Tag: Flaming River

Flaming River (FR1515MU15): Manual Rack and Pinion for ’15-’20 Ford Mustang (S550)

David Ayers Leave a comment
Use This Post Clip for Email

Engineered to reduce vehicle weight by 10–15 pounds, this manual rack and pinion is Flaming River’s answer to customer demand! Designed for 2015–2020 Ford Mustang (S550), the FR1515MU15 rack and pinion achieves its weight advantage by eliminating hoses, pulleys, and pumps. In addition, the billet aluminum mounting brackets can be adjusted to modify the piston angle for large tube headers and engine swaps in custom applications. Bolts into the same mounting location as the OEM Power Rack.

Note: requires Flaming River 9/16” -26 U-joint for installation (FR1709DD).

Features

  • For 2015–2020 Ford Mustang (S550)
  • 10–15 lb lighter than factory Mustang power system
  • Bolts into same mounting locations as OEM Power Rack
  • 51 1/2” overall length
  • 30” pivot point
  • 13” mounts center to center
  • 1/2” diameter mounting holes
  • 9/16” -26 spline pinion shaft
  • 12.11” inner ends (M14x1.5 male – M16x1.5 male)
  • Warranty: 1 year
Flaming River FR1515MU15 Manual Rack and Pinion for 15-20 Ford Mustang

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR40200KT): Microsteer Electric Power Steering Kit with Speed Sensor

David Ayers Leave a comment
Use This Post Clip for Email

The Flaming River Microsteer universal electric power-assisted steering system can easily be fitted to any vehicle, without needing to change your steering rack or fitting a hydraulic system. Using the mode-selection switch found on the unique Microsteer Tuning Box, you can adjust the amount of assistance manually (by using a rotary potentiometer) or using wheel speed (by connecting a wheel speed signal). The FR40200KT Flaming River kit includes a speed sensor for this purpose.

Kit also includes a motor/gearbox, ECU, and wiring harness.

Features

  • Universal fitment
  • Doesn’t require changing your steering rack or installing a hydraulic system
  • Adjust steering assist manually or via speed sensor
  • FR40200S speed sensor included
Flaming River FR40200KT Microsteer Electric Power Steering Kit with Speed Sensor

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR313KTK): Power Rack & Pinion Cradle Kit for ’68-’72 Chevelle/El Camino

David Ayers Leave a comment
Use This Post Clip for Email

Reduced bump steer is the calling card of this power rack and pinion cradle kit from Flaming River, thanks to a unique TravelBar system that connects new tubular inner tie-rod ends to original pivot points. Aficionados of 1968–1972 Chevy Chevelle and El Camino will want to jump on this upgrade, as will owners of sister GM intermediates of the same period such as Pontiac GTO/Lemans, Oldsmobile 4-4-2/Cutlass, Buick GS/Skylark, and the GMC Conquistador.

Flaming River designed the FR313KTK rack and pinion cradle kit to install in the stock steering system mounting holes—no drilling, cutting, or welding required. This precision jig-welded setup comes with lifetime serviceability, a paintable tilt key column, Billet-Joint and column adapter, stronger 1” rack gear, wiring connector, mounting hardware, and more.

Features

  • For Chevrolet Chevelle/El Camino and other sister GM intermediates with SBC or BBC engines
  • All-new power rack and pinion with lifetime serviceability
  • Billet-Joint and column adapter
  • Stronger 1” rack gear
  • 6” travel and full turning radius
  • Paintable tilt key column
  • Mounting hardware, wiring connector, and universal joints
  • Power steering pump and pulley
  • Aluminum mounting reservoir (hoses sold separately)
  • Billet swivel floor mount
  • Bolts into existing chassis with no suspension modification
Flaming River Power Rack & Pinion Kit for Chevelle_El Camino

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River: 17” Collapsible Gearshift Micro Column – Paintable Mill

David Ayers Leave a comment
Use This Post Clip for Email

Measuring only 17” long, the new collapsible gearshift micro column with laser-cut diamond pattern from Flaming River allows for optimal clearance in your custom build. In fact, this tilt column came to life by request of an Australian builder, who wanted the added safety of the collapsible feature and asked Flaming River if they would create it.

The FR20020MCLC model features a paintable mill finish; other finishes available. Though the idea is Australian, this product is made in the USA!

Features

  • Collapsible design measures only 17” long.
  • Stainless steel construction, all-new components
  • Available in a variety of finishes
  • Warranty: 3 years
Flaming River 17 Inch Collapsible Gearshift Micro Column FR20020MCLC

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR60004) Programmable RFID Keyless Ignition System Dash Mount

David Ayers Leave a comment
Use This Post Clip for Email

Flaming River has a new addition to its Keyless Ignition Systems that’s hands free and more convenient. The Programmable Ignition System Dash Mount uses RFID proximity technology to automatically authorize your vehicle to start.

This new system is fully programmable, allowing you to use your keyless entry or trunk release system, door poppers as well as other popular remotely-controlled accessories. The system can stand alone or be integrated into any of Flaming River’s tilt columns in a paintable, black powdercoated, or polished finish.

This new system has several security features to give you convenience and peace of mind. It has an emergency bypass mode allowing for the vehicle to be started using a unique pin number, and it has a security lockout feature preventing the system from being activated when the key fob is inside of the proximity range.

