectable fuel level resistance ranges:
    • 0-90Ω
    • 240/33Ω
    • 73/10Ω liner & non-linear
    • 16/158Ω
    • 40/250Ω
    •  0/30Ω
  • Tachometer is compatible with 1/2/3/4/5/6/8/10/12-cylinder engines
  • Multiple warning points available for each parameter

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

KW Suspensions (35261029): Variant 3 Coilover Suspension Kit for Chevy Corvette

David Ayers Leave a comment
Use This Post Clip for Email

KW Suspensions has developed the Variant 3 Coilover Suspension Kit for the new 2020 Chevrolet C8 Corvette Stingray. On undulated asphalt surfaces, the KW Suspension maintains perfect harmony and prevents nervous driving behavior. The pitch and roll movements of the chassis and body are significantly reduced and handling becomes even more dynamic.

The Variant 3 Coilover Suspension Kit features KW’s TVR-A (Twin-Valve Rebound Adjustable) Technology. The rebound stage dampening is precisely tuned at the KW in-house drive dynamics test facility and delivered in the middle range straight out of the package. Individual customization can be achieved in 15 precise clicks adjusting to 16 different settings, allowing you to choose between more comfort or more body control. Additionally, this suspension kit features KW’s TVC-A (Twin-Valve Compression Adjustable) Technology for low speed. This adjustable low-speed compression dampening stage can be closed or opened with 12 precise clicks for further influence on steering behavior and grip level of the tires. For even more control and adjustability, the new C8 Corvette Stingray Coilover Suspension features ride height adjustability that can be configured between 0” and 1” (0-25mm) on the front and rear axles, allowing the suspension to be lowered to suit your personal needs.

KW Suspension struts are manufactured from high-quality stainless steel that is corrosion resistant and rust-proof. In contrast to other solutions, the Inox-Line coatings will not wear off while adjusting the suspension, which makes these coilover struts 100% corrosion resistant with an unlimited lifespan. Lowering the suspension using the trapezoidal thread, in combination with the polyamide composite spring seat, also guarantees long-term functionality of ride height adjustability.

Features:

  • Application specific for `20 Chevy C8 Corvette Stingray
  • Adjustable ride height from 0”-1” (0-25mm)
  • TVR-A Technology allows (16) adjustable settings for rebound valve
  • TVC-A Technology allows (12) adjustable settings for compression valve
  • Polyamide composite spring seat never corrodes or rusts
  • Friction-optimized trapezoidal thread for easy lowering
  • Inox-Line stainless steel struts are 100% corrosion resistant
  • 7-Post Drive Dynamics approved
  • Includes certified technical component report
  • Includes electronic dampening control kit
  • *Not for cars with original lift system

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (69595): Digital Variable-Speed Fan Controller

David Ayers Leave a comment
Use This Post Clip for Email

Maintaining a consistent engine temperature is a more efficient way to keep your engine cool. Many other fan controllers turn the fan on when the engine is getting too hot, then turn it off after expending a lot of energy cooling it. The hard turn-on leads to amperage spikes, and the max speed usage can be noisy. These problems will be reduced substantially with PROFORM’s new variable speed controller.

This variable speed fan controller makes the fan or fans run at whatever speed is needed to maintain a consistent temperature. The controller receives a temperature signal from the radiator through either a push-in, or thread-in brass probe (both included). The fan controller processes this signal and runs the fan(s) at the correct speed needed to maintain the desired temperature. The weather-resistant billet aluminum housing with a bright digital display ensures easy temperature setting by simply pushing + or – buttons. By simply pressing the MODE button, the digital display will show temperature in degrees Fahrenheit or Celsius. As a bonus, the display screen shows live amp use so you know how many amps your fan configuration is chewing up.

Features:

  • Variable speed fan controller
  • Digital display for easy setting
  • Single- or dual-fan compatible
  • Displays degrees F or C & live amp-usage
  • Short-circuit overload protection (E-fuse, 1-Click Reset)
  • Manual Override On/Off wire
  • Air Conditioning On/Off wire
  • Warning-light wire for optional light
  • 60-amp system maximum
  • Billet aluminum housing
  • Includes thread-in & push-in probes

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.