Tag: Racing

Taylor Cable Products: Firepower 9-mm Racing Ignition Wires

John Arnaud Leave a comment
Use This Post Clip for Email

Firepower 9-mm ignition wires are the lowest-resistance wire that Taylor Cable Products makes: only 25 Ohms per square foot, meaning more horsepower, torque, and spark energy for your application. Taylor achieves this feat thanks to a coated-core blend of exclusive copper-nickel alloy bonded by a conductive acrylic cover and a ZIMPLEX® silicone outer jacket that provides additional heat and abrasion protection (up to 600 degrees and 102,000 volts of dielectric strength).

Available in Black with Silver lettering, with low-profile, color-coordinated, 100% silicone PROBOOTS®.

Note: Universal-fit sets available for most American-made vehicles (no imports).

Features

  • The ultimate performance/racing ignition wire available
  • Taylor’s lowest-resistance wire: 9-mm diameter and 25 Ohms per foot
  • Ferrite spiral-wound coated core
  • Perfect for the extremes of open-wheel racing and under-hood temperatures
  • Black with Silver lettering
Taylor Cable Products Firepower 9 mm Ignition Wire 92037

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce: TRIAD DS Series 8.75” Triple Disc Clutch

John Arnaud Leave a comment
Use This Post Clip for Email

Designed specifically for vehicles requiring a holding capacity of 500–1,100 ft-lb of torque at the crank, TRIAD DS Series triple disc clutches from Centerforce offer superior clamp load and the company’s patented ball bearing–actuated pressure plate (where applicable) for light pedal effort.

The race-inspired Centerforce TRIAD clutch is equipped with organic full-facing material and a lightened billet steel flywheel for low inertia and quicker RPMs. Available in sprung or solid hub, with a 8.75” diameter designed to lower inertia for track-heavy use. Components made in the USA. Match balanced and ready for installation.

Note: Because of the TRIAD’s aggressive nature, some floater noise may be heard during operation.

Features

  • 8.75” diameter lowers inertia for track-heavy use.
  • 500–1,100 ft-lb torque at the flywheel
  • No complicated setup or adjustments
  • Centrifugally assisted diaphragm increases holding capacity with RPM.
  • Patented multi-disc floating disc and drive disc
  • Patented ball bearing pressure plate and positive drive floater
  • Precision balanced for excellent driver control
  • Includes ARP fasteners and specification card
Centerforce Triad DS Series Triple Disc Clutch

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Doug’s Headers (DEC225AK): 2.25” Electric Exhaust Cut-Outs with Hook-Up Kit (Pair)

John Arnaud Leave a comment
Use This Post Clip for Email

A new and improved version of the popular stainless steel electric exhaust cut-outs from Doug’s Headers is here, now in a 2.25” diameter for more versatile installation capability (and for a lower price!).

The DEC225AK cut-outs feature a rugged gear-reduction 12-volt DC motor and a rotating gate for a seal that prevents leaks every time the cut-out is opened or closed. Unlike butterfly-style cut-outs, these Doug’s Headers cut-outs don’t have the leaky gasket sound, and when fully opened there are no exhaust-flow obstructions. A prewired harness with an illuminated rocker switch is included for easy installation. Ideal for racetracks that don’t require mufflers, this product allows you to uncork your exhaust with the flip of a switch on your dash.

Also available in singles and in complete kits with Y-pipes.

Features

  • Uncork your exhaust with the flip of a switch from your dash.
  • Ideal for racetracks that don’t require mufflers
  • Stainless steel electric exhaust cut-outs with 2 1/4” diameters.
  • Rugged 12-volt gear-reduction DC motor and a rotating gate for a leak-proof seal
  • Prewired harness with an illuminated rocker switch for easy installation
  • Replacement motor available (#DEC950).
  • Also available in 2.5” and 3” diameters.
Doug's Headers 2.25 Inch Electric Exhaust Cut-Outs DEC225AK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RaceQuip: 712 Series 6-Point SFI 16.1 Latch and Link Harness Set

John Arnaud Leave a comment
Use This Post Clip for Email

Distinguished by a pivoting “hammer” called a Duckbill, this RaceQuip latch-and-link harness boasts cadmium-plated, drop-forged steel hardware for the perfect combination of strength and weight, with 3” premium polyester webbing and belts sewn with box-x stitching. All components comply with SFI 16.1 standards.

