Category: Industry

HushMat (20300): Silencer Megabond Foam Under-Carpet Floor Kit

David Ayers Leave a comment
Use This Post Clip for Email

Silencer Megabond 1/2” foam from HushMat helps absorb and eliminate unwanted heat and airborne noise to provide a quiet, modern ride for your aftermarket build. The American-made material is specially designed to intercept and deaden high-frequency noise like engine growl, exhaust drone, and road/wind whoosh. HushMat Silencer Megabond foam performs a function similar to that of foam on the ceiling and walls of a recording studio, reducing the noise level in your vehicle by up to 15 decibels.

This advanced material also works to reduce the transfer of engine, header, manifold, and exhaust heat to your metal firewall/floor and prevent it from cooking your cabin; in fact, it is proven to lower thermal transfer into vehicle interiors by more than 70%. This significant reduction produces a more comfortable experience and means your AC system doesn’t have to work as hard.

The 20300 HushMat kit includes two 23” x 36” (11.5 sq ft each) peel-and-stick sheets of foam that cuts with scissors and is designed to be applied under carpet on floor, firewall, and trunk. Also available in 1/4” thickness for door panels and headliners and 1/8” thickness for back of plastic panels or glove box/console lining. Get it in bulk rolls, too!

Features

  • Abrasion-resistant, semi–closed cell sound- and thermal-insulating foam
  • Flexible material designed to last the life of your vehicle or boat.
  • Absorbs wind and engine, road and tire, and exhaust noise up to 4,000 Hz
  • Thermal insulation up to 300 degrees Fahrenheit (70% heat reduction)
  • Peel-and-stick sheets cut with scissors
  • 1/2” thickness goes under carpet on floor, firewall, and trunk.
  • Includes two 23” x 36” sheets; also available in bulk rolls
  • Manufactured in the USA
HushMat Silencer Megabond Foam 20300

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Royal Purple: HPS® Series High Performance Engine Oil

David Ayers Leave a comment
Use This Post Clip for Email

Fortified with a high level of zinc/phosphorus anti-wear additive, HPS® series motor oil from Royal Purple is designed to maximize the performance and meet the demands of high performance and modified engines. When combined with Royal Purple’s proprietary Synerlec® additive, this formulation outperforms leading synthetic and conventional lubricants in gasoline and diesel engines.

HPS® engine oil offers exceptionally high film strength to dramatically reduce engine and valve train wear and heat, all while improving the piston ring/cylinder wall seal to maximize base HP/torque and optimize fuel economy. Outstanding oxidation stability extends oil life to save you time and money. The formulation also reduces deposits to keep your engine clean and offers superior corrosion protection.

Available in a variety of sizes in the following viscosities: 5W-20, 5W-30, 10W-30, 10W-40, and 20W-50.

Note: Recommended for vehicles no longer under warranty and for those seeking greater performance and protection.

Features

  • Exceptionally high film strength to reduce engine wear and heat
  • Extends the life of your engine oil
  • Improves piston/cylinder seal to maximize horsepower, torque, and fuel economy
  • Enhanced oxidation stability extends oil life and allows for more miles driven between changes
  • Reduces engine deposits and keeps engines clean
  • Protects valve train components, including performance roller lifter and high-lift flat-tappet camshafts/lifters
  • Superior corrosion protection
Royal Purple HPS High Performance Engine Oil

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: Trail Performance Shocks for Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

Belltech has added to its Trail Performance line to include premium ride-quality shocks for 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL. Tuning and low-speed compression characteristics were a top priority here, leading to advanced control of pitch and roll, dive and squat to keep trail blazers confident and in control.

Belltech included two-way, independent adjustable technology in the form of 18 clicks of rebound tuning and 12 clicks of compression damping, letting drivers alter the Trail Performance shocks to perform at the highest expectancy on any terrain. The setup especially complements large, aggressive, off-road tires, maintaining a smooth, stable, in-control ride.

Available rear and front for 0”–2.5” and 4” lifts for JK and JL.

Features

  • For 2007–2017 Jeep Wrangler JK and 2018–2020 Jeep Wrangler JL
  • Premium ride quality
  • Advanced control of pitch and roll, dive and squat
  • Two-way, independent adjustable technology
  • +/- 18 clicks rebound adjustment
  • +/- 12 clicks compression adjustment
  • Perfect for large, aggressive, off-road tires
Belltech Performance Trail Shocks for Jeep Wrangler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products (2132): Direct-Fit Replacement Dash for ’70-’78 Camaro, 3 3/8” & 2 1/16”

David Ayers Leave a comment
Use This Post Clip for Email

Simplify the original dash replacement of your 1970–1978 Chevrolet Camaro with the 2132 upgrade from AutoMeter Products. Designed to house quality AutoMeter gauges, this replacement dash panel is made in the USA from durable, thermoformed, UV-protected ABS plastic, complete with a high-quality finish sure to complement your Camaro’s interior.

Fits two 3 3/8” instruments and four 2 1/16” gauges.

Features

  • For 1970–1978 Chevy Camaro
  • Direct-fit replacement dash panel
  • Accommodates two 3 3/8” instruments and four 2 1/16 gauges
  • Thermoformed, UV-protected ABS material
  • Quality finished
  • Made in the USA
AutoMeter Products Direct Fit Replacement Dash Panel for 70-78 Camaro 2132

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite (116323): Remote-Mount Stacked-Plate 32-Row Engine-Oil Cooler with Electric Fan

David Ayers Leave a comment
Use This Post Clip for Email

The new line of engine-oil coolers from Flex-A-Lite provides up to four times the heat rejection of typical low-cost coolers. These modern designs are efficient and offer the optimal performance you expect from Flex-A-Lite.

