SCT: Burst Electronic Throttle Enhancement Device

David Ayers Leave a comment
Use This Post Clip for Email

If you’re craving a few more Gs in your seat, pick up the SCT Burst to kick up your vehicle’s throttle response and driving characteristics. The Burst installs in just 10 minutes by plugging inline between your ride’s pedal position sensor and harness. Then with the turn of the simple control knob, you’ll be able to adjust your throttle on the fly—giving you that extra “burst” just when you need it. SCT designed the Burst to be fully waterproof with OE-quality connectors. Enjoy extra power that will not void your vehicle’s warranty, with live technical support and plug-and-play convenience. Made in the USA!

Features

  • Improves acceleration and reduces lag time
  • Plug-and-play installation in just 10 minutes
  • On-the-fly adjustments with intuitive control knob
  • Weatherproof design
  • Live technical support
  • Will not void your vehicle’s warranty
  • Made in the USA
SCT Burst

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ST Suspensions (27327019): ST Adjustable Lowering Springs for 2011+ Dodge Challenger/Charger

David Ayers Leave a comment
Use This Post Clip for Email

Get low and go fast with ST adjustable lowering springs from ST Suspensions. Designed for 2011-and-up Dodge Challenger and Charger without electronic suspension (Monroe dampers), the 27327019 kit is an alternative to standard springs, allowing you to adjust the height of your car even after installation—which means you can dial in a height to match your wheel and tire combination. This modification will improve steering behavior and agility while perfectly complementing your OE dampers.

Features

  • For 2011+ Dodge Challenger/Charger without electronic suspension (Monroe dampers)
  • Adjust ride height even after installation
  • Dial in height to match custom wheel and tire combinations
  • Improves steering behavior and agility
  • Matches OE dampers
ST Suspensions Adjustable Lowering Springs for 2011 Challenger_Charger 27327019

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66985): Heavy-Duty Stud-Mount Billet Distributor Clamp for Chevy V6/V8

David Ayers Leave a comment
Use This Post Clip for Email

Amp up the aftermarket swagger of your engine with this heavy-duty stud-mount billet distributor clamp from PROFORM. Made from quality aluminum with a machined finish, the stout 66985 clamp fits Chevy V6 and V8 engines and includes the stud, nut, and washer for installation. Sold in singles.

Features

  • For Chevy V6 and V8 engines
  • Quality aluminum with a machined finish
  • Heavy-duty stud-mount model
  • Includes stud, nut, and washer
  • Sold individually
PROFORM Heavy Duty Stud Mount Billet Distributor Clamp for Chevy V6_V8 66985

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Season’s Greetings from Parts Pro

David Ayers Leave a comment
Use This Post Clip for Email

In a year filled with unprecedented challenges, at least one gift has been made clear: the opportunity to come together to get through them.   

Everyone at Parts Pro wishes you and your employees, families, and communities all the warmth and goodwill that comes this time of year. Thank you for being a part of our family. 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RaceQuip: PRO20 Snell SA2020 Full-Face Helmets

David Ayers Leave a comment
Use This Post Clip for Email

PRO20 full-face helmets from RaceQuip combine contemporary styling and modern production techniques to provide outstanding protection and value suitable for all forms of motorsports (Snell2020 rating).

The PRO20 design includes a strong, lightweight, FRP composite shell; reinforced M6 threaded HANS/HNR inserts (anchor posts not included); hook-and-loop cheek pads; distortion-free, eyewear-capable 3 mm polycarbonate faceshield; silicone eyeport gasket to seal out dirt; medium-sized chin spoiler; and a comfort-fit, blended Nomex interior with exhaust vents at top and back to help you keep your cool.

Available in Gloss Black, White, or Steel; Flat Black; Hot Pink; Corsa Red; America; and Carbon Fiber in sizes 2XS–3X.

Features

  • Snell2020 rated
  • FRP composite shell
  • Reinforced M6 threaded HANS/HNR inserts (anchor posts not included)
  • 3 mm polycarbonate faceshield accommodates personal eyewear and provides good peripheral vision.
  • Silicone eyeport gasket keeps out dirt.
  • Comfort-fit, blended Nomex interior
  • Top and back thermal exhaust ports
  • 8 colors: Gloss Black, Gloss White, Gloss Steel, Flat Black, Hot Pink, Corsa Red, America, and Carbon Fiber
  • 8 sizes: 2XS, XS, S, M, L, XL, 2XL, and 3XL
RacqQuip PRO20 Snell SA2020 Full Face Helmets

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

HushMat (20300): Silencer Megabond Foam Under-Carpet Floor Kit

David Ayers Leave a comment
Use This Post Clip for Email

Silencer Megabond 1/2” foam from HushMat helps absorb and eliminate unwanted heat and airborne noise to provide a quiet, modern ride for your aftermarket build. The American-made material is specially designed to intercept and deaden high-frequency noise like engine growl, exhaust drone, and road/wind whoosh. HushMat Silencer Megabond foam performs a function similar to that of foam on the ceiling and walls of a recording studio, reducing the noise level in your vehicle by up to 15 decibels.

This advanced material also works to reduce the transfer of engine, header, manifold, and exhaust heat to your metal firewall/floor and prevent it from cooking your cabin; in fact, it is proven to lower thermal transfer into vehicle interiors by more than 70%. This significant reduction produces a more comfortable experience and means your AC system doesn’t have to work as hard.

