Tag: chevy

Motive Gear (V888410): 4.10 Ratio Differential Ring and Pinion

David Ayers Leave a comment
Use This Post Clip for Email

Made from first-run steel (never recycled metal), ring and pinions from Motive Gear are perfect for dedicated racing or off-road vehicles, as they are able to handle the extreme torque generated by high-horsepower engines. These products benefit from extensive engineering, computer-controlled heat treatment, superior strength, and stringent quality-control processes conducted in Motive Gear’s in-house lab.

The V888410 4.1 ratio differential ring and pinion is designed for Chevrolet Corvette C7 applications and is backed by a 2-year/100,000 mile warranty.

Features

  • Fits: 2014–2017 Chevy Corvette C7.
  • Gear ratio: 4.1.
  • Construction: 8620 steel.
  • Ring gear rotation: standard.
  • Warranty: 2 years or 100,000 miles.

Motive Gear 4.1 Differential Ring and Pinion for Corvette

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley (223-02): iNTECH Cold Air Intake for ’10-’15 Camaro 6.2L V8

David Ayers Leave a comment
Use This Post Clip for Email

Shipping July 7, the patent-pending 223-02 iNTECH cold air intake from Holley represents the highest level of technology, style, and performance for your 2010–2015 Chevy Camaro (5th generation) 6.2L V8. Dyno tests saw increases of 19.04 HP and 16.55 ft. lb. of torque with a broad power curve.  iNTECH sealed intakes feature a unique Slip-Seal housing–filter tube interface that eliminates the use of clamps and adapters to achieve a seamless installation, while the four-layer dry air filter eliminates the use of oils that can damage MAF sensors and trigger check engine lights.

Holley designed the housing to match your Camaro’s engine compartment, including retaining factory mounting locations to enable a simple installation.

Features

  • For 2010–2015 Chevy Camaro 6.2L V8.
  • +19.04 horsepower and +16.55 foot-pounds’ torque in dyno tests.
  • Slip-Seal interface eliminates the use of hose clamps and adapters.
  • One-piece, fully sealed intake housing design guarantees a true fresh-air intake charge.
  • Factory mounting locations allow for a simple, secure installation.
  • High-flow, washable, reusable 4-layer dry performance air filter.
  • Inner and outer aluminum mesh air filter media prevents filter deformation and rust.
  • Bellows-style silicone coupler at throttle body accommodates nitrous plates or throttle body spacers without cutting the tube.
  • Enhances the look of your engine bay with a stealthy appearance.
  • Stainless steel T-bolt clamps for maximum clamping force and durability.

Holley iNTECH Cold Air Intake for Camaro 223-02

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6350029): Dual-Mode Axle-Back Exhaust for ’16-’17 Camaro SS 6.2L with NPP Quad Tip

David Ayers Leave a comment
Use This Post Clip for Email

This new Elite Series axle-back exhaust system for the 2016–2017 Camaro SS with 6.2L V8 from Hurst gives you real sound options: either powerful, aggressive sound in Track mode or a mellow tone in Stealth mode. It’s specifically engineered to fit both coupe and convertible models with the factory NPP option (identified by quad tips) and features tandem Delta 40 and Outlaw mufflers and 4” polished stainless steel tips.

Made in America from 409S stainless steel, the Hurst 6350029 includes all necessary parts and installation hardware.

Note: Though the system itself clamps on, the OE system will require cutting to remove the factory mufflers.

Features

  • For 2016–2017 Chevy Camaro SS 6.2L V8 with NPP quad tips.
  • Dual-mode operation: Track and Stealth.
  • Functional exhaust valves work with OE actuator motors to select between sound levels.
  • Stainless steel construction.
  • Dyno tuned for maximum performance.
  • Made in the USA.

Hurst Dual-Mode Axle-Back Exhaust for Camaro 6350029

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM: Chevy Bowtie Differential Rear End Covers

David Ayers Leave a comment
Use This Post Clip for Email

Available in three different part numbers, the new Chevy bowtie rear differential covers from PROFORM ramp up performance in addition to providing outstanding good looks with their crinkled black finish. Made from CNC-milled, reinforced aluminum, these covers are designed to strengthen your rear housing in heavy torque situations. PROFORM includes two bolts to stabilize bearing main caps, magnetic drain and fluid capacity plugs, and Grade 8 mounting bolts.

Three part numbers are currently available: 141-695 (7.5 GM, 10-bolt), 141-696 (8.2/8.5 GM, 10-bolt), and 141-697 (GM, 12-bolt, passenger car).

Features

  • Made from CNC-milled aluminum.
  • Stiffens main cap area for housing flex reduction.
  • Increases gear life and decreases ring deflection.
  • Includes main cap stabilizing bolts, fluid capacity and magnetic drain plugs, and additional mounting hardware.
  • Two 10-bolt and one 12-bolt applications available.

PROFORM Chevy Bowtie Differential Rear End Covers 141-695

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Quick Fuel Technology: Fabricated Aluminum Valve Covers

David Ayers Leave a comment
Use This Post Clip for Email

Available for popular Small Block or Big Block Chevy, Ford, and Mopar engines, the new race-inspired fabricated aluminum valve covers from Quick Fuel Technology are available with or without 1.25” breather openings for use with vacuum pumps or dry sump engines. These lightweight, durable valve covers are made from TIG-welded 6061 T5 sheet aluminum, with a 1/4” mounting flange, laser-etched QFT logo, and heights that clear most popular rocker arm applications. Mounting hardware included; sold in pairs.