By itself, engine coolant isn’t enough to protect engine oil and internal components in harsh conditions. Designed for remote mounting, the 116323 Flex-A-Lite cooler uses turbulized fins inserted into internal cooling plates and louvered fins to transfer heat into the air. Its thick core minimizes oil-pressure drop through the cooler while maximizing heat transfer.

Comes mounted with a 6.5” electric fan and includes -8, -10, and -12 interchangeable AN fittings with O-rings. Measures 11” x 11” x 4.25” overall.

Features

  • Equipped for remote mounting
  • Comes with mounted 6.5” electric fan
  • Maximal heat transfer
  • Includes -8, -10, and -12 interchangeable AN fittings with O-rings
  • Dimensions: 11” x 11” x 4.25”
Flex-A-Lite Remote Mount Stacked Plate 32 Row Engine Oil Cooler with Electric Fan 116232

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66776): 1,000 LB Digital Valve Spring Tester

David Ayers Leave a comment
Use This Post Clip for Email

For the most accurate spring-pressure checks, look no further than the new billet-aluminum, 1,000 lb, digital bench top spring tester from PROFORM. The red-anodized 66776 tester checks springs up to 1.9” diameter and 3.875” tall in 1 lb increments, with a backlit display to aid in low-light conditions. Peak hold and automotive shutoff round out the features.

Features

  • Red-anodized aluminum and backlit digital readout
  • 1,000 lb rating; reads in 1 lb increments
  • Checks springs up to 1.9” in diameter and 3 7/8” tall
  • Peak hold and auto shutoff functions
  • Sold individually
PROFORM 1000 lb Digital Valve Spring Tester 66776

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Taylor Cable Products (661000): Ready-to-Run Vertex Distributor

David Ayers Leave a comment
Use This Post Clip for Email

With its simple, three-wire connector, this ready-to-run Vertex distributor from Taylor Cable Products is ideal for street or track applications. The 661000 model features an adjustable vacuum that adds 10 degrees of advance, a machine-polished aluminum housing, solid brass terminals, a compact footprint that allows more clearance around the intake manifold, and a high performance circuit board for up to 9,000 RPM.

Features

  • For Chevy BB (396-454) and SB (262-400) engines
  • Potted aluminum housing with premium epoxy encase
  • Primary and secondary winding
  • Protects coil’s internal components
  • Alkyd tower and brass coil terminals
  • No carbon tracking
  • Spacing prevents arcing to ground
  • High performance circuit board for up to 9K RPM
Taylor Cable Products Ready to Run Vertex Distributor 661000

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River: 17” Collapsible Gearshift Micro Column – Paintable Mill

David Ayers Leave a comment
Use This Post Clip for Email

Measuring only 17” long, the new collapsible gearshift micro column with laser-cut diamond pattern from Flaming River allows for optimal clearance in your custom build. In fact, this tilt column came to life by request of an Australian builder, who wanted the added safety of the collapsible feature and asked Flaming River if they would create it.

The FR20020MCLC model features a paintable mill finish; other finishes available. Though the idea is Australian, this product is made in the USA!

Features

  • Collapsible design measures only 17” long.
  • Stainless steel construction, all-new components
  • Available in a variety of finishes
  • Warranty: 3 years
Flaming River 17 Inch Collapsible Gearshift Micro Column FR20020MCLC

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce (413754880): DYAD DS Twin-Disc Clutch

David Ayers Leave a comment
Use This Post Clip for Email

Designed for 1969–1971 Ford 429” 7L engines with -10 spline GM transmission, the 413754880 DYAD DS twin-disc clutch from Centerforce features the company’s centrifugal weight system and ball bearing–actuated pressure plate for superior clamp load and light pedal effort. Organic segmented facings on both sides provide increased holding capacity, smooth drivability, and longevity, while the billet steel flywheel has been lightened to provide lower inertia for quicker RPMs. Match balanced and includes ARP fasteners and alignment tool.

Components designed, machined, and assembled in the USA.

Features

  • For 1969–1971 Ford 429” 7L engines with -10 spline GM transmission
  • Ball bearing pressure plate
  • Centrifugal weight system
  • Lightened billet-steel flywheel
  • Holds 500–1,300 ft/lb torque
  • 51.55 lb assembly weight
Centerforce DYAD DS Twin Disc Clutch for Ford 429 7L -10 Spline GM Transmission 413754880

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

LEED Brakes (RC4001): Rear Drum-to-Disc Brake Conversion Kit for Mopar 8 1/4, 9 1/4 Rear Axles

David Ayers Leave a comment
Use This Post Clip for Email

Sporting all-new, high-quality, precision-machined components that are zinc plated to reduce corrosion, this rear disc conversion kit from LEED Brakes is a smart, reliable, safe upgrade for your Mopar vehicle with 8 1/4 or 9 1/4 rear axle.

This RC4001 kit contains everything you need to mount single-piston disc brakes to your application, including a heavy-duty parking brake caliper that will let you use most stock parking brake cables to actuate your parking brake.

Features

  • For Mopar applications with 8 1/4, 9 1/4 rear axles
  • Rear drum-to-disc brake conversion kit
  • Conversion adds safety, reliability, and performance.
  • All-new, precision-machined components
  • Zinc-plated to reduce corrosion and extend life
  • HD parking brake caliper allows use of most stock parking brake cables.
LEED Brakes Rear Disc Conversion Kit for Mopar 8.25 9.25 Rear Axle RC4001

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.