The 20300 HushMat kit includes two 23” x 36” (11.5 sq ft each) peel-and-stick sheets of foam that cuts with scissors and is designed to be applied under carpet on floor, firewall, and trunk. Also available in 1/4” thickness for door panels and headliners and 1/8” thickness for back of plastic panels or glove box/console lining. Get it in bulk rolls, too!

Features

  • Abrasion-resistant, semi–closed cell sound- and thermal-insulating foam
  • Flexible material designed to last the life of your vehicle or boat.
  • Absorbs wind and engine, road and tire, and exhaust noise up to 4,000 Hz
  • Thermal insulation up to 300 degrees Fahrenheit (70% heat reduction)
  • Peel-and-stick sheets cut with scissors
  • 1/2” thickness goes under carpet on floor, firewall, and trunk.
  • Includes two 23” x 36” sheets; also available in bulk rolls
  • Manufactured in the USA
HushMat Silencer Megabond Foam 20300

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Royal Purple: HPS® Series High Performance Engine Oil

David Ayers Leave a comment
Use This Post Clip for Email

Fortified with a high level of zinc/phosphorus anti-wear additive, HPS® series motor oil from Royal Purple is designed to maximize the performance and meet the demands of high performance and modified engines. When combined with Royal Purple’s proprietary Synerlec® additive, this formulation outperforms leading synthetic and conventional lubricants in gasoline and diesel engines.

HPS® engine oil offers exceptionally high film strength to dramatically reduce engine and valve train wear and heat, all while improving the piston ring/cylinder wall seal to maximize base HP/torque and optimize fuel economy. Outstanding oxidation stability extends oil life to save you time and money. The formulation also reduces deposits to keep your engine clean and offers superior corrosion protection.

Available in a variety of sizes in the following viscosities: 5W-20, 5W-30, 10W-30, 10W-40, and 20W-50.

Note: Recommended for vehicles no longer under warranty and for those seeking greater performance and protection.

Features

  • Exceptionally high film strength to reduce engine wear and heat
  • Extends the life of your engine oil
  • Improves piston/cylinder seal to maximize horsepower, torque, and fuel economy
  • Enhanced oxidation stability extends oil life and allows for more miles driven between changes
  • Reduces engine deposits and keeps engines clean
  • Protects valve train components, including performance roller lifter and high-lift flat-tappet camshafts/lifters
  • Superior corrosion protection
Royal Purple HPS High Performance Engine Oil

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: Trail Performance Shocks for Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

Belltech has added to its Trail Performance line to include premium ride-quality shocks for 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL. Tuning and low-speed compression characteristics were a top priority here, leading to advanced control of pitch and roll, dive and squat to keep trail blazers confident and in control.

Belltech included two-way, independent adjustable technology in the form of 18 clicks of rebound tuning and 12 clicks of compression damping, letting drivers alter the Trail Performance shocks to perform at the highest expectancy on any terrain. The setup especially complements large, aggressive, off-road tires, maintaining a smooth, stable, in-control ride.

Available rear and front for 0”–2.5” and 4” lifts for JK and JL.

Features

  • For 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL
  • Premium ride quality
  • Advanced control of pitch and roll, dive and squat
  • Two-way, independent adjustable technology
  • +/- 18 clicks rebound adjustment
  • +/- 12 clicks compression adjustment
  • Perfect for large, aggressive, off-road tires
Belltech Performance Trail Shocks for Jeep Wrangler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products (2132): Direct-Fit Replacement Dash for ’70-’78 Camaro, 3 3/8” & 2 1/16”

David Ayers Leave a comment
Use This Post Clip for Email

Simplify the original dash replacement of your 1970–1978 Chevrolet Camaro with the 2132 upgrade from AutoMeter Products. Designed to house quality AutoMeter gauges, this replacement dash panel is made in the USA from durable, thermoformed, UV-protected ABS plastic, complete with a high-quality finish sure to complement your Camaro’s interior.

Fits two 3 3/8” instruments and four 2 1/16” gauges.

Features

  • For 1970–1978 Chevy Camaro
  • Direct-fit replacement dash panel
  • Accommodates two 3 3/8” instruments and four 2 1/16 gauges
  • Thermoformed, UV-protected ABS material
  • Quality finished
  • Made in the USA
AutoMeter Products Direct Fit Replacement Dash Panel for 70-78 Camaro 2132

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite (116323): Remote-Mount Stacked-Plate 32-Row Engine-Oil Cooler with Electric Fan

David Ayers Leave a comment
Use This Post Clip for Email

The new line of engine-oil coolers from Flex-A-Lite provides up to four times the heat rejection of typical low-cost coolers. These modern designs are efficient and offer the optimal performance you expect from Flex-A-Lite.

By itself, engine coolant isn’t enough to protect engine oil and internal components in harsh conditions. Designed for remote mounting, the 116323 Flex-A-Lite cooler uses turbulized fins inserted into internal cooling plates and louvered fins to transfer heat into the air. Its thick core minimizes oil-pressure drop through the cooler while maximizing heat transfer.

Comes mounted with a 6.5” electric fan and includes -8, -10, and -12 interchangeable AN fittings with O-rings. Measures 11” x 11” x 4.25” overall.

Features

  • Equipped for remote mounting
  • Comes with mounted 6.5” electric fan
  • Maximal heat transfer
  • Includes -8, -10, and -12 interchangeable AN fittings with O-rings
  • Dimensions: 11” x 11” x 4.25”
Flex-A-Lite Remote Mount Stacked Plate 32 Row Engine Oil Cooler with Electric Fan 116232

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.