Two finishes available: Silver Anodized or Black Coated.

Features

  • Available for popular Small Block or Big Block Chevy, Ford, and Mopar
  • 100% TIG-welded 6061 T5 aluminum.
  • 1/4” one-piece billet aluminum mounting flange.
  • Available with or without 1.25” breather openings.
  • Clear many rocker arm combinations.
  • Race-inspired, laser-etched QFT
  • Includes mounting hardware for both valve covers.
  • Sold as a pair.

Quick Fuel Technology Fabricated Aluminum Valve Covers

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (999SP): Lowering Kit for ’15-’16 Chevrolet Colorado/Canyon Ext/Crew Cab Short Bed 2WD

David Ayers Leave a comment
Use This Post Clip for Email

Designed to lower your truck +1” to -3” in the front and 4” in the rear, this all-new lowering kit with street-performance shocks from Belltech is just what you need to give your 2015–2016 Chevy Colorado or Canyon a low, aggressive stance. With all components required to properly lower your vehicle (including flip kit), this Stage 3 kit fits 2WD Extended/Crew Cab short bed Canyon/Colorado of the specified years.

Features

  • Fits 2015–2016 Chevrolet Colorado/Canyon (Ext/Crew Cab short bed 2WD).
  • Stage 3 complete solution.
  • +1” to -3” F / 4” R.
  • Street-performance shocks.

Belltech Lowering Kit for Colorado and Canyon

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Spectre Performance (900235): Air Intake Kit for ’67-’69 Camaro LS Swap

David Ayers Leave a comment
Use This Post Clip for Email

Dropping an LS engine into a 1967–1969 Chevy Camaro ranks among the most popular of today’s upgrades. To facilitate the swap, Spectre Performance offers an air intake system specially built for the classic muscle car’s engine bay and fender area that complements an LS engine and blade-style mass air flow sensor.

The 900235 puts the air filter on the passenger side of the engine compartment and includes a heat shield that attaches using existing mounting points. This air intake comes with a red Spectre Performance air filter.

Features

  • For 1967–1969 Chevrolet Camaro.
  • For use with a blade-style mass air flow sensor.
  • Polished aluminum finish.
  • Passenger side air filter position.
  • Red Spectre Performance air filter included.
  • Increases power and torque.

Spectre Performance Air Filter Kit for Camaro LS Swap 900235

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: MXP Cold Air Intake for ’12-’15 Supercharged Chevy Camaro ZL1

David Ayers Leave a comment
Use This Post Clip for Email

The MXP series cold air intake for 2012–2015 supercharged Chevrolet Camaro ZL1 with 6.2 liter engine from AIRAID features a large, one-piece, roto-molded air box that uses the OEM scoop, a massive 4.25” induction tube with billet aluminum MAF housing, premium AIRAID SynthaMax non-oiled air filter, and complete high-grade hardware. This product requires the use of aftermarket tuning due its low-restriction design, which funnels more oxygen-rich air into the engine.

Three color options are available: 251-308 (red filter), 252-308 (black filter), and 253-308 (blue filter).

Features

  • 25” induction tube with billet aluminum MAF housing.
  • Aftermarket tuning required.
  • Replaces stock intake tubing, air filter, and air box.
  • Three air filter colors: red, black, and blue.
  • Backed by AIRAID’s lifetime “no-hassle” warranty!

AIRAID MXP Cold Air Intake for Supercharged Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ARP (234-4344): ARP2000 Head Stud Kit for Chevrolet LS (2003 & Earlier)

David Ayers Leave a comment
Use This Post Clip for Email

Pro Series ARP2000 head studs for Chevy LS (2003 and earlier) from ARP, centerless ground and heat treated before thread rolling, are designed to maximize reliability and strength, with nominally rated 220K psi tensile strength.

The 234-4344 kit includes a set of twenty M11 head studs, ten M8 studs, thirty parallel-ground washers, thirty 8740 chrome-moly 12-point nuts, and ARP’s own Ultra-Torque fastener assembly lubricant.

Features

  • For 2003-and-earlier Chevy LS engines.
  • Built for strength and longevity.
  • Centerless ground and heat treated.
  • 220,000 psi tensile strength rating.

ARP (234-4344): ARP2000 Head Stud Kit for Chevrolet LS (2003 & Earlier)

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Silicone Radiator Hose Kit for 2016+ Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

Shipping this month, this silicone radiator hose kit for 2016-and-up Chevy Camaro SS Coupe from Mishimoto is made from high-grade silicone and heat-resistant embedded fibers to endure temperatures reaching 330 degrees Fahrenheit.

The kit (PN MMHOSE-CAM8-16) includes both upper and lower radiator hoses (and worm-gear clamps) and achieves many benefits for your cooling system, including efficiently reducing heat while simultaneously increasing pressure tolerance. This product is available in Black, Blue, or Red and is backed by Mishimoto’s lifetime warranty.

Features

  • Direct fit for the 2016 Chevrolet Camaro SS coupe.
  • Includes both upper and lower radiator hoses.
  • Max temperature of 330° F.
  • Made of high-grade silicone and heat-resistant embedded fibers.
  • Efficiently reduces heat and increases pressure tolerance.
  • Includes high-quality worm-gear clamps for easy installation.
  • Available in black, blue, or red.
  • Mishimoto Lifetime Warranty.

Mishimoto: Silicone Radiator Hose Kit for 2016+ Camaro SS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.