  • Programmable, keyless ignition system
  • RFID proximity technology to automatically authorize vehicle start
  • System can stand alone or be integrated into any of Flaming River’s tilt columns
  • Paintable, black powder-coated, or polished finish.
  • Additional security features

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR21027): 32” Direct-Fit Floor Shift Tilt Column with 1” DD for ’67-’68 Camaro

David Ayers Leave a comment
Use This Post Clip for Email

The FR21027 direct-fit floor shift tilt column from Flaming River has an OEM-style mount that fits the original dash in a 1967–1968 Camaro, highlighted by a compact shroud that creates a unique new custom look. Each column comes with a billet dress-up kit (tilt/turn signal levers and hazard knob), GM wiring (4.25” connector), and an all-new canceling cam.

With its paintable mill finish and 1” DD, this is no rebuilt junkyard column: it’s a Flaming River–engineered column made with all-new components in the USA.

Features

  • For 1967–1968 Chevy Camaro
  • Direct-fit floor shift tilt column
  • OEM-style mount fits original dash.
  • Billet dress-up kit (tilt/turn signal levers and hazard knob)
  • 4.25” GM connector, new canceling cam, and 1” DD
  • Paintable mill finish
  • Made in the USA
Flaming River Floor Shift Tilt Column for 67-68 Camaro FR21027

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR1063): 2-Gauge Battery Relocation Kit

David Ayers Leave a comment
Use This Post Clip for Email

The new FR1063 battery relocation kit from Flaming River comes with a 20-foot 2-gauge positive cable and an 8-foot 2-gauge ground cable, both flexible, soft, and easy to work with. They are rated for 250 amps and have ultra-fine 100% copper conductor strands for low resistance and flexibility. Special braiding and a soft jacket make these cables extra flexible and easy to use, while heavy-duty copper ends simplify the installation process. Flaming River has included all hardware required for installation.

Features

  • 50% lighter than standard 2-gauge cables
  • 100% copper conductor strands for low resistance and flexibility
  • Rated for 250 amps
  • Special braiding and a soft jacket for easy-to-use flexibility
  • All necessary hardware included
Flaming River 2 Gauge Battery Relocation Kit FR1063

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR40037): Power Rack and Pinion for ’79-’93 Fox-Body Mustang

David Ayers Leave a comment
Use This Post Clip for Email

The FR40037 replacement power rack and pinion from Flaming River is precision robot welded for superior strength, durability, and fit. Designed specifically for the 1979–1993 Fox-body Ford Mustang, this product features the same line position as OEM as well as adjustable pinion housing for easy installation.

Proudly made in the USA—and fluid/pressure tested and certified before leaving the Flaming River facility—this power rack and pinion is popular with many top chassis builders.

Features

  • For 1979–1993 Ford Mustang (Fox body, same line position)
  • All-new components: valve, piston, seals, bearings and bushings, and pinion and rack gears
  • Robotically welded for strength and durability
  • Stainless steel braided hoses
  • Full turning radius and 6” of travel
  • 12:1 ratio/2.5 turns lock-to-lock
  • Made in the USA
  • Lifetime serviceability
Flaming River Power Rack and Pinion for 79-93 Fox Body Mustang FR40037

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR40200): Microsteer Universal Electric Power Steering

David Ayers 1 Comment
Use This Post Clip for Email

Offering universal electric power-assisted steering, the FR40200 Microsteer kit from Flaming River easily fits virtually any vehicle—without the need to change the steering rack or fit a hydraulic system in place of the existing manual system.

The unique Microsteer tuning box lets you adjust steering assistance by using a rotary potentiometer, or you can make the system speed-sensitive by connecting a wheel speed signal to the tuning box, which includes a mode-selection switch for toggling between the two.

Includes motor/gearbox (MGU), electronic control unit (ECU), tuning box, and wiring harness.

Features

  • Universal electric power steering conversion
  • Eliminates the need to change the steering rack or fit a hydraulic system.
  • Two adjustment methods: manual rotary dial and wheel speed signal
  • Hall Effect–type sensor recommended (and sold separately).
  • 11/16”-36 input/output shafts
Flaming River Microsteer Electric Power Steering FR40200

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR20302): VDOG™ Variable Angle Gear

David Ayers Leave a comment
Use This Post Clip for Email

Named the Best New Street Rod Product and Best Engineered New Product at SEMA 2018, the VDOG™ variable angle gear from Flaming River is driven without any chains or sprockets and can be mounted vertically or horizontally—a trait ideal for cab-over applications, T-buckets, and specialty builds with big motors and tight firewall clearance.

Made in the USA with a cast aluminum housing and a ¾-36 output shaft compatible with universal joints. Billet housing option available.

Features

  • Cast model can be powder coated any color from the Flaming River RAL deck.
  • 90° gear box with a 35° variable angle shaft.
  • Articulating ball design for maximum adjustability.
  • 1:1 ratio maintains rack and pinion or steering box gear ratio.
  • Can be mounted vertically or horizontally.
  • All gear drive—no chains or sprockets.
  • Billet housing option available.
  • Made in the USA.
Flaming River VDOG Variable Angle Gear FR20302_June 2019

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.