Category: News

Hurst (6350029): Dual-Mode Axle-Back Exhaust for ’16-’17 Camaro SS 6.2L with NPP Quad Tip

David Ayers Leave a comment
Use This Post Clip for Email

This new Elite Series axle-back exhaust system for the 2016–2017 Camaro SS with 6.2L V8 from Hurst gives you real sound options: either powerful, aggressive sound in Track mode or a mellow tone in Stealth mode. It’s specifically engineered to fit both coupe and convertible models with the factory NPP option (identified by quad tips) and features tandem Delta 40 and Outlaw mufflers and 4” polished stainless steel tips.

Made in America from 409S stainless steel, the Hurst 6350029 includes all necessary parts and installation hardware.

Note: Though the system itself clamps on, the OE system will require cutting to remove the factory mufflers.

Features

  • For 2016–2017 Chevy Camaro SS 6.2L V8 with NPP quad tips.
  • Dual-mode operation: Track and Stealth.
  • Functional exhaust valves work with OE actuator motors to select between sound levels.
  • Stainless steel construction.
  • Dyno tuned for maximum performance.
  • Made in the USA.

Hurst Dual-Mode Axle-Back Exhaust for Camaro 6350029

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Performer RPM Hemi Gen III Cylinder Heads

David Ayers Leave a comment
Use This Post Clip for Email

Machined to be used on either the driver or passenger side of the block, Performer RPM cylinder heads for 2003+ Chrysler Hemi Gen III 6.1, 6.2, and 6.4L engines from Edelbrock are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories—including Hellcat components.

This bolt-on performance upgrade features fully CNC-machined combustion chambers and CNC-profiled bowls and port entries/exits to enhance airflow. Cast from A356 aluminum, heat treated to T6 specifications, and quality assembled by Edelbrock in the USA in Torrance, California.

Two part numbers available: 61109 (Bare Satin finish) and 61119 (Complete Satin finish).

Features

  • For 2003-to-present Chrysler Hemi Gen III 6.1, 6.2, and 6.4L.
  • More material in deck and combustion chambers for increased cylinder pressure.
  • Reinforced rocker bosses.
  • Extra material around intake/exhaust ports for porting during racing.
  • Factory-location intake/exhaust port flanges.
  • Increased seat diameters for improved heat transfer and durability over stock.
  • And much more!

Edelbrock Performer RPM Hemi Gen III Cylinder Heads

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM: Chevy Bowtie Differential Rear End Covers

David Ayers Leave a comment
Use This Post Clip for Email

Available in three different part numbers, the new Chevy bowtie rear differential covers from PROFORM ramp up performance in addition to providing outstanding good looks with their crinkled black finish. Made from CNC-milled, reinforced aluminum, these covers are designed to strengthen your rear housing in heavy torque situations. PROFORM includes two bolts to stabilize bearing main caps, magnetic drain and fluid capacity plugs, and Grade 8 mounting bolts.

Three part numbers are currently available: 141-695 (7.5 GM, 10-bolt), 141-696 (8.2/8.5 GM, 10-bolt), and 141-697 (GM, 12-bolt, passenger car).

Features

  • Made from CNC-milled aluminum.
  • Stiffens main cap area for housing flex reduction.
  • Increases gear life and decreases ring deflection.
  • Includes main cap stabilizing bolts, fluid capacity and magnetic drain plugs, and additional mounting hardware.
  • Two 10-bolt and one 12-bolt applications available.

PROFORM Chevy Bowtie Differential Rear End Covers 141-695

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Newswire Parts Pro

Program Email: Read It, Know It, Sell It

David Ayers Leave a comment
Use This Post Clip for Email

Parts Pro™ creates two types of emails designed to keep you on the leading edge of important happenings and products in our industry.

The first, Newswire™, is packed with industry news, new products, educational articles, rebates and offers, and videos to make you the most knowledgeable retailer or installer in your local area. Newswire™ emails are delivered right to your inbox to read when you have time—and they are easy to view on phones when you’re on the go.

The second, Pulse™, is an as-needed email that communicates special news direct from our sponsoring manufacturers. They share exclusive information regarding authorized dealer programs, MAP pricing changes, rebates and displays, training opportunities, and more.

Click here to sign up for Newswire™ today! To also sign up for Pulse™, check the fourth box at the bottom of the form on that page (“I’m a retailer and would like to receive exclusive email communication.”) and we’ll get you on that list too.