Using the included three-bar slide, the double-adjustable belts can be mounted by wrapping them around a rollbar or bolting them into place (snap-in ends and eyebolts sold separately).

Features

  • Exceeds SFI 16.1 rating.
  • Shoulders adjust from 20” to 62”.
  • Lap belt adjusts from 20” to 60”.
  • Premium 3” polyester webbing
  • Twin individual shoulder belts
  • Pull down–style lap belt
  • 6-point design with dual 2” crotch sub strap
  • 3” hardware ends installed.
  • Double adjustable for ease of installation
  • Wrap-around or bolt-in mounting
  • Drop-forged steel hardware
RaceQuip 712 Series 6 Point SFI 16.1 Latch and Link Harness Set

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Cloyes: Z-Series Racing Timing Chain

John Arnaud Leave a comment
Use This Post Clip for Email

Offering 33% more overall strength than the company’s current premium chain, Cloyes’ Z-Series racing timing chain is the most durable and dependable chain available today—and the number-one choice of top professional teams in sprint, circle, track, drag, and off-road racing.

Double-roller Z-Series chains are forged from high-strength steel hardened with a proprietary heat treatment developed by Cloyes. They feature fine-blanked links that reduce severe-load stress fractures and press-fit center links that improve load share and reduce load spikes on any single component.

Z-Series racing timing chains are THE choice for extreme custom engine builds that can’t tolerate compromise.

Features

  • 33% more overall strength than Cloyes’ current premium chain
  • Made from high-strength steel with proprietary heat-treat processing
  • Fine-blanked links reduce stress fractures under severe load.
  • Press-fit center links improve load share by reducing load spikes on any single component and providing greater overall strength.
Cloyes Z-Series Racing Timing Chain 9-131Z

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter (6035): Updated UI for DashLink OBD-II Gauge System (iOS/Android)

John Arnaud Leave a comment
Use This Post Clip for Email

The award-winning DashLink software from AutoMeter Products has received a UI (user interface) redesign. Everything you love about DashLink is still there—now it’s just cleaner, faster, and simpler to use. Plus, the upgrade is free to existing users of the system!

DashLink creates a virtual dashboard for your vehicle on your iOS or Android device using the AutoMeter DashLink app. Using your phone, you can monitor and data log engine and vehicle performance (including fuel economy) and instantly read and clear troublesome check engine lights, among numerous other capabilities. A plug-and-play interface simplifies installation.

Features

  • Display: Feature the gauges you want on your iOS or Android device.
  • Data log: Record and play back log files showing OBD-II and acceleration data.
  • Peak recall: Built-in recall lets you view maximum values at your convenience.
  • Skid pad: Show lateral and accel/braking Gs with min/max indicators.
  • Rainbow track map: Visualize your location, acceleration, and braking as you drive laps. Compare different laps to see how acceleration and braking changed.
  • Inclinometer: Monitor the pitch and roll of your vehicle for off-road use.
  • Support for OBD-II diagnostics: Read and clear diagnostic trouble codes (DTCs).
  • Averages: Determine average fuel consumption, vehicle speed, boost pressure, or any other monitored parameter.
  • Trip computer: Maintains stats for up to five trips.
  • And much more!
AutoMeter Updated UI for DashLink OBDII Gauges 6035

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RaceQuip: PRO15 Top Air Snell SA2015 Helmet

John Arnaud Leave a comment
Use This Post Clip for Email

With a top air inlet and SA2015 rating, the PRO15 helmet from RaceQuip combines contemporary styling with modern production techniques. The hand-laid fiber reinforced polymer shell achieves an outstanding balance of lightweight comfortability and affordability, and the design accommodates HANS or other head and neck restraint device anchor posts (not included) thanks to the installed M6 threaded inserts.

Fresh air hoses attach to the top via a standard 1.25” barbed fitting; air then flows across the face shield, which is made from 3mm distortion-free polycarbonate supported by an aluminum pivot kit, hand-ratcheting TearOff posts, and a silicone gasket to seal out dirt; the eye port is wide enough to allow for personal eyewear and provides good peripheral vision.

