Category: Industry

Spectre Performance: $15 Back on Any Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

Spectre Performance 15 Dollars Back on Any Intake

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AEM: $25 Back on Any Intake System

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

AEM 25 Dollars Back on Intake System

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley (223-02): iNTECH Cold Air Intake for ’10-’15 Camaro 6.2L V8

David Ayers Leave a comment
Use This Post Clip for Email

Shipping July 7, the patent-pending 223-02 iNTECH cold air intake from Holley represents the highest level of technology, style, and performance for your 2010–2015 Chevy Camaro (5th generation) 6.2L V8. Dyno tests saw increases of 19.04 HP and 16.55 ft. lb. of torque with a broad power curve.  iNTECH sealed intakes feature a unique Slip-Seal housing–filter tube interface that eliminates the use of clamps and adapters to achieve a seamless installation, while the four-layer dry air filter eliminates the use of oils that can damage MAF sensors and trigger check engine lights.

Holley designed the housing to match your Camaro’s engine compartment, including retaining factory mounting locations to enable a simple installation.

Features

  • For 2010–2015 Chevy Camaro 6.2L V8.
  • +19.04 horsepower and +16.55 foot-pounds’ torque in dyno tests.
  • Slip-Seal interface eliminates the use of hose clamps and adapters.
  • One-piece, fully sealed intake housing design guarantees a true fresh-air intake charge.
  • Factory mounting locations allow for a simple, secure installation.
  • High-flow, washable, reusable 4-layer dry performance air filter.
  • Inner and outer aluminum mesh air filter media prevents filter deformation and rust.
  • Bellows-style silicone coupler at throttle body accommodates nitrous plates or throttle body spacers without cutting the tube.
  • Enhances the look of your engine bay with a stealthy appearance.
  • Stainless steel T-bolt clamps for maximum clamping force and durability.

Holley iNTECH Cold Air Intake for Camaro 223-02

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6350029): Dual-Mode Axle-Back Exhaust for ’16-’17 Camaro SS 6.2L with NPP Quad Tip

David Ayers Leave a comment
Use This Post Clip for Email

This new Elite Series axle-back exhaust system for the 2016–2017 Camaro SS with 6.2L V8 from Hurst gives you real sound options: either powerful, aggressive sound in Track mode or a mellow tone in Stealth mode. It’s specifically engineered to fit both coupe and convertible models with the factory NPP option (identified by quad tips) and features tandem Delta 40 and Outlaw mufflers and 4” polished stainless steel tips.

Made in America from 409S stainless steel, the Hurst 6350029 includes all necessary parts and installation hardware.

Note: Though the system itself clamps on, the OE system will require cutting to remove the factory mufflers.

Features

  • For 2016–2017 Chevy Camaro SS 6.2L V8 with NPP quad tips.
  • Dual-mode operation: Track and Stealth.
  • Functional exhaust valves work with OE actuator motors to select between sound levels.
  • Stainless steel construction.
  • Dyno tuned for maximum performance.
  • Made in the USA.

Hurst Dual-Mode Axle-Back Exhaust for Camaro 6350029

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Performer RPM Hemi Gen III Cylinder Heads

David Ayers Leave a comment
Use This Post Clip for Email

Machined to be used on either the driver or passenger side of the block, Performer RPM cylinder heads for 2003+ Chrysler Hemi Gen III 6.1, 6.2, and 6.4L engines from Edelbrock are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories—including Hellcat components.

This bolt-on performance upgrade features fully CNC-machined combustion chambers and CNC-profiled bowls and port entries/exits to enhance airflow. Cast from A356 aluminum, heat treated to T6 specifications, and quality assembled by Edelbrock in the USA in Torrance, California.

Two part numbers available: 61109 (Bare Satin finish) and 61119 (Complete Satin finish).

Features

  • For 2003-to-present Chrysler Hemi Gen III 6.1, 6.2, and 6.4L.
  • More material in deck and combustion chambers for increased cylinder pressure.
  • Reinforced rocker bosses.
  • Extra material around intake/exhaust ports for porting during racing.
  • Factory-location intake/exhaust port flanges.
  • Increased seat diameters for improved heat transfer and durability over stock.
  • And much more!

Edelbrock Performer RPM Hemi Gen III Cylinder Heads

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM: Chevy Bowtie Differential Rear End Covers

David Ayers Leave a comment
Use This Post Clip for Email

Available in three different part numbers, the new Chevy bowtie rear differential covers from PROFORM ramp up performance in addition to providing outstanding good looks with their crinkled black finish. Made from CNC-milled, reinforced aluminum, these covers are designed to strengthen your rear housing in heavy torque situations. PROFORM includes two bolts to stabilize bearing main caps, magnetic drain and fluid capacity plugs, and Grade 8 mounting bolts.

Three part numbers are currently available: 141-695 (7.5 GM, 10-bolt), 141-696 (8.2/8.5 GM, 10-bolt), and 141-697 (GM, 12-bolt, passenger car).

Features

  • Made from CNC-milled aluminum.
  • Stiffens main cap area for housing flex reduction.
  • Increases gear life and decreases ring deflection.
  • Includes main cap stabilizing bolts, fluid capacity and magnetic drain plugs, and additional mounting hardware.
  • Two 10-bolt and one 12-bolt applications available.

PROFORM Chevy Bowtie Differential Rear End Covers 141-695

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RACE-GAS: Founder Dan Muldowney to Cohost Three Episodes of PowerNation

David Ayers Leave a comment
Use This Post Clip for Email

Are you familiar with RACE-GAS? If not, you’re about to get three chances to learn more!

Tune in to PowerNation the week of June 11 to see the founder and inventor of RACE-GAS, Dan Muldowney, cohost three episodes with Katie Osborne. You’ll hear the story of how and why RACE-GAS was invented, how the products are tested, and what new offerings are in the works. Get ready for some of the best automotive programming in the country!

Show Schedule

  • June 11 (Spike TV): 9–11am ET
  • June 16 (NBC Sports): 10–11pm PT
  • June 17 (CBS Sports Network): 8–10am ET

RACE-GAS Dan Muldowney on PowerNation

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-a-lite: 1000 Airmover

David Ayers Leave a comment
Use This Post Clip for Email

The new 1000 Airmover from Flex-a-lite is essential for racers who need to cool their cars quickly between rounds. It is also useful in the garage when you need to clear the air or simply desire cooling air flow while you work.

The 1000 Airmover is lightweight and compact, making it easy to pack and handle. Its high-velocity performance clocks in at 900 CFM of focused airflow, letting you direct the air where you need it most. Its low 2-amp power draw means it won’t overtax generators or trailer circuits.

Manufactured from durable injection-molded plastic, the robust 1000 Airmover will last for many years of frequent use.

Features

  • High-velocity air stream.
  • Powerful and focused 900 CFM airflow.
  • Low power draw (2 amps).
  • Multiposition operation.

Flex-a-lite 1000 Airmover

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Get $300 Back on Any New Pro-Flo 3 EFI System

David Ayers Leave a comment
Use This Post Clip for Email

Purchased individually or within an Edelbrock crate engine. Offer good via mail-in rebate on purchases made from May 1 to June 30, 2017. Click image for printable form and complete details!

 

Edelbrock 300 Dollars Back on Pro-Flo 3 EFI

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ST Suspensions: Once-a-Year Consumer Rebate

David Ayers Leave a comment
Use This Post Clip for Email

Get from $50 to $150 back, depending on product purchased. Offer good on purchases made from May 1 to June 30, 2017. Click image for printable form and complete details!

 

ST Suspensions Once a Year Consumer Rebate

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.