Features

  • Free to subscribe!
  • Industry news straight to your inbox.
  • Need-to-know information from vendors.
  • Stay connected and beat the competition!

Newswire Parts Pro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RACE-GAS: Founder Dan Muldowney to Cohost Three Episodes of PowerNation

David Ayers Leave a comment
Use This Post Clip for Email

Are you familiar with RACE-GAS? If not, you’re about to get three chances to learn more!

Tune in to PowerNation the week of June 11 to see the founder and inventor of RACE-GAS, Dan Muldowney, cohost three episodes with Katie Osborne. You’ll hear the story of how and why RACE-GAS was invented, how the products are tested, and what new offerings are in the works. Get ready for some of the best automotive programming in the country!

Show Schedule

  • June 11 (Spike TV): 9–11am ET
  • June 16 (NBC Sports): 10–11pm PT
  • June 17 (CBS Sports Network): 8–10am ET

RACE-GAS Dan Muldowney on PowerNation

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Accelerator Newsletter

Newsletters: Content to Make Your Business Boom

David Ayers Leave a comment
Use This Post Clip for Email

The Accelerator™ newsletter is a free physical print piece mailed five times per year to subscribing Parts Pro™ retailers and installers. Made possible by your program warehouse distributor and dozens of sponsoring manufacturers, Accelerator™ delivers timely and informative content to help you grow your business, from articles written to help you run your outfit more effectively to tips for using our marketing tools to help you grow both customers and sales. Issues also include inserts from program vendors to keep you up to date on your favorite brands.

We’re also excited to tell you about two new features we’ve added to the newsletter. Our “Head’s Up!” column lists all the price changes (including MAP and Unilateral Pricing) that have gone into effect since the last issue. Second, the “You Don’t Know Jack!” contest tests your knowledge of one featured manufacturer using four challenging questions about that brand. Get them all right and you’ll be entered to win a free aluminum racing jack!

Features

  • Free to subscribe!
  • Effective business practices
  • Essential marketing ideas
  • Manufacturer price changes
  • Informative quizzes and inserts
  • And more!

Visit PartsPro.com to sign up or view the latest issue!

Accelerator Newsletter

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AAM Sign Shop

AAM Sign Shop: Tell Them Who You Are and What You Sell!

David Ayers Leave a comment
Use This Post Clip for Email

Think about how many businesses you drive by every day without knowing anything about them. How many more might you not even notice at all? Now think about how many potential customers drive past your store without knowing what you offer. What’s the best way to tell them about the products you sell and services you offer?

Exterior signage is one of the most cost-effective ways to communicate your presence and offerings to passing consumers. The AAM Sign Shop™ currently offers the following display elements at deeply discounted prices:

  • Feather flags
  • Retractable banner stands
  • Custom event canopies
  • Vinyl banners and lettering
  • Graphic window perfs
  • Aluminum signs
  • Mounted foamcore prints

Whatever your creative vision, the AAM Sign Shop™ gives you cost-effective display options that work in front of your store, in your store, or on the road at events and shows!

For more information, visit theaamgroup.com/sign-shop, email donnieh@theaamgroup.com, or call (423) 282-0211 x217.

AAM Sign Shop

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-a-lite: 1000 Airmover

David Ayers Leave a comment
Use This Post Clip for Email

The new 1000 Airmover from Flex-a-lite is essential for racers who need to cool their cars quickly between rounds. It is also useful in the garage when you need to clear the air or simply desire cooling air flow while you work.

The 1000 Airmover is lightweight and compact, making it easy to pack and handle. Its high-velocity performance clocks in at 900 CFM of focused airflow, letting you direct the air where you need it most. Its low 2-amp power draw means it won’t overtax generators or trailer circuits.

Manufactured from durable injection-molded plastic, the robust 1000 Airmover will last for many years of frequent use.

Features

  • High-velocity air stream.
  • Powerful and focused 900 CFM airflow.
  • Low power draw (2 amps).
  • Multiposition operation.

Flex-a-lite 1000 Airmover

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Get $300 Back on Any New Pro-Flo 3 EFI System

David Ayers Leave a comment
Use This Post Clip for Email

Purchased individually or within an Edelbrock crate engine. Offer good via mail-in rebate on purchases made from May 1 to June 30, 2017. Click image for printable form and complete details!

 

Edelbrock 300 Dollars Back on Pro-Flo 3 EFI

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.