Suitable for use in all forms of motorsports. Available in Gloss White and Flat Black in sizes ranging from Small to XXL.

Features

  • Fiber-reinforced polymer (FRP) shell.
  • HANS/HNR M6 threaded inserts in shell.
  • Accepts standard 1.25” round hose.
  • Air is routed under shell and across face shield.
  • Expanded polystyrene (EPS) liner.
  • Comfort-fit blended Nomex interior.
  • HANS anchor posts bolt right on (not included).
  • Distortion-free 3mm polycarbonate shield.
  • Aluminum pivot kit with adjustable friction lock.
  • Tear-off posts hand ratchet to eight positions.
  • Silicone eye port gasket seals out dirt.
  • Kevlar chin strap.
  • Great peripheral vision.
  • Fire retardant paint and interior.
  • Slick aerodynamic design with chin spoiler.
  • Two colors: Gloss White and Flat Black.
  • Sizes: S–2XL.

RaceQuip PRO15 Top Air Snell SA2015 Helmet

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products: Equus Contender Race Panels

John Arnaud Leave a comment
Use This Post Clip for Email

Equus Contender race panels from AutoMeter help you monitor your race car’s critical engine performance functions without breaking the bank. Each highly visible panel includes a set of 2-5/8” gauges with easy twist-on mounting rings, backlit illumination, and lightweight construction. They feature full-sweep mechanical movement and the necessary warning switches, fittings, and installation components for domestic V8 applications (braided line and fuel isolator not included).

Every AutoMeter Equus Contender kit also includes a durable aluminum panel with indicator lights matched to each gauge that illuminate to warn the driver in cases of low oil pressure, high water or oil temperature, or low carburated fuel pressure (depending on panel model chosen).

Models

  • E8400P: Gauges for oil pressure and water temp.
  • E8401P: Gauges for oil pressure, water temp, and fuel pressure.
  • E8402P: Gauges for oil pressure, water temp, and oil temp.
  • E8403P: Gauges for oil pressure, water temp, oil temp, and fuel pressure.
AutoMeter Equus Contender Race Panel E8403P

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Redhorse Performance: 900 Series Nitrous System Hose Assemblies

John Arnaud Leave a comment
Use This Post Clip for Email

Constructed from PTFE tubing and rugged stainless steel outer braids, 900 Series nitrous system hose assemblies from Redhorse Performance are hydraulically crimped to exacting standards to guarantee performance and safety.

All lines have straight female hose ends (-04AN or -06AN) on each side in Blue, Black, or Red; they are also available in various lengths to suit your application.

Features

  • PTFE tubing and stainless steel outer braids.
  • Hydraulically crimped for performance and safety.
  • -04AN or -06AN straight female ends on each side.
  • End colors: Blue, Black, or Red.

Redhorse Performance 900 Series Nitrous System Hose Assemblies

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RaceQuip: VESTA15 America Helmet

John Arnaud Leave a comment
Use This Post Clip for Email

Scheduled to hit the track October 1, the RaceQuip America helmet is based on the outstanding VESTA15 SA2015 platform, except it features an American flag graphic treatment. These helmets are hydro-dipped and then clear-coated for a durable, shiny finish. VESTA15 highlights include:

Features

  • Exceeds Snell SA2015 rating (sticker inside).
  • Fiber-reinforced polymer (FRP) shell.
  • HANS / HNR M6 threaded inserts in shell.
  • Expanded polystyrene (EPS) liner.
  • Comfort-fit blended Nomex interior.
  • HANS anchor posts bolt right on (not included).
  • Distortion-free 3mm polycarbonate shield.
  • Aluminum pivot kit with adjustable friction lock.
  • Tear-off posts hand-ratchet to eight positions.
  • Silicone eyeport gasket seals out dirt.
  • Kevlar chin strap and great peripheral vision.
  • Fire-retardant paint and interior.
  • Aerodynamic profile with chin spoiler.
  • Available in sizes S to 2XL.

RaceQuip VESTA15 America Helmet

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.